{
  "record_id": "b6c0e733bdf75d07",
  "title": "Wood sanding machine WEBER KSF | Hans WEBER Maschinenfabrik GmbH",
  "kind": "reference",
  "company": "Hans WEBER Maschinenfabrik",
  "parameters": {
    "Machine type": "Industrial modular sanding line",
    "Processing stations": "Up to 8",
    "Working widths": "2 options",
    "Materials": "Wood, veneer and lacquered panels",
    "Planing-shaft diameters": "180 or 240 mm",
    "Contact-roller drive": "Up to 160 kW by configuration",
    "CBF drive": "Up to 30 kW",
    "CBF cutting speed": "Approximately 2–25 m/s",
    "Cross-belt drive": "15 kW"
  },
  "summary": "WEBER KSF is a high-capacity modular sanding platform for continuous industrial processing of wood, veneer and lacquered panels. Up to eight stations can combine planing, calibration, cross sanding, CBF finishing, planetary processing and brushing.",
  "sections": [
    {
      "heading": "Industrial process chain",
      "paragraphs": [
        "Up to eight stations support a long, application-specific sequence. A heavy-removal or planing stage can be followed by calibration, cross sanding, pressure-beam finishing and surface brushing within one machine platform."
      ]
    },
    {
      "heading": "Planing and calibration",
      "paragraphs": [
        "The optional planing unit uses 180 or 240 mm shafts with individually replaceable cutters for high removal rates. Contact rollers then provide dimensional calibration or controlled pre-sanding before fine stages."
      ]
    },
    {
      "heading": "Fine-surface technologies",
      "paragraphs": [
        "The CBF combination unit interrupts continuous abrasive contact to reduce oscillation marks while maintaining dimensional control. Cross-belt, P2 planetary and brush modules add grain-direction control, edge treatment, texturing and final cleaning."
      ]
    },
    {
      "heading": "Configuration boundary",
      "paragraphs": [
        "Power figures are maximums for particular series arrangements, not a specification for every KSF. Feed rate, removal allowance, number of stations and dust load must be engineered together for continuous or multi-shift duty."
      ]
    }
  ],
  "updated_at": "2026-10-11 18:39:29"
}