{
  "record_id": "2b8acfa0a643d2a0",
  "title": "GILOX-Series | Almatis",
  "kind": "reference",
  "company": "Almatis",
  "parameters": {
    "Material": "Alumina",
    "Primary particle size": "Up to 25 µm",
    "Process position": "Grinding and pre-polishing",
    "GILOX 63": "Ground P 25; 63 µm top cut",
    "P 20": "Plate-like primary crystals around 20 µm; requires further processing",
    "PBC": "Highly abrasive grade for high cut",
    "Sintered base grades": "T60/T64",
    "Key control": "Grade-specific grain friability"
  },
  "summary": "The Almatis GILOX family comprises mechanically strong, coarse polishing aluminas intended for high cutting rates, grinding and pre-polishing. The range combines primary particles up to 25 µm with controlled friability and includes GILOX 63, P 20 and PBC grades for different preparation routes and cutting intensity.",
  "sections": [
    {
      "heading": "Series design",
      "paragraphs": [
        "GILOX grades are based on mechanically strong alumina crystals that can be classified into different size bands without excessive crystal breakdown. The series is positioned where rapid removal and surface preparation are more important than the final gloss stage.",
        "Particle structure, top cut and friability govern how aggressively a grade fractures and renews its cutting edges during use. These variables should be evaluated together rather than selecting on nominal size alone."
      ]
    },
    {
      "heading": "Grade map",
      "rows": [
        [
          "GILOX 63",
          "Ground version of P 25 with a 63 µm top cut"
        ],
        [
          "P 20",
          "Plate-like primary crystals of about 20 µm; intended for further processing before use"
        ],
        [
          "PBC",
          "Highly abrasive polishing alumina for high cutting"
        ],
        [
          "T60/T64 basis",
          "Sintered aluminas available with grade-specific friability"
        ]
      ]
    },
    {
      "heading": "Process use",
      "paragraphs": [
        "GILOX materials suit compound formulations and pre-polishing steps that must remove defects or establish a controlled starting surface for a finer abrasive. The stronger crystal structure maintains cutting action under load.",
        "A practical sequence is to validate cut rate first, then measure the residual scratch pattern and the time required by the following polish. A coarse grade that removes material quickly can still be inefficient if it leaves scratches that extend the next stage."
      ]
    },
    {
      "heading": "Qualification checks",
      "items": [
        "Confirm actual particle-size distribution and top cut for the supplied grade.",
        "Match friability and carrier system to contact pressure and polishing speed.",
        "Run a controlled panel or coupon test before changing the abrasive loading.",
        "Control airborne powder and consult the applicable safety data before mixing or charging."
      ]
    }
  ],
  "updated_at": "2026-10-12"
}