Microclear DS is a water-based aluminum oxide polishing slurry family supplied at 37.5–38.5% solids. Six listed size grades extend from 0.9 µm to 10 µm average particle size, with typical pH 9.2 and alpha-alumina content of 80–90%.
| Manufacturer | Micro Abrasives Corporation |
|---|---|
| Series | Microclear DS |
| Material | Aluminum oxide polishing slurry |
| Appearance | White slurry |
| Supply form | 38% water/alumina slurry |
| Typical solids | 37.5–38.5% |
| Typical pH | 9.2 |
| Typical alpha alumina | 80–90% |
| Grades | DS .5, DS1, DS2, DS6, DS8 and DS10/12 |
| Packaging | 50 lb pails or 600 lb drums |
| Target surfaces | Automotive clear coats, marine surfaces, chrome, aluminium, stainless steel, plastic and acrylic |
The DS series is a wet-milled polishing alumina supplied as a water-based white slurry. Calcination is controlled by surface-area specification, with standard and high surface-area versions described for different polishing responses.
The slurry form reduces the need to disperse a dry powder at the point of use. Solids, particle distribution and surface area remain key inputs to removal rate and finish.
| DS .5 average particle size | 0.9 µm |
|---|---|
| DS1 average particle size | 1.5 µm |
| DS2 average particle size | 2.3 µm |
| DS6 average particle size | 6.0 µm |
| DS8 average particle size | 8.2 µm |
| DS10/12 average particle size | 10 µm |
| Solids | 37.5–38.5% |
| pH | 9.2 |
| Alpha alumina | 80–90% |
Typical values are guidance, not finished-process guarantees. Confirm grade, surface-area version and any requested special chemistry before qualification. Maintain slurry homogeneity during storage and use, prevent contamination, and validate removal rate, gloss, residue and scratch pattern on representative workpieces.
POLISHX technical profile · 2026-10-12 19:37:09