{
  "record_id": "88497e7c3d1445f0",
  "title": "WEBER MDK double-head panel sanding machine",
  "kind": "product",
  "company": "Hans WEBER Maschinenfabrik",
  "parameters": {
    "Manufacturer": "Hans WEBER Maschinenfabrik / WEBER America",
    "Model": "WEBER MDK",
    "sku": "WEBER MDK",
    "Machine type": "Double-head panel sanding machine",
    "Working widths": "1,350 / 1,600 / 1,900 / 2,250 mm",
    "Sanding-belt length": "2,620 mm",
    "Sanding stations": "1–3, freely arranged",
    "Calibration-roller drive": "Up to 110 kW in the technical-specification block",
    "External sanding drives": "Descriptive copy states up to 160 kW per drive",
    "Control": "i-Touch controller and Multi Panel",
    "Feed": "Continuously variable",
    "Processing units": "D contact roller + P cushion + K combination unit",
    "Workpieces": "Fibre and panel materials; veneer and plywood configurations are discussed"
  },
  "summary": "WEBER MDK is a modular double-head sanding machine for double-sided processing of fibre and panel materials. Its technical configuration covers 1,350, 1,600, 1,900 and 2,250 mm working widths, a 2,620 mm sanding belt and one to three freely arranged sanding stations with D, P and K processing units.",
  "sections": [
    {
      "heading": "Machine specification",
      "rows": [
        [
          "Model",
          "WEBER MDK"
        ],
        [
          "Working widths",
          "1,350 / 1,600 / 1,900 / 2,250 mm"
        ],
        [
          "Sanding-belt length",
          "2,620 mm"
        ],
        [
          "Sanding stations",
          "1–3; arrangement freely selectable"
        ],
        [
          "Calibration-roller drive",
          "Up to 110 kW in the machine technical-specification block"
        ],
        [
          "Control",
          "i-Touch controller and Multi Panel"
        ],
        [
          "Feed",
          "Continuously variable"
        ],
        [
          "Processing units",
          "D contact roller, P cushion and K combination unit"
        ]
      ],
      "paragraphs": [
        "The machine is intended for double-sided processing of fibre and panel materials and can be integrated into industrial production lines. External drive frames isolate the sanding drives from the machine body to reduce vibration transfer."
      ]
    },
    {
      "heading": "Modular configuration context",
      "paragraphs": [
        "Descriptive copy on the page states that the modular column design can support up to eight processing stations, while the technical machine block specifies one to three sanding stations. These statements are retained separately because processing stations in an extended modular line are not necessarily equivalent to the configured sanding-station count.",
        "The introduction also describes external sanding drives up to 160 kW per drive, whereas the machine technical block lists the calibration-roller drive up to 110 kW. Drive power therefore has to be matched to the selected unit and ordered configuration."
      ]
    },
    {
      "heading": "Processing-unit roles",
      "rows": [
        [
          "D contact roller",
          "Calibration, pre-sanding and fine sanding; grooved steel or rubber roller; programme-controlled grit compensation"
        ],
        [
          "P cushion unit",
          "Gentle finishing of veneer, profiled and coated surfaces"
        ],
        [
          "K combination unit",
          "Contact roller plus sanding beam for calibration followed by fine finishing"
        ],
        [
          "D-unit adjustment",
          "Electric roller positioning; calibration stated within a 0.01 mm range"
        ],
        [
          "K-unit adjustment",
          "0.02 mm adjustment accuracy; synchronous or counter-rotating direction"
        ]
      ],
      "paragraphs": [
        "The published unit data are series-dependent. Roller diameter, hardness and drive rating vary with the selected station and must not be treated as one fixed MDK-wide value."
      ]
    },
    {
      "heading": "Production and maintenance boundaries",
      "paragraphs": [
        "The freely selectable station arrangement, central machine-parameter control and external drive frames support line-specific configuration. Electronically controlled link pressure beams are described for veneer and plywood sanding-pad stations.",
        "The reviewed page does not provide one overall machine footprint, mass, electrical supply, dust-extraction airflow or finished-panel tolerance. Those installation and acceptance values remain configuration-specific and are not inferred here."
      ]
    }
  ],
  "updated_at": "2026-10-13 23:40:37"
}