{
  "record_id": "11599ab27f7a0ca6",
  "title": "ATLAS Command wear-part system for ATLAS 70 and U70 wheels",
  "kind": "reference",
  "company": "Wheelabrator",
  "parameters": {
    "Manufacturer": "Wheelabrator",
    "System": "ATLAS Command",
    "Compatible blast wheels": "ATLAS 70; U70",
    "Direction variants": "Clockwise; counter-clockwise",
    "Kit contents": "8 blades; control cage; impeller",
    "Conversion requirement": "No conversion kit or wheel modification stated",
    "Stated abrasive reduction": "Up to 40%",
    "Stated combined saving": "15–35% for wear parts and abrasive",
    "Reference type": "Coordinated wear-part system"
  },
  "summary": "ATLAS Command is a coordinated main-wear-part system for existing ATLAS 70 and U70 blast wheels. Its revised internal geometry is intended to improve abrasive flow, slow media breakdown and direct more input energy to the casting surface without a conversion kit or wheel modification.",
  "sections": [
    {
      "heading": "System composition and compatibility",
      "paragraphs": [
        "The system is offered as right-hand/clockwise and left-hand/counter-clockwise kits for ATLAS 70 and U70 blast wheels. Each kit contains eight throwing blades, a control cage and an impeller.",
        "The components are designed to work as a coordinated wear set with extended, synchronised service life. Confirm wheel model and rotation before selecting the kit."
      ]
    },
    {
      "heading": "Operating principle",
      "paragraphs": [
        "Optimised internal geometry manages abrasive flow through the blast wheel with the aim of reducing unnecessary media wear. Slower breakdown retains more usable abrasive and directs a greater share of the supplied energy toward the casting surface.",
        "Because the system replaces routine wear parts, the reviewed configuration does not require a conversion kit or modification to the existing ATLAS 70/U70 wheel. Installation can be aligned with the next planned wear-part change."
      ]
    },
    {
      "heading": "Performance claims and verification",
      "rows": [
        [
          "Abrasive-consumption claim",
          "Up to 40% reduction."
        ],
        [
          "Combined-cost claim",
          "15–35% saving across wear parts and abrasive."
        ],
        [
          "Downtime claim",
          "No additional conversion downtime when installed during routine wear-part replacement."
        ],
        [
          "Maintenance effect",
          "Coordinated parts are intended to simplify maintenance and make operating cost more predictable."
        ]
      ],
      "paragraphs": [
        "These are stated performance ranges, not guaranteed results for every process. Verify them against a documented baseline for media additions, throughput, motor load, cycle time, surface result and part life under comparable production conditions."
      ]
    },
    {
      "heading": "Installation and safety",
      "paragraphs": [
        "Replace the coordinated components as a set according to the correct rotation. Inspect the wheel, hub, liners, fasteners and abrasive feed path while access is open, and verify that no retained media or debris obstructs movement.",
        "Lock out the machine and confirm zero rotation before service. After assembly, check clearances and retention, conduct the approved low-risk startup and confirm the blast pattern before full production."
      ]
    }
  ],
  "updated_at": "2026-10-14"
}