POLISHX

Microclear Supreme Aluminum Oxide Polishing Powder Series

Microclear Supreme is a low-dust aluminum oxide polishing powder family offered in Finish, Polish and Cut grades. Typical properties include pH 8.0–11.0, 75–100% alpha alumina and primary crystals of 0.3–0.5 µm, with blend particle ranges selected for the required removal rate and finish.

ManufacturerMicro Abrasives Corporation
SeriesMicroclear Supreme
MaterialAluminum oxide polishing powder
GradesSupreme Finish, Supreme Polish and Supreme Cut
Typical grade sizesFinish greater than 2 µm; Polish 4–6 µm; Cut 4–15 µm
Typical pH8.0–11.0
Typical alpha alumina75–100%
Primary crystal size0.3–0.5 µm
Packaging110 lb drums; 500 lb and 1,000 lb bulk bags
Target surfacesAutomotive clear coats, acrylics, marine surfaces, chrome, aluminium and stainless steel

Series positioning

Supreme is a dry polishing-powder family formulated around three cut-to-finish positions. The supplier describes low-dust behaviour when used with the correct chemistry, fast removal and long working life at the point of use.

Because Supreme Cut is a blended material, coarse-particle content may vary. Grade labels and typical ranges are selection aids and do not replace an agreed incoming specification.

Typical properties

Supreme FinishAverage particle size listed as greater than 2 µm
Supreme PolishAverage particle size 4–6 µm
Supreme CutAverage particle size 4–15 µm; blended material
pH8.0–11.0
Alpha alumina75–100%
Primary crystal size0.3–0.5 µm

Applications

Packaging and validation

Standard packaging is listed as 110 lb drums and 500 lb or 1,000 lb bulk bags, with custom packaging possible. Before scale-up, validate dust control, dispersion, removal rate, gloss, scratch pattern and residue with the intended chemistry and polishing system.

POLISHX technical profile · 2026-10-12 19:35:43