Black Glass-Filled Epoxy Powder, Non-stick1(US)
Also listed as: Black Glass-Filled Epoxy Powder
Refer to the original PDF for tables, figures and page layout.
Page 1\n \nPage 1/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\n59.1.0\n* 1 Identification\n· Product name: Black Glass-Filled Epoxy Powder, Non-stick\n· Part number: 150-10105 - 150-10110\n· Application of the substance / the mixture Thermoset molding\n· Details of the supplier of the safety data sheet\n· Manufacturer/Supplier:\nAllied High Tech Products Inc.\n16207 Carmenita Road\nUSA-Cerritos, CA, 90703\nUSA\ninfo@alliedhightech.com\n· Information department: Product safety department\n· Emergency telephone number:\nDuring normal opening times: +1 (310) 635-2466\nChemtrec: +1 (202) 483-7616\n2 Hazard(s) identification\n· Classification of the substance or mixture\nGHS08 Health hazard\nSensitization - Respiratory 1 H334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.\nCarcinogenicity 1A\nH350 May cause cancer.\nGHS05 Corrosion\nEye Damage 1\nH318 Causes serious eye damage.\nGHS09 Environment\nAquatic Chronic 2\nH411 Toxic to aquatic life with long lasting effects.\nGHS07\nSensitization - Skin 1\nH317 May cause an allergic skin reaction.\nAquatic Acute 2\nH401 Toxic to aquatic life.\nCombustible Dust\n \nMay form combustible dust concentrations in air.\n(Contd. on page 2)\n\n\nPage 2\nPage 2/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Black Glass-Filled Epoxy Powder, Non-stick\n(Contd. of page 1)\n59.1.0\n· Label elements\n· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).\n· Hazard pictograms\nGHS05\nGHS08\nGHS09\n· Signal word Danger\n· Hazard-determining components of labeling:\nQuartz (SiO2)\ntetrachlorophthalic anhydride\nCarbon black\nhexachlorobenzene\n· Hazard statements\nCauses serious eye damage.\nMay cause allergy or asthma symptoms or breathing difficulties if inhaled.\nMay cause an allergic skin reaction.\nMay cause cancer.\nToxic to aquatic life with long lasting effects.\nMay form combustible dust concentrations in air.\n· Precautionary statements\nObtain special instructions before use.\nDo not handle until all safety precautions have been read and understood.\nAvoid breathing dust/fume/gas/mist/vapors/spray\nContaminated work clothing must not be allowed out of the workplace.\nAvoid release to the environment.\nWear protective gloves/protective clothing/eye protection/face protection.\n[In case of inadequate ventilation] wear respiratory protection.\nIf on skin: Wash with plenty of water.\nIf inhaled: If breathing is difficult, remove person to fresh air and keep comfortable for breathing.\nIf in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.\nImmediately call a poison center/doctor.\nIF exposed or concerned: Get medical advice/attention.\nSpecific treatment (see on this label).\nIf skin irritation or rash occurs: Get medical advice/attention.\nIf experiencing respiratory symptoms: Call a poison center/doctor.\nWash contaminated clothing before reuse.\nCollect spillage.\nStore locked up.\nDispose of contents/container in accordance with local/regional/national/international regulations.\n3 Composition/information on ingredients\n· Chemical characterization: Mixtures\n· Description: Mixture of the substances listed below with nonhazardous additions.\n· Hazardous components and components with occupational exposure limits:\n14808-60-7 Quartz (SiO2)\n Carcinogenicity 1A, H350\n50-60%\n117-08-8 tetrachlorophthalic anhydride\n Sensitization - Respiratory 1, H334;\n Eye Damage 1, H318;\n Aquatic Acute 1, H400; Aquatic Chronic 1,\nH410;\n Sensitization - Skin 1, H317\n5-10%\n557-05-1 zinc distearate, pure\n1-5%\n(Contd. on page 3)\n\n\nPage 3\nPage 3/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Black Glass-Filled Epoxy Powder, Non-stick\n(Contd. of page 2)\n59.1.0\n1333-86-4 Carbon black\n Self-heating substances and mixtures 2, H252;\n Carcinogenicity 2, H351\n1-5%\n2421-28-5 benzophenone-3,3',4,4'-tetracarboxylic dianhydride\n Eye Irritation 2A, H319; Specific Target Organ Toxicity - Single Exposure 3, H335\n1-5%\n118-74-1 hexachlorobenzene\n Carcinogenicity 2, H351; Specific Target Organ Toxicity - Repeated Exposure 1, H372;\n Aquatic Acute 1,\nH400; Aquatic Chronic 1, H410\n0.25-≤1%\n1344-95-2 Silicic acid, calcium salt\n≤1%\n111-90-0 Diethylene glycol monoethyl ether\nFlammable Liquids 4, H227\n≤1%\n· Non-hazardous components:\n25036-25-3 Alkyl phenol polyether\n20-30%\n65997-17-3 Fibrous Glass\n5-10%\n68476-03-9 Montan wax acids\n≤1%\n136-53-8 Ethylhexanoic acid zinc salt\n Flammable Liquids 3, H226\n≤1%\n· Additional information:\nMixture contains a higher quartz and carbon black content than standard Epoxy Powder.\nThe specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.\n4 First-aid measures\n· Description of first aid measures\n· After inhalation:\nSupply fresh air and to be sure call for a doctor.\nIn case of unconsciousness place patient stably in side position for transportation.\n· After skin contact: Immediately wash with water and soap and rinse thoroughly.\n· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.\n· After swallowing: If symptoms persist consult doctor.\n· Information for doctor:\n· Most important symptoms and effects, both acute and delayed\nBreathing difficulty\nCoughing\nAllergic reactions\nDermatitis\nEye irritation\n· Indication of any immediate medical attention and special treatment needed No further relevant information available.\n5 Fire-fighting measures\n· Extinguishing media\n· Suitable extinguishing agents: Use fire fighting measures that suit the environment.\n· Special hazards arising from the substance or mixture No further relevant information available.\n· Advice for firefighters\n· Protective equipment: Wear fully protective suit.\n6 Accidental release measures\n· Personal precautions, protective equipment and emergency procedures\nWear protective equipment. Keep unprotected persons away.\nEnsure adequate ventilation\n· Environmental precautions:\nDo not allow product to reach sewage system or any water course.\nDo not allow to enter sewers/ surface or ground water.\nInform respective authorities in case of seepage into water course or sewage system.\n· Methods and material for containment and cleaning up:\nUse neutralizing agent.\n(Contd. on page 4)\n\n\nPage 4\nPage 4/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Black Glass-Filled Epoxy Powder, Non-stick\n(Contd. of page 3)\n59.1.0\nDispose contaminated material as waste according to section 13.\nEnsure adequate ventilation.\n· Reference to other sections\nSee Section 7 for information on safe handling.\nSee Section 8 for information on personal protection equipment.\nSee Section 13 for disposal information.\n7 Handling and storage\n· Handling:\n· Precautions for safe handling\nDust well.\nEnsure proper ventilation/exhaustion at workplaces.\nOpen and handle receptacle with care.\n· Information about protection against explosions and fires: No special measures required.\n· Conditions for safe storage, including any incompatibilities\n· Storage:\n· Requirements to be met by storerooms and receptacles:\nStore in a cool location.\nNo special requirements.\n· Information about storage in one common storage facility: Not required.\n· Further information about storage conditions:\nKeep receptacle tightly sealed.\nStore receptacle in a well ventilated area.\n· Specific end use(s) No further relevant information available.\n8 Exposure controls/personal protection\n· Additional information about design of technical systems: No additional data. See 7.\n· Control parameters\n· Components with limit values that require monitoring at the workplace:\nThe following constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure limit.\nAt this time, the other constituents have no known exposure limits.\n14808-60-7 Quartz (SiO2)\nPEL\nLong-term value: 0.05* mg/m³\n*resp. dust; 30mg/m3/%SiO2+2\nREL\nLong-term value: 0.05* mg/m³\n*respirable dust; See Pocket Guide App. A\nTLV\nLong-term value: 0.025* mg/m³\n*respirable particulate matter, A2\n557-05-1 zinc distearate, pure\nPEL\nLong-term value: 15* 5** mg/m³\n*total dust **respirable fraction\nREL\nLong-term value: 10* 5** mg/m³\n*total dust **respirable fraction\nTLV\nLong-term value: 10* 3** mg/m³\n*inhalable, **respirable particulate matter, *A4\n1333-86-4 Carbon black\nPEL\nLong-term value: 3.5 mg/m³\nREL\nLong-term value: 3.5* mg/m³\n*0.1 in presence of PAHs;See Pocket Guide Apps.A+C\nTLV\nLong-term value: 3* mg/m³\n*inhalable fraction, A3\n(Contd. on page 5)\n\n\nPage 5\nPage 5/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Black Glass-Filled Epoxy Powder, Non-stick\n(Contd. of page 4)\n59.1.0\n118-74-1 hexachlorobenzene\nTLV\nLong-term value: 0.002 mg/m³\nSkin, A3\n1344-95-2 Silicic acid, calcium salt\nPEL\nLong-term value: 15* 5** mg/m³\n*total dust **respirable fraction\nREL\nLong-term value: 10* 5** mg/m³\n*total dust **respirable fraction\nTLV\nsynthetic nonfibrous: TLV withdrawn, see App. B\n111-90-0 Diethylene glycol monoethyl ether\nWEEL Long-term value: 25 ppm\n· Exposure controls\n· Personal protective equipment:\n· General protective and hygienic measures:\nKeep away from foodstuffs, beverages and feed.\nImmediately remove all soiled and contaminated clothing.\nWash hands before breaks and at the end of work.\nStore protective clothing separately.\nAvoid contact with the eyes.\nAvoid contact with the eyes and skin.\n· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.\n· Protection of hands:\nDue to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.\nProtective gloves\nThe glove material has to be impermeable and resistant to the product/ the substance/ the preparation.\nSelection of the glove material on consideration of the penetration times, rates of diffusion and the degradation\n· Material of gloves\nThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer\nto manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance\nand has therefore to be checked prior to the application.\n· Eye protection:\nTightly sealed goggles\n9 Physical and chemical properties\n· Information on basic physical and chemical properties\n· General Information\n· Appearance:\nForm:\nPowder\nColor:\nBlack\n· Odor:\nMild\n· Odor threshold:\nNot determined.\n· pH-value:\nNot applicable.\n· Change in condition\nMelting point/Melting range:\nUndetermined.\n(Contd. on page 6)\n\n\nPage 6\nPage 6/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Black Glass-Filled Epoxy Powder, Non-stick\n(Contd. of page 5)\n59.1.0\nBoiling point/Boiling range:\nUndetermined.\n· Flash point:\nNot applicable.\n· Flammability (solid, gaseous):\nNot determined.\n· Decomposition temperature:\nNot determined.\n· Ignition temperature:\nProduct is not selfigniting.\n· Danger of explosion:\nProduct does not present an explosion hazard.\n· Explosion limits:\nLower:\nNot determined.\nUpper:\nNot determined.\n· Vapor pressure:\nNot applicable.\n· Density at 20 °C (68 °F):\n1.6 g/cm³ (13.352 lbs/gal)\n· Relative density\nNot determined.\n· Vapor density\nNot applicable.\n· Evaporation rate\nNot applicable.\n· Solubility in / Miscibility with\nWater:\nInsoluble.\n· Partition coefficient (n-octanol/water): Not determined.\n· Viscosity:\nDynamic:\nNot applicable.\nKinematic:\nNot applicable.\n· Solvent content:\nOrganic solvents:\n0.0 %\nVOC content:\n0.01 %\nSolids content:\n98.6 %\n· Other information\nNo further relevant information available.\n10 Stability and reactivity\n· Reactivity No further relevant information available.\n· Chemical stability\n· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.\n· Possibility of hazardous reactions No dangerous reactions known.\n· Conditions to avoid\nKeep away from oxidising agents and acidic substances.\nDo not mix with alkalis.\n· Incompatible materials: No further relevant information available.\n· Hazardous decomposition products:\nAt elevated temperatures: phenol, formaldehyde, alkyl phenols and aromatic hydrocarbons may be generated.\nCarbon monoxide and carbon dioxide\n· Additional information: Hazardous decomposition products may form during combustion.\n11 Toxicological information\n· Information on toxicological effects\n· Acute toxicity:\n· LD/LC50 values that are relevant for classification:\nOral\nLD50 >5,000 mg/kg (rat)\nDermal LD50 >5,000 mg/kg (rabbit)\n \n(Contd. on page 7)\n\n\nPage 7\nPage 7/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Black Glass-Filled Epoxy Powder, Non-stick\n(Contd. of page 6)\n59.1.0\n117-08-8 tetrachlorophthalic anhydride\nOral\nLD50 15,800 mg/kg (rat)\nDermal LD50 >5,000 mg/kg (rabbit)\n557-05-1 zinc distearate, pure\nOral\nLD50 5,000 mg/kg (rat)\nDermal LD50 >2,000 mg/kg (rabbit)\n1333-86-4 Carbon black\nOral\nLD50 10,000 mg/kg (rat)\n111-90-0 Diethylene glycol monoethyl ether\nOral\nLD50 5,500 mg/kg (rat)\nDermal LD50 8,500 mg/kg (rabbit)\n· Primary chemical irritant effect:\n· on the skin: No irritant effect.\n· on the eye: Strong irritant with the danger of severe eye injury.\n· Sensitization:\nSensitization possible through inhalation.\nSensitization possible through skin contact.\n· Additional toxicological information:\n· Carcinogenic categories\n· IARC (International Agency for Research on Cancer)\n14808-60-7 Quartz (SiO2)\n1 \n1333-86-4 Carbon black\n2B\n118-74-1 hexachlorobenzene\n2B\n· NTP (National Toxicology Program)\n14808-60-7 Quartz (SiO2)\nK \n118-74-1 hexachlorobenzene\nR \n· OSHA-Ca (Occupational Safety & Health Administration)\nNone of the ingredients is listed.\n12 Ecological information\n· Toxicity\n· Aquatic toxicity:\n117-08-8 tetrachlorophthalic anhydride\nEC50 (48 h)\n104 mg/l (daphnia)\nLC50 (96 h)\n106 mg/l (oncorhynchus mykiss)\nErC50(72h) (static) 84 mg/l (pseudokirchneriella subcapitata)\n· Persistence and degradability No further relevant information available.\n· Behavior in environmental systems:\n· Bioaccumulative potential No further relevant information available.\n· Mobility in soil No further relevant information available.\n· Ecotoxical effects:\n· Remark: Toxic for fish\n· Additional ecological information:\n· General notes:\nDo not allow product to reach ground water, water course or sewage system, even in small quantities.\nMust not reach bodies of water or drainage ditch undiluted or unneutralized.\nDanger to drinking water if even extremely small quantities leak into the ground.\nAlso poisonous for fish and plankton in water bodies.\nToxic for aquatic organisms\n(Contd. on page 8)\n\n\nPage 8\nPage 8/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Black Glass-Filled Epoxy Powder, Non-stick\n(Contd. of page 7)\n59.1.0\n· Results of PBT and vPvB assessment\n· PBT: Not applicable.\n· vPvB: Not applicable.\n· Other adverse effects No further relevant information available.\n13 Disposal considerations\n· Waste treatment methods\n· Recommendation: Contact waste processors for recycling information.\n· Uncleaned packagings:\n· Recommendation: Disposal must be made according to official regulations.\n14 Transport information\n· UN-Number\n· DOT, ADN, IMDG, IATA\nnot regulated\n· UN proper shipping name\n· DOT, ADN, IMDG, IATA\nnot regulated\n· Transport hazard class(es)\n· DOT, ADN, IMDG, IATA\n· Class\nnot regulated\n· Packing group\n· DOT, IMDG, IATA\nnot regulated\n· Environmental hazards:\n· Marine pollutant:\nNo\n· Special precautions for user\nNot applicable.\n· Transport in bulk according to Annex II of MARPOL73/78 and\nthe IBC Code\nNot applicable.\n· UN "Model Regulation":\nnot regulated\n15 Regulatory information\n· Safety, health and environmental regulations/legislation specific for the substance or mixture\n· Sara\n· Section 355 (extremely hazardous substances):\nNone of the ingredients is listed.\n· Section 313 (Specific toxic chemical listings):\n557-05-1 zinc distearate, pure\n118-74-1 hexachlorobenzene\n111-90-0 Diethylene glycol monoethyl ether\n· TSCA (Toxic Substances Control Act):\nAll components have the value ACTIVE.\n· Hazardous Air Pollutants\n118-74-1 hexachlorobenzene\n· Proposition 65\n· Chemicals known to cause cancer:\n14808-60-7 Quartz (SiO2)\n1333-86-4 Carbon black\n118-74-1 hexachlorobenzene\n(Contd. on page 9)\n\n\nPage 9\nPage 9/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Black Glass-Filled Epoxy Powder, Non-stick\n(Contd. of page 8)\n59.1.0\n· Chemicals known to cause reproductive toxicity for females:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for males:\nNone of the ingredients is listed.\n· Chemicals known to cause developmental toxicity:\n118-74-1 hexachlorobenzene\n· National regulations:\n· Additional classification according to Decree on Hazardous Materials: Carcinogenic hazardous material group III (dangerous).\n· Information about limitation of use:\nWorkers are not allowed to be exposed to the hazardous carcinogenic materials contained in this preparation. Exceptions can be made by the\nauthorities in certain cases.\n· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.\n16 Other information\nTo the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties\nand does not establish a contractual legal relationship.\n· Department issuing SDS: Technical Services\n· Contact: Pablo Mendoza\n· Last revision / supersedes version: 06/01/2024 / 3.0\n· Supersedes date: 12/01/2022\n· Abbreviations and acronyms:\nADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by\nRoad)\nIMDG: International Maritime Code for Dangerous Goods\nDOT: US Department of Transportation\nIATA: International Air Transport Association\nEINECS: European Inventory of Existing Commercial Chemical Substances\nELINCS: European List of Notified Chemical Substances\nCAS: Chemical Abstracts Service (division of the American Chemical Society)\nVOC: Volatile Organic Compounds (USA, EU)\nLC50: Lethal concentration, 50 percent\nLD50: Lethal dose, 50 percent\nPBT: Persistent, Bioaccumulative and Toxic\nvPvB: very Persistent and very Bioaccumulative\nOSHA: Occupational Safety & Health\nTLV: Threshold Limit Value\nPEL: Permissible Exposure Limit\nREL: Recommended Exposure Limit\nFlammable Liquids 4: Flammable liquids – Category 4\nSelf-heating substances and mixtures 2: Self-heating substances and mixtures – Category 2\nEye Damage 1: Serious eye damage/eye irritation – Category 1\nEye Irritation 2A: Serious eye damage/eye irritation – Category 2A\nSensitization - Respiratory 1: Respiratory sensitisation – Category 1\nSensitization - Skin 1: Skin sensitisation – Category 1\nCarcinogenicity 1A: Carcinogenicity – Category 1A\nCarcinogenicity 2: Carcinogenicity – Category 2\nSpecific Target Organ Toxicity - Single Exposure 3: Specific target organ toxicity (single exposure) – Category 3\nSpecific Target Organ Toxicity - Repeated Exposure 1: Specific target organ toxicity (repeated exposure) – Category 1\nAquatic Acute 1: Hazardous to the aquatic environment - acute aquatic hazard – Category 1\nAquatic Acute 2: Hazardous to the aquatic environment - acute aquatic hazard – Category 2\nAquatic Chronic 1: Hazardous to the aquatic environment - long-term aquatic hazard – Category 1\nAquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard – Category 2\n· * Data compared to the previous version altered. \n