This aluminium-processing guide distinguishes a batch spinner-hanger system from a mesh-belt through-feed system. Both address cleaning and surface treatment while limiting impact and handling conditions that can damage lighter aluminium components.
| Manufacturer | Wheelabrator |
|---|---|
| Spinner-hanger model | SPH-2-3/8 |
| Mesh-belt model | LBS 1000 |
| Primary material | Aluminium parts |
| SPH operations | Descaling, deburring/deflashing and cleaning |
| LBS operations | Rust or heat-scale removal through surface finishing |
| LBS application range | Light to medium duty |
The batch-type spinner-hanger concept suspends parts rather than conveying them loose through a tumble zone. Its stated objectives are flexibility, reliable processing, low stray-abrasive escape and reduced maintenance demand for aluminium components.
The LBS 1000 is a continuous mesh-belt machine intended for light and medium work. It is designed for production-line integration with an ergonomic loading height and covers operations from scale removal to surface finishing.
No fixed cycle time, part capacity or abrasive specification is assigned in this guide because those values depend on the actual aluminium casting and process target.
| Part presentation | Hanger for suspended batches; mesh belt for continuous passage |
|---|---|
| Contact pattern | Hanger separates suspended work; belt supports parts during travel |
| Production mode | Batch versus in-line continuous |
| Key checks | Part geometry, allowable contact, throughput, surface target and abrasive containment |
POLISHX technical profile ยท 2026-10-13 15:38:44