This double-sided silicon-carbide dressing stone combines coarse 30 grit and fine 60 grit in one manual tool. The coarse face profiles and dresses large mounted points with coarse bonds and grain, while the fine face is intended for mounted points with finer bonds and abrasive grain.
| Product | Double-sided dressing stone |
|---|---|
| Abrasive | Silicon carbide |
| Grits | 30 coarse / 60 fine |
| Length | 4-3/4 in |
| Width | 2 in |
| Height | 1-1/4 in |
| Global part number | 33401010 |
| EDP number | 39011 |
| Packaging unit | 5 pieces |
| Operation | Manual dressing and profiling |
The upper coarse side is 30 grit and is intended for profiling and dressing larger mounted points with coarse bond and grain structures.
The underside is 60 grit for profiling and dressing mounted points with finer bonds and grain. Keeping the two faces identified prevents an unintended coarse step on a fine wheel.
The stone is listed at 4-3/4 inches long, 2 inches wide and 1-1/4 inches high. The global part number is 33401010 and the EDP number is 39011.
The documented packaging unit contains five pieces.
The tool is applied manually for cleaning and sharpening abrasive products. Dressing restores a workable abrasive surface and corrects the profile rather than serving as a workpiece-finishing stone.
Support the mounted point securely and use controlled, even contact across the selected stone face.
Inspect the stone for cracks, chips and contamination before use. Keep the coarse and fine faces clean so transferred debris does not change the cutting action.
Use eye and hand protection and avoid impact loading; the stone is a brittle abrasive product.
POLISHX technical profile · 2026-10-11 21:40:48