EpoxyBond 14 Part A and B
Refer to the original PDF for tables, figures and page layout.
Page 1\n \nPage 1/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\n53.0.5\n1 Identification\n· Product name: EpoxyBond 14 - Part A\n· Part number: 71-10025\n· Application of the substance / the mixture Adhesives\n· Details of the supplier of the safety data sheet\n· Manufacturer/Supplier:\nAllied High Tech Products Inc.\n2376 East Pacifica Place\nUSA-RANCHO DOMINGUEZ, CA 90220\nUSA\ninfo@alliedhightech.com\n· Information department: Product safety department\n· Emergency telephone number:\nDuring normal opening times: +1 (310) 635-2466\nChemtrec: +1 (202) 483-7616\n2 Hazard(s) identification\n· Classification of the substance or mixture\nGHS05 Corrosion\nEye Dam. 1\nH318 Causes serious eye damage.\nGHS09 Environment\nAquatic Chronic 2 H411 Toxic to aquatic life with long lasting effects.\nGHS07\nAcute Tox. 4\nH302 Harmful if swallowed.\nAcute Tox. 4\nH312 Harmful in contact with skin.\nAcute Tox. 4\nH332 Harmful if inhaled.\nSkin Irrit. 2\nH315 Causes skin irritation.\nSkin Sens. 1\nH317 May cause an allergic skin reaction.\n· Label elements\n· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).\n(Contd. on page 2)\n\n\nPage 2\nPage 2/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part A\n(Contd. of page 1)\n53.0.5\n· Hazard pictograms\nGHS05\nGHS07\nGHS09\n· Signal word Danger\n· Hazard-determining components of labeling:\nReactive Diluent\n1-Chloro-4 Trifluromethyl Bisphenol A Epoxy Resin\n· Hazard statements\nHarmful if swallowed, in contact with skin or if inhaled.\nCauses skin irritation.\nCauses serious eye damage.\nMay cause an allergic skin reaction.\nToxic to aquatic life with long lasting effects.\n· Precautionary statements\nAvoid breathing dust/fume/gas/mist/vapors/spray\nWash thoroughly after handling.\nDo not eat, drink or smoke when using this product.\nUse only outdoors or in a well-ventilated area.\nContaminated work clothing must not be allowed out of the workplace.\nAvoid release to the environment.\nWear protective gloves/protective clothing/eye protection/face protection.\nIf swallowed: Call a poison center/doctor if you feel unwell.\nIf on skin: Wash with plenty of water.\nIF INHALED: Remove person to fresh air and keep comfortable for breathing.\nIf in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.\nImmediately call a poison center/doctor.\nSpecific treatment (see on this label).\nRinse mouth.\nTake off contaminated clothing and wash it before reuse.\nIf skin irritation or rash occurs: Get medical advice/attention.\nWash contaminated clothing before reuse.\nCollect spillage.\nDispose of contents/container in accordance with local/regional/national/international regulations.\n3 Composition/information on ingredients\n· Chemical characterization: Mixtures\n· Description: Mixture of the substances listed below with nonhazardous additions.\n· Hazardous components and components with occupational exposure limits:\n25085-99-8 1-Chloro-4 Trifluromethyl Bisphenol A Epoxy Resin\n Aquatic Chronic 2, H411;\n Skin Irrit. 2, H315; Eye Irrit. 2A, H319; Skin Sens. 1, H317\n50-100%\nReactive Diluent\n Eye Dam. 1, H318;\n Acute Tox. 4, H302; Acute Tox. 4, H312; Acute Tox. 4, H332; Skin Irrit. 2, H315; Skin\nSens. 1, H317\n25-50%\n· Additional information: The specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.\n4 First-aid measures\n· Description of first aid measures\n· General information:\nImmediately remove any clothing soiled by the product.\nSymptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.\n(Contd. on page 3)\n\n\nPage 3\nPage 3/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part A\n(Contd. of page 2)\n53.0.5\n· After inhalation:\nSupply fresh air and to be sure call for a doctor.\nIn case of unconsciousness place patient stably in side position for transportation.\n· After skin contact: Immediately wash with water and soap and rinse thoroughly.\n· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.\n· After swallowing: Immediately call a doctor.\n· Information for doctor:\n· Most important symptoms and effects, both acute and delayed\nDizziness\nHeadache\nNausea\nBreathing difficulty\nCoughing\nAllergic reactions\nDermatitis\nEye irritation\n· Indication of any immediate medical attention and special treatment needed No further relevant information available.\n5 Fire-fighting measures\n· Extinguishing media\n· Suitable extinguishing agents:\nWater spray\nFoam\nUse fire fighting measures that suit the environment.\n· Special hazards arising from the substance or mixture No further relevant information available.\n· Advice for firefighters\n· Protective equipment: Mouth respiratory protective device.\n6 Accidental release measures\n· Personal precautions, protective equipment and emergency procedures Wear protective equipment. Keep unprotected persons away.\n· Environmental precautions: Inform respective authorities in case of seepage into water course or sewage system.\n· Methods and material for containment and cleaning up:\nAbsorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).\nUse neutralizing agent.\nDispose contaminated material as waste according to item 13.\nEnsure adequate ventilation.\n· Reference to other sections\nSee Section 7 for information on safe handling.\nSee Section 8 for information on personal protection equipment.\nSee Section 13 for disposal information.\n7 Handling and storage\n· Handling:\n· Precautions for safe handling\nEnsure good ventilation/exhaustion at the workplace.\nPrevent formation of aerosols.\n· Information about protection against explosions and fires: No special measures required.\n· Conditions for safe storage, including any incompatibilities\n· Storage:\n· Requirements to be met by storerooms and receptacles: Store at room temperature.\n· Information about storage in one common storage facility: Not required.\n· Further information about storage conditions:\nKeep receptacle tightly sealed.\nStore receptacle in a well ventilated area.\n· Specific end use(s) No further relevant information available.\n(Contd. on page 4)\n\n\nPage 4\nPage 4/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part A\n(Contd. of page 3)\n53.0.5\n8 Exposure controls/personal protection\n· Additional information about design of technical systems: No further data; see item 7.\n· Control parameters\n· Components with limit values that require monitoring at the workplace:\nThe product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.\n· Exposure controls\n· Personal protective equipment:\n· General protective and hygienic measures:\nKeep away from foodstuffs, beverages and feed.\nImmediately remove all soiled and contaminated clothing.\nWash hands before breaks and at the end of work.\nAvoid contact with the skin.\nAvoid contact with the eyes and skin.\n· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.\n· Protection of hands:\nProtective gloves\nThe glove material has to be impermeable and resistant to the product/ the substance/ the preparation.\nSelection of the glove material on consideration of the penetration times, rates of diffusion and the degradation\n· Material of gloves\nNitrile rubber, NBR\nNeoprene gloves\nButyl rubber, BR\nThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer\nto manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance\nand has therefore to be checked prior to the application.\n· Eye protection:\nTightly sealed goggles\n9 Physical and chemical properties\n· Information on basic physical and chemical properties\n· General Information\n· Appearance:\nForm:\nLiquid\nColor:\nColorless\n· Odor:\nLight\n· Odor threshold:\nNot determined.\n· pH-value:\nNot determined.\n· Change in condition\nMelting point/Melting range:\nUndetermined.\nBoiling point/Boiling range:\nUndetermined.\n· Flash point:\n>110 °C (>230 °F)\n· Flammability (solid, gaseous):\nNot applicable.\n· Decomposition temperature:\nNot determined.\n(Contd. on page 5)\n\n\nPage 5\nPage 5/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part A\n(Contd. of page 4)\n53.0.5\n· Auto igniting:\nProduct is not selfigniting.\n· Danger of explosion:\nProduct does not present an explosion hazard.\n· Explosion limits:\nLower:\nNot determined.\nUpper:\nNot determined.\n· Vapor pressure:\nNot determined.\n· Density:\nNot determined.\n· Relative density\nNot determined.\n· Vapor density\nNot determined.\n· Evaporation rate\n<BuAc\n· Solubility in / Miscibility with\nWater:\nNot miscible or difficult to mix.\n· Partition coefficient (n-octanol/water): Not determined.\n· Viscosity:\nDynamic:\nNot determined.\nKinematic:\nNot determined.\n· Solvent content:\nVOC content:\n0.00 %\nSolids content:\n0.0 %\n· Other information\nNo further relevant information available.\n10 Stability and reactivity\n· Reactivity No further relevant information available.\n· Chemical stability\n· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.\n· Possibility of hazardous reactions No dangerous reactions known.\n· Conditions to avoid\nKeep away from oxidising agents and acidic substances.\nKeep away from alkaline solutions.\nKeep away from heat.\n· Incompatible materials: No further relevant information available.\n· Hazardous decomposition products: Carbon monoxide and carbon dioxide\n· Additional information: Hazardous decomposition products may form during combustion.\n11 Toxicological information\n· Information on toxicological effects\n· Acute toxicity:\n· LD/LC50 values that are relevant for classification:\nOral\nLD50\n1,666.67 mg/kg (ATE)\nDermal\nLD50\n1,100 mg/kg (ATE)\nInhalative LC50/4 h >19 mg/l (ATE)\n 25085-99-8 1-Chloro-4 Trifluromethyl Bisphenol A Epoxy Resin\nOral\nLD50\n15,000 mg/kg (rat)\nDermal\nLD50\n23,000 mg/kg (rabbit)\nReactive Diluent\nOral\nLD50\n1,163 mg/kg (rat)\n(Contd. on page 6)\n\n\nPage 6\nPage 6/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part A\n(Contd. of page 5)\n53.0.5\nDermal\nLD50\n1,130 mg/kg (rabbit)\nInhalative LC50/4 h 11 mg/l (ATE)\n· Primary chemical irritant effect:\n· on the skin: Irritant to skin and mucous membranes.\n· on the eye: Strong irritant with the danger of severe eye injury.\n· Sensitization: Sensitization possible through skin contact.\n· Additional toxicological information:\n· Carcinogenic categories\n· IARC (International Agency for Research on Cancer)\nNone of the ingredients is listed.\n· NTP (National Toxicology Program)\nNone of the ingredients is listed.\n· OSHA-Ca (Occupational Safety & Health Administration)\nNone of the ingredients is listed.\n12 Ecological information\n· Toxicity\n· Aquatic toxicity: No further relevant information available.\n· Persistence and degradability No further relevant information available.\n· Behavior in environmental systems:\n· Bioaccumulative potential No further relevant information available.\n· Mobility in soil No further relevant information available.\n· Ecotoxical effects:\n· Remark: Toxic for fish\n· Additional ecological information:\n· General notes:\nWater hazard class 2 (Self-assessment): hazardous for water\nDo not allow product to reach ground water, water course or sewage system.\nMust not reach bodies of water or drainage ditch undiluted or unneutralized.\nDanger to drinking water if even small quantities leak into the ground.\nAlso poisonous for fish and plankton in water bodies.\nToxic for aquatic organisms\n· Results of PBT and vPvB assessment\n· PBT: Not applicable.\n· vPvB: Not applicable.\n· Other adverse effects No further relevant information available.\n13 Disposal considerations\n· Waste treatment methods\n· Recommendation: Contact waste processors for recycling information.\n· Uncleaned packagings:\n· Recommendation: Disposal must be made according to official regulations.\n14 Transport information\n· UN-Number\n· DOT\nnot regulated\n· IMDG, IATA\nUN3082\n· UN proper shipping name\n· DOT\nnot regulated\n(Contd. on page 7)\n\n\nPage 7\nPage 7/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part A\n(Contd. of page 6)\n53.0.5\n· IMDG\nENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,\nN.O.S. (1-Chloro-4 Trifluromethyl Bisphenol A Epoxy Resin),\nMARINE POLLUTANT\n· IATA\nENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,\nN.O.S. (1-Chloro-4 Trifluromethyl Bisphenol A Epoxy Resin)\n· Transport hazard class(es)\n· DOT\n· Class\nnot regulated\n· IMDG, IATA\n· Class\n9 Miscellaneous dangerous substances and articles\n· Label\n9 \n· Packing group\n· DOT\nnot regulated\n· IMDG, IATA\nIII\n· Environmental hazards:\n· Marine pollutant:\nSymbol (fish and tree)\n· Special marking (IATA):\nSymbol (fish and tree)\n· Special precautions for user\nWarning: Miscellaneous dangerous substances and articles\n· Hazard identification number (Kemler code):\n90\n· EMS Number:\nF-A,S-F\n· Stowage Category\nA \n· Transport in bulk according to Annex II of MARPOL73/78 and\nthe IBC Code\nNot applicable.\n· Transport/Additional information:\n· DOT\n· Limited quantities (LQ)\n5L\n· Transport category\n3 \n· Tunnel restriction code\n- \n· IMDG\n· Limited quantities (LQ)\n5L\n· Excepted quantities (EQ)\nCode: E1\nMaximum net quantity per inner packaging: 30 ml\nMaximum net quantity per outer packaging: 1000 ml\n· UN "Model Regulation":\nUN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE,\nLIQUID, N.O.S. (1-CHLORO-4 TRIFLUROMETHYL BISPHENOL\nA EPOXY RESIN), 9, III\n15 Regulatory information\n· Safety, health and environmental regulations/legislation specific for the substance or mixture\nNo further relevant information available.\n· Sara\n· Section 355 (extremely hazardous substances):\nNone of the ingredients is listed.\n(Contd. on page 8)\n\n\nPage 8\nPage 8/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part A\n(Contd. of page 7)\n53.0.5\n· Section 313 (Specific toxic chemical listings):\nNone of the ingredients is listed.\n· TSCA (Toxic Substances Control Act):\nAll components have the value ACTIVE.\n· Hazardous Air Pollutants\nNone of the ingredients is listed.\n· Proposition 65\n· Chemicals known to cause cancer:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for females:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for males:\nNone of the ingredients is listed.\n· Chemicals known to cause developmental toxicity:\nNone of the ingredients is listed.\n· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.\n16 Other information\nThis information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and\nshall not establish a legally valid contractual relationship.\n· Department issuing SDS: Environment protection department.\n· Contact: Kim Dermit\n· Last revision / supersedes version: 05/21/2021 / -\n· Abbreviations and acronyms:\nIMDG: International Maritime Code for Dangerous Goods\nDOT: US Department of Transportation\nIATA: International Air Transport Association\nEINECS: European Inventory of Existing Commercial Chemical Substances\nELINCS: European List of Notified Chemical Substances\nCAS: Chemical Abstracts Service (division of the American Chemical Society)\nVOC: Volatile Organic Compounds (USA, EU)\nLC50: Lethal concentration, 50 percent\nLD50: Lethal dose, 50 percent\nPBT: Persistent, Bioaccumulative and Toxic\nvPvB: very Persistent and very Bioaccumulative\nOSHA: Occupational Safety & Health\nTLV: Threshold Limit Value\nPEL: Permissible Exposure Limit\nREL: Recommended Exposure Limit\nAcute Tox. 4: Acute toxicity – Category 4\nSkin Irrit. 2: Skin corrosion/irritation – Category 2\nEye Dam. 1: Serious eye damage/eye irritation – Category 1\nEye Irrit. 2A: Serious eye damage/eye irritation – Category 2A\nSkin Sens. 1: Skin sensitisation – Category 1\nAquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard – Category 2\n\n\nPage 9\n \nPage 1/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\n53.0.5\n1 Identification\n· Product name: EpoxyBond 14 - Part B\n· Part number: 71-10025\n· CAS Number:\n25513-64-8\n· Application of the substance / the mixture Adhesives\n· Details of the supplier of the safety data sheet\n· Manufacturer/Supplier:\nAllied High Tech Products Inc.\n2376 East Pacifica Place\nUSA-RANCHO DOMINGUEZ, CA 90220\nUSA\ninfo@alliedhightech.com\n· Information department: Product safety department\n· Emergency telephone number:\nDuring normal opening times: +1 (310) 635-2466\nChemtrec: +1 (202) 483-7616\n2 Hazard(s) identification\n· Classification of the substance or mixture\nGHS05 Corrosion\nSkin Corr. 1B\nH314 Causes severe skin burns and eye damage.\nEye Dam. 1\nH318 Causes serious eye damage.\nGHS07\nAcute Tox. 4\nH302 Harmful if swallowed.\nSkin Sens. 1\nH317 May cause an allergic skin reaction.\nAquatic Chronic 3 H412 Harmful to aquatic life with long lasting effects.\n· Label elements\n· GHS label elements The substance is classified and labeled according to the Globally Harmonized System (GHS).\n· Hazard pictograms\nGHS05\nGHS07\n(Contd. on page 2)\n\n\nPage 10\nPage 2/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part B\n(Contd. of page 1)\n53.0.5\n· Signal word Danger\n· Hazard statements\nHarmful if swallowed.\nCauses severe skin burns and eye damage.\nMay cause an allergic skin reaction.\nHarmful to aquatic life with long lasting effects.\n· Precautionary statements\nDo not breathe dusts or mists.\nWash thoroughly after handling.\nDo not eat, drink or smoke when using this product.\nContaminated work clothing must not be allowed out of the workplace.\nAvoid release to the environment.\nWear protective gloves/protective clothing/eye protection/face protection.\nIf swallowed: Call a poison center/doctor if you feel unwell.\nIf swallowed: Rinse mouth. Do NOT induce vomiting.\nIf on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.\nIF INHALED: Remove person to fresh air and keep comfortable for breathing.\nIf in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.\nImmediately call a poison center/doctor.\nSpecific treatment (see on this label).\nIf skin irritation or rash occurs: Get medical advice/attention.\nWash contaminated clothing before reuse.\nStore locked up.\nDispose of contents/container in accordance with local/regional/national/international regulations.\n3 Composition/information on ingredients\n· Chemical characterization: Substances\n· CAS No. Description\n25513-64-8 3,3,5-trimethylhexamethylene-diamine\n4 First-aid measures\n· Description of first aid measures\n· General information:\nImmediately remove any clothing soiled by the product.\nSymptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.\n· After inhalation:\nSupply fresh air and to be sure call for a doctor.\nIn case of unconsciousness place patient stably in side position for transportation.\n· After skin contact: Immediately wash with water and soap and rinse thoroughly.\n· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.\n· After swallowing:\nImmediately call a doctor.\nDrink copious amounts of water and provide fresh air. Immediately call a doctor.\n· Information for doctor:\n· Most important symptoms and effects, both acute and delayed\nThermal burns\nBreathing difficulty\nCoughing\nAllergic reactions\nDermatitis\nEye irritation\n· Indication of any immediate medical attention and special treatment needed No further relevant information available.\n(Contd. on page 3)\n\n\nPage 11\nPage 3/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part B\n(Contd. of page 2)\n53.0.5\n5 Fire-fighting measures\n· Extinguishing media\n· Suitable extinguishing agents:\nFoam\nWater spray\nUse fire fighting measures that suit the environment.\n· Special hazards arising from the substance or mixture During heating or in case of fire poisonous gases are produced.\n· Advice for firefighters\n· Protective equipment: Wear fully protective suit.\n6 Accidental release measures\n· Personal precautions, protective equipment and emergency procedures\nWear protective equipment. Keep unprotected persons away.\nKeep away from ignition sources\n· Environmental precautions:\nDo not allow product to reach sewage system or any water course.\nInform respective authorities in case of seepage into water course or sewage system.\n· Methods and material for containment and cleaning up:\nAbsorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).\nUse neutralizing agent.\nDispose contaminated material as waste according to item 13.\nEnsure adequate ventilation.\n· Reference to other sections\nSee Section 7 for information on safe handling.\nSee Section 8 for information on personal protection equipment.\nSee Section 13 for disposal information.\n7 Handling and storage\n· Handling:\n· Precautions for safe handling\nEnsure good ventilation/exhaustion at the workplace.\nPrevent formation of aerosols.\n· Information about protection against explosions and fires: No special measures required.\n· Conditions for safe storage, including any incompatibilities\n· Storage:\n· Requirements to be met by storerooms and receptacles: Store at room temperature.\n· Information about storage in one common storage facility: Not required.\n· Further information about storage conditions:\nKeep receptacle tightly sealed.\nStore receptacle in a well ventilated area.\n· Specific end use(s) No further relevant information available.\n8 Exposure controls/personal protection\n· Additional information about design of technical systems: No further data; see item 7.\n· Control parameters\n· Components with limit values that require monitoring at the workplace: Not required.\n· Exposure controls\n· Personal protective equipment:\n· General protective and hygienic measures:\nKeep away from foodstuffs, beverages and feed.\nImmediately remove all soiled and contaminated clothing.\nWash hands before breaks and at the end of work.\nAvoid contact with the eyes.\n(Contd. on page 4)\n\n\nPage 12\nPage 4/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part B\n(Contd. of page 3)\n53.0.5\nAvoid contact with the eyes and skin.\n· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.\n· Protection of hands:\nProtective gloves\nThe glove material has to be impermeable and resistant to the product/ the substance/ the preparation.\nSelection of the glove material on consideration of the penetration times, rates of diffusion and the degradation\n· Material of gloves\nButyl rubber, BR\nNitrile rubber, NBR\nNeoprene gloves\nThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer\nto manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance\nand has therefore to be checked prior to the application.\n· Eye protection:\nTightly sealed goggles\n9 Physical and chemical properties\n· Information on basic physical and chemical properties\n· General Information\n· Appearance:\nForm:\nLiquid\nColor:\nClear\n· Odor:\nAmine-like\n· Odor threshold:\nNot determined.\n· pH-value:\nNot determined.\n· Change in condition\nMelting point/Melting range:\nUndetermined.\nBoiling point/Boiling range:\nUndetermined.\n· Flash point:\n>104 °C (>219.2 °F)\n· Flammability (solid, gaseous):\nNot applicable.\n· Decomposition temperature:\nNot determined.\n· Auto igniting:\nNot determined.\n· Danger of explosion:\nProduct does not present an explosion hazard.\n· Explosion limits:\nLower:\nNot determined.\nUpper:\nNot determined.\n· Vapor pressure:\nNot determined.\n· Density:\nNot determined.\n· Relative density\nNot determined.\n· Vapor density\nNot determined.\n· Evaporation rate\n<BuAc\n· Solubility in / Miscibility with\nWater:\nFully miscible.\n(Contd. on page 5)\n\n\nPage 13\nPage 5/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part B\n(Contd. of page 4)\n53.0.5\n· Partition coefficient (n-octanol/water): Not determined.\n· Viscosity:\nDynamic:\nNot determined.\nKinematic:\nNot determined.\nVOC content:\n0.00 %\nSolids content:\n0.0 %\n· Other information\nNo further relevant information available.\n10 Stability and reactivity\n· Reactivity No further relevant information available.\n· Chemical stability\n· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.\n· Possibility of hazardous reactions No dangerous reactions known.\n· Conditions to avoid\nKeep away from heat.\nKeep away from alkaline solutions.\nKeep away from oxidising agents and acidic substances.\n· Incompatible materials: No further relevant information available.\n· Hazardous decomposition products:\nCarbon monoxide and carbon dioxide\nAmmonia\n· Additional information: Hazardous decomposition products may form during combustion.\n11 Toxicological information\n· Information on toxicological effects\n· Acute toxicity:\n· LD/LC50 values that are relevant for classification:\nOral LD50 500 mg/kg (ATE)\n· Primary chemical irritant effect:\n· on the skin: Caustic effect on skin and mucous membranes.\n· on the eye:\nStrong caustic effect.\nStrong irritant with the danger of severe eye injury.\n· Sensitization: Sensitization possible through skin contact.\n· Additional toxicological information:\nSwallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus and stomach.\n· Carcinogenic categories\n· IARC (International Agency for Research on Cancer)\nSubstance is not listed.\n· NTP (National Toxicology Program)\nSubstance is not listed.\n· OSHA-Ca (Occupational Safety & Health Administration)\nSubstance is not listed.\n12 Ecological information\n· Toxicity\n· Aquatic toxicity: No further relevant information available.\n· Persistence and degradability biodegradable\n· Behavior in environmental systems:\n· Bioaccumulative potential Does not accumulate in organisms\n(Contd. on page 6)\n\n\nPage 14\nPage 6/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part B\n(Contd. of page 5)\n53.0.5\n· Mobility in soil Potential for mobility in soil is very high.\n· Ecotoxical effects:\n· Remark: Harmful to fish\n· Additional ecological information:\n· General notes:\nWater hazard class 2 (Assessment by list): hazardous for water\nDo not allow product to reach ground water, water course or sewage system.\nMust not reach bodies of water or drainage ditch undiluted or unneutralized.\nDanger to drinking water if even small quantities leak into the ground.\nHarmful to aquatic organisms\n· Results of PBT and vPvB assessment\n· PBT: Not applicable.\n· vPvB: Not applicable.\n· Other adverse effects No further relevant information available.\n13 Disposal considerations\n· Waste treatment methods\n· Recommendation: Contact waste processors for recycling information.\n· Uncleaned packagings:\n· Recommendation: Disposal must be made according to official regulations.\n· Recommended cleansing agent: Water, if necessary with cleansing agents.\n14 Transport information\n· UN-Number\n· DOT, IMDG, IATA\nUN2327\n· UN proper shipping name\n· DOT\nTrimethylhexamethylenediamines\n· IMDG, IATA\nTRIMETHYLHEXAMETHYLENEDIAMINES\n· Transport hazard class(es)\n· DOT\n· Class\n8 Corrosive substances\n· Label\n8 \n· IMDG, IATA\n· Class\n8 Corrosive substances\n· Label\n8 \n· Packing group\n· DOT, IMDG, IATA\nIII\n· Environmental hazards:\nNot applicable.\n· Special precautions for user\nWarning: Corrosive substances\n· Hazard identification number (Kemler code):\n80\n· EMS Number:\nF-A,S-B\n· Stowage Category\nA \n(Contd. on page 7)\n\n\nPage 15\nPage 7/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part B\n(Contd. of page 6)\n53.0.5\n· Segregation Code\nSG35 Stow "separated from" acids.\n· Transport in bulk according to Annex II of MARPOL73/78 and\nthe IBC Code\nNot applicable.\n· Transport/Additional information:\n· DOT\n· Quantity limitations\nOn passenger aircraft/rail: 5 L\nOn cargo aircraft only: 60 L\n· Limited quantities (LQ)\n5L\n· Transport category\n3 \n· Tunnel restriction code\nE \n· IMDG\n· Limited quantities (LQ)\n5L\n· Excepted quantities (EQ)\nCode: E1\nMaximum net quantity per inner packaging: 30 ml\nMaximum net quantity per outer packaging: 1000 ml\n· UN "Model Regulation":\nUN 2327 TRIMETHYLHEXAMETHYLENEDIAMINES, 8, III\n15 Regulatory information\n· Safety, health and environmental regulations/legislation specific for the substance or mixture\nNo further relevant information available.\n· Sara\n· Section 355 (extremely hazardous substances):\nSubstance is not listed.\n· Section 313 (Specific toxic chemical listings):\nSubstance is not listed.\n· TSCA (Toxic Substances Control Act):\nACTIVE\n· Hazardous Air Pollutants\nSubstance is not listed.\n· Proposition 65\n· Chemicals known to cause cancer:\nSubstance is not listed.\n· Chemicals known to cause reproductive toxicity for females:\nSubstance is not listed.\n· Chemicals known to cause reproductive toxicity for males:\nSubstance is not listed.\n· Chemicals known to cause developmental toxicity:\nSubstance is not listed.\n· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.\n16 Other information\nThis information is based on our present knowledge. However, this shall not constitute a guarantee for any specific product features and\nshall not establish a legally valid contractual relationship.\n· Department issuing SDS: Environment protection department.\n· Contact: Kim Dermit\n· Last revision / supersedes version: 05/21/2021 / -\n· Abbreviations and acronyms:\nIMDG: International Maritime Code for Dangerous Goods\nDOT: US Department of Transportation\n(Contd. on page 8)\n\n\nPage 16\nPage 8/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 05/21/2021\nLast revision 05/21/2021\nVersion 1.0\nProduct name: EpoxyBond 14 - Part B\n(Contd. of page 7)\n53.0.5\nIATA: International Air Transport Association\nCAS: Chemical Abstracts Service (division of the American Chemical Society)\nVOC: Volatile Organic Compounds (USA, EU)\nLC50: Lethal concentration, 50 percent\nLD50: Lethal dose, 50 percent\nPBT: Persistent, Bioaccumulative and Toxic\nvPvB: very Persistent and very Bioaccumulative\nOSHA: Occupational Safety & Health\nTLV: Threshold Limit Value\nPEL: Permissible Exposure Limit\nREL: Recommended Exposure Limit\nAcute Tox. 4: Acute toxicity – Category 4\nSkin Corr. 1B: Skin corrosion/irritation – Category 1B\nEye Dam. 1: Serious eye damage/eye irritation – Category 1\nSkin Sens. 1: Skin sensitisation – Category 1\nAquatic Chronic 3: Hazardous to the aquatic environment - long-term aquatic hazard – Category 3\n