POLISHX

Microgrit SIC Silicon Carbide Abrasive Series

Microgrit SIC is a precision water-classified silicon carbide abrasive made from high-purity silica sand and petroleum coke in a resistance furnace. With stated Mohs hardness above 9.0 and a sharp, friable crystal structure, it is positioned for precision lapping, grinding, polishing and wear-resistant systems.

ManufacturerMicro Abrasives Corporation
SeriesMicrogrit SIC
MaterialSilicon carbide
Stated hardnessMohs 9.0+
Feed materialsHigh-purity silica sand and petroleum coke
Furnace typeResistance furnace
ClassificationPrecision water classification
Particle behaviourSharp crystalline structure with inherent friability
ApplicationsPrecision lapping, grinding, polishing, bonded and coated abrasives, ceramics, refractories, composites and wear-resistant floors

Material production

The SIC series is produced from the reaction of high-purity silica sand with petroleum coke in a resistance-type furnace. The resulting silicon carbide is precision water classified to control the supplied particle-size grade.

The material is stated above 9.0 on the Mohs hardness scale. Its sharp crystalline structure is friable, so fresh cutting edges are exposed as particles fracture during use.

Finishing behaviour

High hardness and continuously renewed cutting edges support rapid, clean cutting in lapping, grinding and polishing. Actual stock-removal rate, finish and abrasive life depend on grade, concentration, carrier, pressure, speed and substrate hardness.

Application range

Selection and safety

The family page does not state a complete grade table, so no particle sizes are inferred here. Select the required distribution from the current grade specification. Control airborne dust, use suitable extraction and personal protective equipment, and validate scratch pattern and subsurface damage on representative material.

POLISHX technical profile ยท 2026-10-12 19:34:43