{
  "record_id": "573cb45393a95f33",
  "title": "Oxide layer removal with grinding machine | Hans WEBER Maschinenfabrik GmbH",
  "kind": "reference",
  "company": "Hans WEBER Maschinenfabrik",
  "parameters": {
    "氧化来源": "CO₂ laser cutting",
    "主要后道": "Powder coating; painting; welding",
    "行星系统": "P2 / P6",
    "多旋转系统": "R2",
    "钢丝刷材料": "Spring steel wire hook brush",
    "单侧处理深度": "Up to 25 mm",
    "设备系列": "PT / NLC / TTSC / TTSC plus"
  },
  "summary": "WEBER 氧化层去除工艺用于清理激光切割钢板切边的硬质氧化物，为粉末涂装、喷漆和焊接提供洁净且一致的基面；P2/P6 行星头与 R2 多旋转系统分别覆盖精确刷削和大范围重叠处理。",
  "sections": [
    {
      "heading": "为何需要去氧化层",
      "paragraphs": [
        "CO₂ 激光切割钢材会在切边形成硬质氧化层。残留氧化物会降低涂层附着力，并可能在机械应力下连同涂层脱落，使钢材暴露于腐蚀环境。"
      ]
    },
    {
      "heading": "P2/P6 行星头",
      "paragraphs": [
        "P2 与 P6 配置弹簧钢丝钩刷，利用双重旋转保持刷尖与切边的有效角度。刷具类型、密度、长度、速度和位置均可按材料与板厚调整。"
      ]
    },
    {
      "heading": "R2 多旋转系统",
      "paragraphs": [
        "多组旋转刷单元采用重叠布局，钢丝钩刷可从单侧深入切边最多 25 mm；在去除疏松氧化层的同时轻度粗化表面，提高后续涂装附着条件。"
      ]
    },
    {
      "heading": "适用后道",
      "paragraphs": [
        "适用于粉末涂装、喷漆和焊接前的表面准备。可选机型包括 WEBER PT、NLC、TTSC 与 TTSC plus。"
      ]
    }
  ],
  "updated_at": "2026-10-12 02:31:47"
}