{
  "record_id": "395ab15c83b060e8",
  "title": "Microgrit WA White Fused Aluminum Oxide Series",
  "kind": "reference",
  "company": "Micro Abrasives Corporation",
  "parameters": {
    "Manufacturer": "Micro Abrasives Corporation",
    "Series": "Microgrit WA",
    "Material": "White fused aluminum oxide",
    "Particle morphology": "Blocky discrete crystals",
    "Stated purity": "Above 99% aluminum oxide",
    "Production route": "Fusion of high-purity calcined alumina in electric-arc furnaces",
    "Material behaviour": "High hardness, friability, chemical stability and high melting point",
    "Applications": "Lapping, polishing, coated abrasives, grinding and cut-off wheels, blasting, ceramics, refractories and wear protection"
  },
  "summary": "Microgrit WA is a white fused, blocky aluminium oxide abrasive with discrete crystals and stated purity above 99%. It is positioned for lapping, polishing, coated and bonded abrasives, blasting, ceramics, refractory shapes and wear-protection systems.",
  "sections": [
    {
      "heading": "Material identity",
      "paragraphs": [
        "The WA series is a white fused aluminium oxide produced from high-purity calcined alumina in electric-arc furnaces. The abrasive is described as blocky, with each particle a discrete aluminium oxide crystal and a stated purity above 99%.",
        "Its combination of hardness and friability supports abrasive cutting while allowing particles to break down under load. Chemical stability and high-temperature capability also extend the material into ceramics and refractory applications."
      ]
    },
    {
      "heading": "Application range",
      "items": [
        "Lapping and polishing formulations",
        "Grinding and cut-off wheels",
        "Coated abrasives and blasting media",
        "Investment-casting shells, ceramic shapes and refractories",
        "Laminates, coatings and wear-protection systems"
      ]
    },
    {
      "heading": "Wear-protection use",
      "paragraphs": [
        "For laminate and coating systems, the series is positioned to improve wear performance while supporting optical clarity. Suspension treatments may be used to reduce hard packing and alter suspension behaviour; treatment choice must be matched to the carrier and deposition process."
      ]
    },
    {
      "heading": "Selection and process notes",
      "paragraphs": [
        "Purity and morphology identify the abrasive family but do not define a complete process. Select particle size, surface treatment and loading for the required cut, finish, clarity and wear resistance. Validate dispersion stability, particle pull-out and finished-surface appearance with the actual resin, coating or lapping vehicle."
      ]
    }
  ],
  "updated_at": "2026-10-12 19:32:25"
}