COPPER-BASED SAFETY DATA SHEET
Also listed as: Conductive Mounting Powder - Copper Based
Refer to the original PDF for tables, figures and page layout.
Page 1\n \nPage 1/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\n59.1.0\n* 1 Identification\n· Product name: Conductive Mounting Powder, Copper-based\n· Part number: 155-10010\n· Application of the substance / the mixture Thermoset molding\n· Details of the supplier of the safety data sheet\n· Manufacturer/Supplier:\nAllied High Tech Products Inc.\n16207 Carmenita Road\nUSA-Cerritos, CA, 90703\nUSA\ninfo@alliedhightech.com\n· Information department: Product safety department\n· Emergency telephone number:\nDuring normal opening times: +1 (310) 635-2466\nChemtrec: +1 (202) 483-7616\n2 Hazard(s) identification\n· Classification of the substance or mixture\nGHS09 Environment\nAquatic Chronic 2 H411 Toxic to aquatic life with long lasting effects.\nCombustible Dust \nMay form combustible dust concentrations in air.\n· Label elements\n· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).\n· Hazard pictograms\nGHS09\n· Signal word Warning\n· Hazard statements\nToxic to aquatic life with long lasting effects.\nMay form combustible dust concentrations in air.\n· Precautionary statements\nAvoid release to the environment.\nCollect spillage.\nDispose of contents/container in accordance with local/regional/national/international regulations.\n(Contd. on page 2)\n\n\nPage 2\nPage 2/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: Conductive Mounting Powder, Copper-based\n(Contd. of page 1)\n59.1.0\n* 3 Composition/information on ingredients\n· Chemical characterization: Mixtures\n· Description: Mixture of the substances listed below with nonhazardous additions.\n· Hazardous components and components with occupational exposure limits:\n7440-50-8 copper\n Aquatic Chronic 2, H411\n50-80%\n· Non-hazardous components:\nParticulates, NOC\n20-50%\n· Additional information: The specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.\n4 First-aid measures\n· Description of first aid measures\n· After inhalation: Supply fresh air; consult doctor in case of complaints.\n· After skin contact: Generally the product does not irritate the skin.\n· After eye contact: Rinse opened eye for several minutes under running water.\n· After swallowing: If symptoms persist consult doctor.\n· Information for doctor:\n· Most important symptoms and effects, both acute and delayed Eye irritation\n· Indication of any immediate medical attention and special treatment needed No further relevant information available.\n5 Fire-fighting measures\n· Extinguishing media\n· Suitable extinguishing agents:\nAlcohol resistant foam\nCarbon dioxide\nFire-extinguishing powder\nWater spray\nUse fire fighting measures that suit the environment.\n· Special hazards arising from the substance or mixture\nAt temperatures above 250°C, the following can be emitted:\nCarbon monoxide (CO)\nHydrogen cyanide (HCN)\n· Advice for firefighters\n· Protective equipment: No special measures required.\n6 Accidental release measures\n· Personal precautions, protective equipment and emergency procedures Not required.\n· Environmental precautions:\nDo not allow to enter sewers/ surface or ground water.\nInform respective authorities in case of seepage into water course or sewage system.\n· Methods and material for containment and cleaning up:\nPick up mechanically.\nDispose contaminated material as waste according to section 13.\n· Reference to other sections\nSee Section 7 for information on safe handling.\nSee Section 8 for information on personal protection equipment.\nSee Section 13 for disposal information.\n7 Handling and storage\n· Handling:\n· Precautions for safe handling No special precautions are necessary if used correctly.\n· Information about protection against explosions and fires:\nDust generated from the substrate during use of this product may be explosive if in sufficient concentration with an ignition source.\n(Contd. on page 3)\n\n\nPage 3\nPage 3/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: Conductive Mounting Powder, Copper-based\n(Contd. of page 2)\n59.1.0\n· Conditions for safe storage, including any incompatibilities\n· Storage:\n· Requirements to be met by storerooms and receptacles:\nStore in a cool location.\nNo special requirements.\n· Information about storage in one common storage facility: Not required.\n· Further information about storage conditions: None.\n· Specific end use(s) No further relevant information available.\n8 Exposure controls/personal protection\n· Additional information about design of technical systems: No additional data. See 7.\n· Control parameters\n· Components with limit values that require monitoring at the workplace:\n7440-50-8 copper\nPEL Long-term value: 1* 0.1** mg/m³\nas Cu *dusts and mists **fume\nREL Long-term value: 1* 0.1** mg/m³\nas Cu *dusts and mists **fume\nTLV Long-term value: 1* 0.2** mg/m³\n*dusts and mists; **fume; as Cu\n· Exposure controls\n· Personal protective equipment:\n· General protective and hygienic measures: Wash hands before breaks and at the end of work.\n· Breathing equipment:\nIn case of dust formation, use respiratory equipment with filter type:\nFilter P1\n· Protection of hands: Not required.\n· Material of gloves Nitrile rubber, NBR\n· Eye protection: Not required.\n9 Physical and chemical properties\n· Information on basic physical and chemical properties\n· General Information\n· Appearance:\nForm:\nPowder\nColor:\nDark orange color\n· Odor:\nOdorless\n· Odor threshold:\nNot determined.\n· pH-value:\nNot applicable.\n· Change in condition\nMelting point/Melting range:\n90-130 °C (194-266 °F)\nBoiling point/Boiling range:\nUndetermined.\n· Flash point:\n>250 °C (>482 °F)\n· Flammability (solid, gaseous):\nNot determined.\n· Auto igniting:\n>400 °C (>752 °F)\n· Decomposition temperature:\nNot determined.\n· Ignition temperature:\nProduct is not selfigniting.\n· Danger of explosion:\nProduct does not present an explosion hazard.\n(Contd. on page 4)\n\n\nPage 4\nPage 4/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: Conductive Mounting Powder, Copper-based\n(Contd. of page 3)\n59.1.0\n· Explosion limits:\nLower:\nNot determined.\nUpper:\nNot determined.\n· Vapor pressure:\nNot applicable.\n· Density at 20 °C (68 °F):\n8-9 g/cm³ (66.76-75.105 lbs/gal)\n· Relative density\nNot determined.\n· Vapor density\nNot applicable.\n· Evaporation rate\nNot applicable.\n· Solubility in / Miscibility with\nWater:\nInsoluble.\n· Partition coefficient (n-octanol/water): Not determined.\n· Viscosity:\nDynamic:\nNot applicable.\nKinematic:\nNot applicable.\n· Solvent content:\nVOC content:\n0.00 %\nSolids content:\n100.0 %\n· Other information\nNo further relevant information available.\n10 Stability and reactivity\n· Reactivity No further relevant information available.\n· Chemical stability\n· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.\n· Possibility of hazardous reactions\nAs the product is supplied it is not capable of dust explosion; however enrichment with fine dust causes risk of dust explosion.\n· Conditions to avoid\nAvoid creating dust as it may form an explosive mixture in the air.\nKeep away from oxidising agents and acidic substances.\n· Incompatible materials: No further relevant information available.\n· Hazardous decomposition products:\nHydrogen cyanide (prussic acid)\nStyrene\nHydrocarbons\nAldehyde\nAcids\nPhenolic compounds\nCarbon monoxide and carbon dioxide\nAt temperatures above 250°C, depolymerization and the release of starting monomers can arise.\n· Additional information: Hazardous decomposition products may form during combustion.\n11 Toxicological information\n· Information on toxicological effects\n· Acute toxicity:\n· Primary chemical irritant effect:\n· on the skin: No irritant effect.\n· on the eye: No irritating effect.\n· Sensitization: No sensitizing effects known.\n· Additional toxicological information: Abrasive eye irritant\n(Contd. on page 5)\n\n\nPage 5\nPage 5/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: Conductive Mounting Powder, Copper-based\n(Contd. of page 4)\n59.1.0\n· Carcinogenic categories\n· IARC (International Agency for Research on Cancer)\nNone of the ingredients is listed.\n· NTP (National Toxicology Program)\nNone of the ingredients is listed.\n· OSHA-Ca (Occupational Safety & Health Administration)\nNone of the ingredients is listed.\n12 Ecological information\n· Toxicity\n· Aquatic toxicity: No further relevant information available.\n· Persistence and degradability No further relevant information available.\n· Behavior in environmental systems:\n· Bioaccumulative potential No further relevant information available.\n· Mobility in soil No further relevant information available.\n· Ecotoxical effects:\n· Remark: Toxic for fish\n· Additional ecological information:\n· General notes:\nWater hazard class 2 (Self-assessment): hazardous for water\nDo not allow product to reach ground water, water course or sewage system.\nDanger to drinking water if even small quantities leak into the ground.\nAlso poisonous for fish and plankton in water bodies.\nToxic for aquatic organisms\n· Results of PBT and vPvB assessment\n· PBT: Not applicable.\n· vPvB: Not applicable.\n· Other adverse effects No further relevant information available.\n13 Disposal considerations\n· Waste treatment methods\n· Recommendation: Contact waste processors for recycling information.\n· Uncleaned packagings:\n· Recommendation: Disposal must be made according to official regulations.\n14 Transport information\n· UN-Number\n· DOT\nnot regulated\n· IMDG, IATA\nUN3077\n· UN proper shipping name\n· DOT\nnot regulated\n· IMDG\nENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID,\nN.O.S. (copper), MARINE POLLUTANT\n· IATA\nENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID,\nN.O.S. (copper)\n(Contd. on page 6)\n\n\nPage 6\nPage 6/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: Conductive Mounting Powder, Copper-based\n(Contd. of page 5)\n59.1.0\n· Transport hazard class(es)\n· DOT\n· Class\nnot regulated\n· IMDG, IATA\n· Class\n9 Miscellaneous dangerous substances and articles\n· Label\n9 \n· Packing group\n· DOT\nnot regulated\n· IMDG, IATA\nIII\n· Environmental hazards:\n· Marine pollutant:\nNo\nSymbol (fish and tree)\n· Special marking (IATA):\nSymbol (fish and tree)\n· Special precautions for user\nWarning: Miscellaneous dangerous substances and articles\n· Hazard identification number (Kemler code):\n90\n· EMS Number:\nF-A,S-F\n· Stowage Category\nA \n· Stowage Code\nSW23 When transported in BK3 bulk container, see 7.6.2.12 and\n7.7.3.9.\n· Transport in bulk according to Annex II of MARPOL73/78 and\nthe IBC Code\nNot applicable.\n· Transport/Additional information:\n· DOT\n· Limited quantities (LQ)\n5 kg\n· Transport category\n3 \n· Tunnel restriction code\n(-)\n· IMDG\n· Limited quantities (LQ)\n5 kg\n· Excepted quantities (EQ)\nCode: E1\nMaximum net quantity per inner packaging: 30 g\nMaximum net quantity per outer packaging: 1000 g\n· UN "Model Regulation":\nUN 3077 ENVIRONMENTALLY HAZARDOUS SUBSTANCE,\nSOLID, N.O.S. (COPPER), 9, III\n15 Regulatory information\n· Safety, health and environmental regulations/legislation specific for the substance or mixture\n· Sara\n· Section 355 (extremely hazardous substances):\nNone of the ingredients is listed.\n· Section 313 (Specific toxic chemical listings):\n7440-50-8 copper\n· TSCA (Toxic Substances Control Act):\nAll other ingredients are exempt from listing.\n7440-50-8 copper\nACTIVE\n(Contd. on page 7)\n\n\nPage 7\nPage 7/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: Conductive Mounting Powder, Copper-based\n(Contd. of page 6)\n59.1.0\n· Hazardous Air Pollutants\nNone of the ingredients is listed.\n· Proposition 65\n· Chemicals known to cause cancer:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for females:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for males:\nNone of the ingredients is listed.\n· Chemicals known to cause developmental toxicity:\nNone of the ingredients is listed.\n· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.\n16 Other information\nTo the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties\nand does not establish a contractual legal relationship.\n· Department issuing SDS: Technical Services\n· Contact: Pablo Mendoza\n· Last revision / supersedes version: 06/01/2024 / 4.0\n· Supersedes date: 12/02/2022\n· Abbreviations and acronyms:\nADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by\nRoad)\nIMDG: International Maritime Code for Dangerous Goods\nDOT: US Department of Transportation\nIATA: International Air Transport Association\nEINECS: European Inventory of Existing Commercial Chemical Substances\nELINCS: European List of Notified Chemical Substances\nCAS: Chemical Abstracts Service (division of the American Chemical Society)\nVOC: Volatile Organic Compounds (USA, EU)\nPBT: Persistent, Bioaccumulative and Toxic\nvPvB: very Persistent and very Bioaccumulative\nOSHA: Occupational Safety & Health\nTLV: Threshold Limit Value\nPEL: Permissible Exposure Limit\nREL: Recommended Exposure Limit\nAquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard – Category 2\n· * Data compared to the previous version altered. \n