EUPBWB025 is a dense crimped-wire wheel-brush family for table deburrers and automated machines. Its statically balanced body and high wire count support cutting-edge deburring of pipes, profiles and flat parts across multiple workpiece and burr classes.
| Family code | EUPBWB025 |
|---|---|
| Tool | Crimped-wire wheel brush |
| Machines | Table deburrers and automated machines |
| Fill options | Steel or stainless-steel wire |
| Wire diameters | 0.20; 0.30; 0.35; 0.50 mm |
| Example diameter | 250 mm |
| Example face width | 60 mm |
| Example trim length | 45 mm |
| Example arbor | 100 mm round bore |
| Example maximum speed | 3,600 rpm |
| Example SKU | 0002-576145 |
The brush uses a compact, high-density crimped-wire trim to increase the number of working wire tips. The body is statically balanced for concentric running on production equipment.
Common table-deburrer interfaces are supported through regular bores and double-keyway adaptations; special adapters are also possible.
The family is listed for aluminium, cast materials, non-ferrous metals, sintered metal, wood, stainless steel and steel. Available fill choices include steel and stainless-steel wire.
Wire diameters shown for the family include 0.20, 0.30, 0.35 and 0.50 mm, allowing aggression and conformity to be matched to the burr class.
One listed variant has a 250 mm diameter, 60 mm face width and 45 mm trim length. It uses 0.20 mm steel wire and a 100 mm round arbor hole.
Its maximum speed is 3,600 rpm and the displayed SKU is 0002-576145.
Choose wire material to avoid cross-contamination where stainless or non-ferrous surfaces must retain corrosion performance or appearance. Set penetration at the wire tips and keep the work securely supported.
Check adapter retention, balance, guards and speed marking before operation; replace brushes that develop abnormal vibration or uneven trim loss.
POLISHX technical profile ยท 2026-10-11 20:34:53