POLISHX

WEBER TTSC plus sheet-metal finishing machine

WEBER TTSC plus is a compact-class sheet-metal finishing machine with a 1,350 mm working width and three processing stations. Its D–P2–R2 configuration combines contact-roller sanding, planetary-head edge rounding and multi-rotation brushing for deburring, surface finishing and edge radii up to R2 on ferrous and non-ferrous sheet.

ManufacturerHans WEBER Maschinenfabrik / WEBER America
ModelWEBER TTSC plus
skuTTSC plus
Working width1,350 mm
Processing stations3
Workpiece thickness0.3–100 mm (technical-specification block); headline also states 0.5–100 mm
Sanding-belt driveUp to 19 kW
Controlleri-Touch
Processing systemsD contact roller + P2 planetary head + R2 multi-rotation brush
P2 speed850–1,700 rpm
P2 driveUp to 5.2 kW
R2 speed30–150 rpm
R2 cutting speed5–20 m/s
R2 drive2.6 kW per unit
Edge roundingUp to R2
MaterialsFerrous and non-ferrous sheet

Core machine specification

A headline on the same page also states 0.5–100 mm workpiece thickness, while the technical-specification block states 0.3–100 mm. Both values are retained here as a source-page discrepancy; machine selection should use the confirmed configuration specification.

ModelWEBER TTSC plus
Working width1,350 mm
Processing stations3
Workpiece thickness0.3–100 mm in the technical-specification block
Sanding-belt driveUp to 19 kW
Controli-Touch controller
Configured systemsD contact roller, P2 planetary head and R2 multi-rotation brush

Processing units

The three stations are independently configurable. P2 targets uniform inner- and outer-contour rounding; R2 uses intermeshing vertical brushes and is positioned for coated, galvanized and thin sheet; the contact roller supports controlled material removal and surface work.

D contact rollerRubber-coated roller for deburring, rough grinding and surface grinding; multiple belt types can be used
P2 planetary headFrequency-controlled speed 850–1,700 rpm; drive up to 5.2 kW; electrical height adjustment
R2 multi-rotation brush2.6 kW drive per unit; 30–150 rpm; cutting speed 5–20 m/s; electrical height adjustment
Edge-rounding resultUp to R2 is stated for the configured machine

Workpiece and process scope

The oscillation control can be deactivated to help avoid visible oscillation marks. The page also describes program-controlled positioning of processing stations and automatic thickness measurement.

MaterialsFerrous and non-ferrous sheet
Workpiece conditionsPerforated, foil-coated and scaled sheet are explicitly included
ProcessesDeburring, edge rounding, slag or heavy laser-spatter removal and surface sanding
Standard equipment packageVacuum table, automatic tool-length measurement and oscillation-free sanding-belt control

Access and specification boundaries

Doors on both sides provide access to processing units; the P2 unit has a side pull-out and the rotary-brush area a tailgate. These access features support tool changes and maintenance.

The reviewed page does not supply a single overall machine footprint, mass, feed-speed range, electrical supply or required dust-extraction airflow. Those values are therefore not assigned to this record and must be confirmed for the ordered configuration.

POLISHX technical profile · 2026-10-13 23:39:38