{
  "record_id": "aaf562d52e9c45a1",
  "title": "Foundry Surface Prep Solutions | Wheelabrator",
  "kind": "reference",
  "company": "Wheelabrator",
  "parameters": {
    "Manufacturer": "Wheelabrator",
    "Industry": "Foundries and forges",
    "Iron/steel operations": "Deburring; desanding; decoring; cleaning",
    "Forge operation": "Decoring",
    "Non-ferrous scope": "Light-metal castings",
    "Methods": "Wheelblast; airblast; wet blast"
  },
  "summary": "Foundry and forge surface-preparation guide covering deburring, sand removal, core removal and cleaning of iron and steel castings, decoring of forged components, and blast treatment of non-ferrous light-metal castings.",
  "sections": [
    {
      "heading": "Industry scope",
      "paragraphs": [
        "The reference distinguishes iron and steel foundries and forges from non-ferrous foundries. Iron and steel work includes deburring, desanding, decoring and cleaning of castings, with decoring also identified for forged parts.",
        "Non-ferrous coverage is stated separately for light-metal castings. Equipment, media and impact energy must therefore be selected for the alloy, casting robustness and required downstream surface condition."
      ]
    },
    {
      "heading": "Verified process map",
      "rows": [
        [
          "Iron and steel castings",
          "Deburring, desanding, decoring and cleaning"
        ],
        [
          "Forged parts",
          "Decoring"
        ],
        [
          "Non-ferrous foundries",
          "Blast treatment of light-metal castings"
        ],
        [
          "Equipment families",
          "Wheelblast, airblast and wet blast"
        ],
        [
          "Primary objective",
          "Controlled removal of adhering sand, cores, scale or edge defects before downstream operations"
        ]
      ]
    },
    {
      "heading": "Equipment and media selection",
      "paragraphs": [
        "Use wheelblast where production volume and workpiece robustness support high-throughput media delivery. Airblast provides localized control for complex geometry, while wet blast is an option where dust reduction or a different surface interaction is required.",
        "Before production, qualify media type, size, hardness, impact energy, coverage and cycle time against casting damage, dimensional limits and the following coating or machining operation."
      ]
    },
    {
      "heading": "Operating controls and maintenance",
      "paragraphs": [
        "Monitor media mix, separator efficiency, wheel or nozzle wear, liner condition and dust extraction. Excess fines, sand carryover or damaged separators can reduce cleaning consistency and accelerate wear.",
        "Keep guards and interlocks active, confirm that workpieces cannot jam or damage the handling system, and isolate stored energy before maintenance. Foundry dust and residual sand require task-specific exposure and housekeeping controls."
      ]
    }
  ],
  "updated_at": "2026-10-14T06:36:55.294Z"
}