EUPBRB001 is an industrial crimped-wire roller brush for deburring machines. Its dense, uniform trim is designed for consistent deburring, weld-seam finishing and removal of rust or paint across a wide working face.
| Family code | EUPBRB001 |
|---|---|
| Tool type | Crimped-wire roller brush |
| Machine | Deburring machine |
| Applications | Deburring; weld finishing; rust and paint removal |
| Example diameter | 300 mm |
| Example face width | 460 mm |
| Example trim length | 60 mm |
| Example arbor hole | 120 mm |
| Example fill | Steel wire, 0.35 mm |
| Example SKU | 4602-7431780 |
The tool is a roller brush with crimped wire and a dense, uniformly distributed trim. This layout spreads contact across the face to support a homogeneous finish.
The documented fill material is steel wire in a 0.35 mm diameter example.
The family is listed for deburring, weld-seam finishing, derusting and paint removal. It is intended for installation in a deburring machine rather than freehand use.
Material options shown for the family include aluminium, cast material, hard and soft wood, non-ferrous metal, stainless steel and steel; the fill choice must remain compatible with the workpiece.
A documented variant uses a 300 mm brush diameter, 460 mm face width, 60 mm trim length and 120 mm arbor hole. The listed steel wire diameter is 0.35 mm.
The corresponding displayed SKU is 4602-7431780. These values describe one family member and should be checked against the machine spindle and working-width requirement.
Brush penetration should be limited to the trim deflection needed for the task; excessive pressure bends the wire, raises heat and shortens service life.
Confirm rotation direction, guarding and speed rating before use. Keep stainless work isolated from carbon-steel contamination when finish integrity requires it.
POLISHX technical profile ยท 2026-10-11 19:44:55