{
  "record_id": "52dc333ae1488e6e",
  "title": "Wheelabrator aluminium blasting systems: SPH-2-3/8 and LBS 1000",
  "kind": "reference",
  "company": "Wheelabrator",
  "parameters": {
    "Manufacturer": "Wheelabrator",
    "Spinner-hanger model": "SPH-2-3/8",
    "Mesh-belt model": "LBS 1000",
    "Primary material": "Aluminium parts",
    "SPH operations": "Descaling, deburring/deflashing and cleaning",
    "LBS operations": "Rust or heat-scale removal through surface finishing",
    "LBS application range": "Light to medium duty"
  },
  "summary": "This aluminium-processing guide distinguishes a batch spinner-hanger system from a mesh-belt through-feed system. Both address cleaning and surface treatment while limiting impact and handling conditions that can damage lighter aluminium components.",
  "sections": [
    {
      "heading": "SPH-2-3/8 spinner-hanger",
      "paragraphs": [
        "The batch-type spinner-hanger concept suspends parts rather than conveying them loose through a tumble zone. Its stated objectives are flexibility, reliable processing, low stray-abrasive escape and reduced maintenance demand for aluminium components."
      ]
    },
    {
      "heading": "LBS 1000 mesh belt",
      "paragraphs": [
        "The LBS 1000 is a continuous mesh-belt machine intended for light and medium work. It is designed for production-line integration with an ergonomic loading height and covers operations from scale removal to surface finishing."
      ]
    },
    {
      "heading": "Choosing between the concepts",
      "rows": [
        [
          "Part presentation",
          "Hanger for suspended batches; mesh belt for continuous passage"
        ],
        [
          "Contact pattern",
          "Hanger separates suspended work; belt supports parts during travel"
        ],
        [
          "Production mode",
          "Batch versus in-line continuous"
        ],
        [
          "Key checks",
          "Part geometry, allowable contact, throughput, surface target and abrasive containment"
        ]
      ],
      "paragraphs": [
        "No fixed cycle time, part capacity or abrasive specification is assigned in this guide because those values depend on the actual aluminium casting and process target."
      ]
    }
  ],
  "updated_at": "2026-10-13 15:38:44"
}