{
  "record_id": "980f40e2d88c0cd2",
  "title": "WEBER KSE Sanding machine | Hans WEBER Maschinenfabrik GmbH",
  "kind": "reference",
  "company": "Hans WEBER Maschinenfabrik",
  "parameters": {
    "Machine type": "Automatic wide-belt sanding machine",
    "Workpiece thickness": "3–200 mm",
    "Machine combinations": "16",
    "Preconfigured variants": "DM and CM",
    "Materials": "Solid wood, veneer and lacquered workpieces",
    "Optional cross-sanding": "Available",
    "Combination-unit roller diameter": "130 mm",
    "Combination-unit adjustment accuracy": "0.02 mm",
    "Cross-belt drive": "15 kW"
  },
  "summary": "WEBER KSE is a compact automatic sanding platform for solid wood, veneer, lacquer and decorative finishes. Sixteen documented machine combinations and a 3–200 mm workpiece range bring calibration, fine sanding, cross sanding and brush finishing into a space-efficient system.",
  "sections": [
    {
      "heading": "Compact production role",
      "paragraphs": [
        "KSE is intended for smaller workshops and production cells that need automatic, repeatable sanding without the footprint of a large multi-station line. DM and CM variants provide defined starting configurations.",
        "The 3–200 mm workpiece range spans thin panels through thick timber components, subject to the selected setup."
      ]
    },
    {
      "heading": "Calibration and finishing",
      "paragraphs": [
        "Steel or rubber contact rollers support calibration, pre-sanding and fine sanding. The combination station pairs a contact roller with a sanding beam so stock removal and sensitive finishing can occur in sequence."
      ]
    },
    {
      "heading": "Cross-grain and multidirectional options",
      "paragraphs": [
        "The optional 15 kW cross-belt station sands across the wood grain to reduce visible longitudinal marks before staining or coating. A P2 planetary head can provide multidirectional surface treatment and edge rounding."
      ]
    },
    {
      "heading": "Selection boundary",
      "paragraphs": [
        "The 16 configurations do not share every unit or power value. Workpiece material, calibration allowance, finish system, required grain direction and dust extraction determine the installed station set and abrasive sequence."
      ]
    }
  ],
  "updated_at": "2026-10-11 18:39:25"
}