{
  "record_id": "a44d24b161c93a01",
  "title": "Lapmaster Wolters AC 535 D double-sided fine grinding machine",
  "kind": "product",
  "company": "Lapmaster Wolters",
  "parameters": {
    "Record type": "Product",
    "Manufacturer": "Lapmaster Wolters / Peter Wolters",
    "Model": "AC 535 D",
    "Process": "Double-sided fine grinding",
    "Maximum workpiece diameter": "170 mm",
    "Maximum workpiece thickness": "50 mm",
    "Loading": "High-precision pneumatic; optional manual loading table",
    "Upper work disk": "Swivel-out",
    "Measurement": "Non-contact process control",
    "Machine bed": "Cast iron",
    "Control": "Siemens PLC with KP1200 Comfort panel"
  },
  "summary": "Double-sided fine-grinding machine for workpieces up to 170 mm diameter and 50 mm thickness. The AC 535 D combines a high-precision pneumatic loading system, optional manual loading table, swing-away upper work disk, non-contact measuring control and a cast-iron machine bed.",
  "sections": [
    {
      "heading": "Workpiece and loading range",
      "rows": [
        [
          "Maximum diameter",
          "170 mm"
        ],
        [
          "Maximum thickness",
          "50 mm"
        ],
        [
          "Standard loading",
          "High-precision pneumatic"
        ],
        [
          "Alternative loading",
          "Manual loading table"
        ]
      ]
    },
    {
      "heading": "Access and stability",
      "paragraphs": [
        "The upper work disk swivels away from the work zone for loading, unloading and tool inspection. Thermal stabilization is applied across the tool surface, while the cast-iron bed provides the structural base for double-sided processing."
      ],
      "items": [
        "Non-contact measuring control supports dimensional process monitoring.",
        "KP1200 Comfort panel provides the operator interface.",
        "The machine is configured for repeatable flatness, thickness and plane-parallelism work.",
        "RangeCare remote service capability is listed for the platform."
      ]
    },
    {
      "heading": "Setup and maintenance",
      "items": [
        "Verify carrier and component fit inside the 170 × 50 mm envelope.",
        "Bring tooling to the validated thermal condition before dimensional qualification.",
        "Confirm loading-force settings after changing component families.",
        "Inspect plates, carriers and measurement surfaces on a documented interval.",
        "Keep guards and interlocks active; isolate stored energy before maintenance."
      ]
    }
  ],
  "updated_at": "2026-10-12T23:31:08.133Z"
}