HOT RELEASE POWDER: SAFETY DATA SHEET
Also listed as: Mold Release Powder (Hot)
Refer to the original PDF for tables, figures and page layout.
Page 1\n \nPage 1/6\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\n59.1.0\n* 1 Identification\n· Product name: Mold Release, Powder (Hot Mounting)\n· Part number: 200-10100, 200-10110\n· CAS Number:\n557-05-1\n· EC number:\n209-151-9\n· Application of the substance / the mixture Releasing agent\n· Details of the supplier of the safety data sheet\n· Manufacturer/Supplier:\nAllied High Tech Products Inc.\n16207 Carmenita Road\nUSA-Cerritos, CA, 90703\nUSA\ninfo@alliedhightech.com\n· Information department: Product safety department\n· Emergency telephone number:\nDuring normal opening times: +1 (310) 635-2466\nChemtrec: +1 (202) 483-7616\n2 Hazard(s) identification\n· Classification of the substance or mixture\nCombustible Dust May form combustible dust concentrations in air.\n· Label elements\n· GHS label elements The substance is classified and labeled according to the Globally Harmonized System (GHS).\n· Hazard pictograms Void\n· Signal word Warning\n· Hazard statements\nMay form combustible dust concentrations in air.\n3 Composition/information on ingredients\n· Chemical characterization: Substances\n· CAS No. Description\n557-05-1 zinc distearate, pure\n· Identification number(s)\n· EC number: 209-151-9\n4 First-aid measures\n· Description of first aid measures\n· After inhalation: Supply fresh air; consult doctor in case of complaints.\n· After skin contact: Generally the product does not irritate the skin.\n· After eye contact: Rinse opened eye for several minutes under running water.\n· After swallowing: If symptoms persist consult doctor.\n(Contd. on page 2)\n\n\nPage 2\nPage 2/6\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Mold Release, Powder (Hot Mounting)\n(Contd. of page 1)\n59.1.0\n· Information for doctor:\n· Most important symptoms and effects, both acute and delayed\nEye irritation\nDermatitis\n· Indication of any immediate medical attention and special treatment needed No further relevant information available.\n5 Fire-fighting measures\n· Extinguishing media\n· Suitable extinguishing agents:\nFoam\nCarbon dioxide\nUse fire fighting measures that suit the environment.\n· Special hazards arising from the substance or mixture No further relevant information available.\n· Advice for firefighters\n· Protective equipment: No special measures required.\n6 Accidental release measures\n· Personal precautions, protective equipment and emergency procedures Not required.\n· Environmental precautions: No special measures required.\n· Methods and material for containment and cleaning up: Pick up mechanically.\n· Reference to other sections\nSee Section 7 for information on safe handling.\nSee Section 8 for information on personal protection equipment.\nSee Section 13 for disposal information.\n7 Handling and storage\n· Handling:\n· Precautions for safe handling No special precautions are necessary if used correctly.\n· Information about protection against explosions and fires: No special measures required.\n· Conditions for safe storage, including any incompatibilities\n· Storage:\n· Requirements to be met by storerooms and receptacles:\nStore in a cool location.\nNo special requirements.\n· Information about storage in one common storage facility: Not required.\n· Further information about storage conditions: None.\n· Specific end use(s) No further relevant information available.\n8 Exposure controls/personal protection\n· Additional information about design of technical systems: No additional data. See 7.\n· Control parameters\n· Components with limit values that require monitoring at the workplace:\n557-05-1 zinc distearate, pure\nPEL Long-term value: 15* 5** mg/m³\n*total dust **respirable fraction\nREL Long-term value: 10* 5** mg/m³\n*total dust **respirable fraction\nTLV Long-term value: 10* 3** mg/m³\n*inhalable, **respirable particulate matter, *A4\n· Exposure controls\n· Personal protective equipment:\n· General protective and hygienic measures: Wash hands before breaks and at the end of work.\n(Contd. on page 3)\n\n\nPage 3\nPage 3/6\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Mold Release, Powder (Hot Mounting)\n(Contd. of page 2)\n59.1.0\n· Breathing equipment:\nNot required.\nUse suitable respiratory protective device in case of insufficient ventilation.\n· Protection of hands: Not required.\n· Eye protection: Not required.\n9 Physical and chemical properties\n· Information on basic physical and chemical properties\n· General Information\n· Appearance:\nForm:\nPowder\nColor:\nWhite\n· Odor:\nMild\n· Odor threshold:\nNot determined.\n· pH-value:\nNot applicable.\n· Change in condition\nMelting point/Melting range:\n130 °C (266 °F)\nBoiling point/Boiling range:\nUndetermined.\n· Flash point:\n277 °C (530.6 °F)\n· Flammability (solid, gaseous):\nProduct is not flammable.\n· Auto igniting:\n420 °C (788 °F)\n· Decomposition temperature:\nNot determined.\n· Ignition temperature:\nNot determined.\n· Danger of explosion:\nProduct does not present an explosion hazard.\n· Explosion limits:\nLower:\nNot determined.\nUpper:\nNot determined.\n· Vapor pressure:\nNot applicable.\n· Density at 20 °C (68 °F):\n1.09 g/cm³ (9.096 lbs/gal)\n· Bulk density:\n100 kg/m³\n· Relative density\nNot determined.\n· Vapor density\nNot applicable.\n· Specific gravity:\n>1.00 (Water = 1)\n· Evaporation rate\nNot applicable.\n· Solubility in / Miscibility with\nWater:\nInsoluble.\n· Partition coefficient (n-octanol/water): Not determined.\n· Viscosity:\nDynamic:\nNot applicable.\nKinematic:\nNot applicable.\nVOC content:\n0.00 %\nSolids content:\n100.0 %\n· Other information\nNo further relevant information available.\n10 Stability and reactivity\n· Reactivity No further relevant information available.\n(Contd. on page 4)\n\n\nPage 4\nPage 4/6\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Mold Release, Powder (Hot Mounting)\n(Contd. of page 3)\n59.1.0\n· Chemical stability\n· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.\n· Possibility of hazardous reactions No dangerous reactions known.\n· Conditions to avoid\nKeep away from sources of ignition - No smoking.\nKeep away from oxidising agents and acidic substances.\n· Incompatible materials: No further relevant information available.\n· Hazardous decomposition products:\nZinc oxide\nCarbon monoxide and carbon dioxide\n· Additional information: Hazardous decomposition products may form during combustion.\n11 Toxicological information\n· Information on toxicological effects\n· Acute toxicity:\n· LD/LC50 values that are relevant for classification:\n557-05-1 zinc distearate, pure\nOral\nLD50 5,000 mg/kg (rat)\nDermal LD50 >2,000 mg/kg (rabbit)\n· Primary chemical irritant effect:\n· on the skin: No irritant effect.\n· on the eye: No irritating effect.\n· Sensitization: No sensitizing effects known.\n· Additional toxicological information:\nAbrasive eye irritant\nAbrasive skin irritant\n· Carcinogenic categories\n· IARC (International Agency for Research on Cancer)\nSubstance is not listed.\n· NTP (National Toxicology Program)\nSubstance is not listed.\n· OSHA-Ca (Occupational Safety & Health Administration)\nSubstance is not listed.\n12 Ecological information\n· Toxicity\n· Aquatic toxicity: No further relevant information available.\n· Persistence and degradability No further relevant information available.\n· Behavior in environmental systems:\n· Bioaccumulative potential No further relevant information available.\n· Mobility in soil No further relevant information available.\n· Additional ecological information:\n· General notes:\nWater hazard class 1 (Assessment by list): slightly hazardous for water\nDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.\n· Results of PBT and vPvB assessment\n· PBT: Not applicable.\n· vPvB: Not applicable.\n· Other adverse effects No further relevant information available.\n(Contd. on page 5)\n\n\nPage 5\nPage 5/6\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Mold Release, Powder (Hot Mounting)\n(Contd. of page 4)\n59.1.0\n13 Disposal considerations\n· Waste treatment methods\n· Recommendation: Contact waste processors for recycling information.\n· Uncleaned packagings:\n· Recommendation: Disposal must be made according to official regulations.\n14 Transport information\n· UN-Number\n· DOT, ADN, IMDG, IATA\nnot regulated\n· UN proper shipping name\n· DOT, ADN, IMDG, IATA\nnot regulated\n· Transport hazard class(es)\n· DOT, ADN, IMDG, IATA\n· Class\nnot regulated\n· Packing group\n· DOT, IMDG, IATA\nnot regulated\n· Environmental hazards:\n· Marine pollutant:\nNo\n· Special precautions for user\nNot applicable.\n· Transport in bulk according to Annex II of MARPOL73/78 and\nthe IBC Code\nNot applicable.\n· UN "Model Regulation":\nnot regulated\n15 Regulatory information\n· Safety, health and environmental regulations/legislation specific for the substance or mixture\nNo further relevant information available.\n· Sara\n· Section 355 (extremely hazardous substances):\nSubstance is not listed.\n· Section 313 (Specific toxic chemical listings):\nSubstance is listed.\n· TSCA (Toxic Substances Control Act):\nACTIVE\n· Hazardous Air Pollutants\nSubstance is not listed.\n· Proposition 65\n· Chemicals known to cause cancer:\nSubstance is not listed.\n· Chemicals known to cause reproductive toxicity for females:\nSubstance is not listed.\n· Chemicals known to cause reproductive toxicity for males:\nSubstance is not listed.\n· Chemicals known to cause developmental toxicity:\nSubstance is not listed.\n(Contd. on page 6)\n\n\nPage 6\nPage 6/6\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Mold Release, Powder (Hot Mounting)\n(Contd. of page 5)\n59.1.0\n· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.\n16 Other information\nTo the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties\nand does not establish a contractual legal relationship.\n· Department issuing SDS: Technical Services\n· Contact: Pablo Mendoza\n· Last revision / supersedes version: 06/01/2024 / 3.0\n· Supersedes date: 06/01/2022\n· Abbreviations and acronyms:\nADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by\nRoad)\nIMDG: International Maritime Code for Dangerous Goods\nDOT: US Department of Transportation\nIATA: International Air Transport Association\nEINECS: European Inventory of Existing Commercial Chemical Substances\nCAS: Chemical Abstracts Service (division of the American Chemical Society)\nVOC: Volatile Organic Compounds (USA, EU)\nLC50: Lethal concentration, 50 percent\nLD50: Lethal dose, 50 percent\nPBT: Persistent, Bioaccumulative and Toxic\nvPvB: very Persistent and very Bioaccumulative\nOSHA: Occupational Safety & Health\nTLV: Threshold Limit Value\nPEL: Permissible Exposure Limit\nREL: Recommended Exposure Limit\n· * Data compared to the previous version altered. \n