The Almatis TR family provides crystalline-silica-free polishing aluminas for ferrous and non-ferrous metals. TR 140 is the more abrasive, higher-cut grade, while TR 150 is tuned for a balanced cut and finish.
| Material | Polishing alumina |
|---|---|
| Crystalline silica | Not formulated with crystalline silica |
| Substrates | Ferrous and non-ferrous metals |
| TR 140 | Higher abrasiveness and cutting action |
| TR 150 | Balanced cut and finish |
| Primary use | Industrial metal polishing |
| Selection axis | Cutting intensity versus finish |
| Formulation purpose | Alternative to silica-based compounds |
TR grades are intended for industrial polishing of both ferrous and non-ferrous substrates. Their defining formulation feature is the absence of crystalline silica, while the two grades provide different cut-to-finish balances.
TR 140 is the higher-cut option. TR 150 moderates cutting action to give a more balanced finish, making it the logical comparison grade when a single operation must both remove marks and refine the surface.
| TR 140 | Crystalline-silica-free; increased abrasiveness and higher cutting |
|---|---|
| TR 150 | Crystalline-silica-free; balanced cut and finish |
The absence of crystalline silica does not make an airborne powder process hazard-free. Alumina dust, carrier ingredients and the substrate itself still require an exposure assessment and effective ventilation.
For metal trials, document alloy, initial roughness, tool or pad, surface speed, pressure, compound dose and cycle time. A result on one alloy should not be transferred to another without confirmation.
POLISHX technical profile ยท 2026-10-12