{
  "record_id": "89fa6565bf694355",
  "title": "Lapmaster Wolters AC 1200 P polishing machine",
  "kind": "product",
  "company": "Lapmaster Wolters",
  "parameters": {
    "Record type": "Product",
    "Manufacturer": "Lapmaster Wolters / Peter Wolters",
    "Model": "AC 1200 P",
    "Process": "Precision polishing",
    "Maximum workpiece diameter": "340 mm",
    "Maximum workpiece thickness": "50 mm",
    "Platen control": "UPAC (Upper Platen Adaptive Control)",
    "Loading": "Pneumatic",
    "Upper work disk": "Swivel-out",
    "Outer pin ring": "Optional driven configuration",
    "Control": "Siemens PLC with KP1200 Comfort panel"
  },
  "summary": "Precision polishing machine for workpieces up to 340 mm diameter and 50 mm thickness. The AC 1200 P combines UPAC upper-platen control, pneumatic loading and a swing-away upper work disk; a driven outer pin ring is available as an option for the qualified process configuration.",
  "sections": [
    {
      "heading": "Workpiece capacity",
      "rows": [
        [
          "Maximum diameter",
          "340 mm"
        ],
        [
          "Maximum thickness",
          "50 mm"
        ],
        [
          "Process",
          "Precision polishing"
        ],
        [
          "Outer pin ring",
          "Driven option available"
        ]
      ]
    },
    {
      "heading": "Handling and control",
      "paragraphs": [
        "Pneumatic loading supports controlled engagement of the polishing assembly. The upper work disk swings away to provide access for loading, carrier inspection and maintenance."
      ],
      "items": [
        "UPAC provides adaptive control of the upper platen.",
        "Thermal stabilization extends across the tool surface.",
        "A stable cast-iron bed supports the process assembly.",
        "The Siemens PLC is paired with a KP1200 Comfort operating panel.",
        "RangeCare remote maintenance is listed for the platform."
      ]
    },
    {
      "heading": "Process setup",
      "items": [
        "Confirm carrier, pin-ring and workpiece clearances before rotation.",
        "Use a validated pad or plate, slurry and pressure combination for the material.",
        "Condition the polishing surface and stabilize temperature before a precision batch.",
        "Monitor thickness removal and surface response during recipe qualification.",
        "Inspect the optional driven pin ring and carrier engagement at planned intervals."
      ]
    },
    {
      "heading": "Selection note",
      "paragraphs": [
        "The 340 × 50 mm envelope is a maximum workpiece boundary. Achievable flatness, parallelism, finish and removal rate depend on geometry, incoming condition, consumables and the qualified recipe."
      ],
      "items": [
        "Keep personnel outside the guarded motion envelope.",
        "Isolate pneumatic and electrical energy before service.",
        "Control slurry exposure according to its safety data and the installed extraction system."
      ]
    }
  ],
  "updated_at": "2026-10-12T22:40:15.161Z"
}