HR-530 brochure1
Refer to the original PDF for tables, figures and page layout.
Page 1\nTest Equipment\nBulletin No. 2255\nRockwell Hardness Testing Machine\nHR-530 Series\n\n\nPage 2\n1\nRockwell Hardness Testing Machine\nHR-530 Series\nUnique electronic control makes the HR-530 series of hardness testers \ncapable of Rockwell, Rockwell Superficial, Rockwell testing of plastics \n(A & B) and Light Force Brinell hardness testing.\nHR-530\n(810-237)\nMaximum specimen size: \nHeight 250 mm, Depth 150 mm\nHR-530L\n(810-337)\nMaximum specimen size: \nHeight 395 mm, Depth 150 mm\n\n\nPage 3\n2\nIndenter\nIndenter\nIndenter\nInside ring hardness testing\nDisplay with color touch-screen\n\nMeasurement with a nose indenter shaft \nA nose-type indenter enables measurement not only of the flat top surface \nof a specimen, but also the inside surface of a cylindrical specimen.\nContinuous measurement function \nRS-232C, Digimatic and USB interface ports\nWhen testing multiple workpieces with the same height, continuous testing \nis possible by pressing the foot switch or the START button. \nGraphic display of statistical calculation results \nand X¯-R control charts\nThis series allows numeric \ndisplay of statistical analysis \nresults such as maximum and \nminimum values, mean value \nand graphic display of X¯-R \ncontrol charts and histograms \nrequired for hardness \nevaluation.\nTest the hardness of the inside wall of a ring without cutting the ring \ninto pieces. (All models.) Minimum diameter is 34 mm, but inside \ndiameters as small as 22 mm can be tested by using the optional 5 mm \ndiamond indenter (19BAA292).\nWhen space restrictions are an \nissue, the touch-panel display \nunit can be mounted on top \nof the tester.\nThe HM and HV series user \ninterface has been adapted \nto include Rockwell hardness \ntesting capabilities. Versatile \ncolor screens display the results \nof statistical calculations and \ngraphics functions, etc.\n5.7-inch color LCD\n\n\nPage 4\n3\nTouch-panel display and function\nThe HR-530/530L models offer the combination of functionality and operability in a touch-panel display.\nHR-530\n(810-237)\n•Standard operating display\n•Direct hardness scale selection\nThe required hardness scale can be selected \nwith the touch panel. The initial test force \nand loading force are automatically set in \naccordance with the selected scale.\n•\u0007Curved surface compensation \nand measurement\nThe curved-surface correction function enables \ncurved surfaces, such as round bars and \nspheres, to be tested for hardness as easily as \nflat surfaces.\nStatistical calculation results and \ntest conditions can be stored \nas text data and graphs can be \nstored as graphic data.\n•Statistical analysis\nThe quality control of industrial materials by \nhardness testing uses a judgment based on \nmulti-point test results. Moreover, the statistical \ncalculation of the maximum value, minimum value, \nmean value, standard deviation, etc., is useful when \nanalyzing multi-point test results.\n\n\nPage 5\n4\n•Simple display\n•List display (mean value)\n•Multi-point test display\n•List display (5-point display)\nProvided with the navigation function to lead to each test \npoint that has been set. This display is dedicated to the \nJominy test which allows multi-point testing with simple \noperation.\nDisplays records of test results as a list. This display is \nappropriate for establishing the relationship between prior \nand subsequent test results in terms of variation and mean \nvalue.\nOnly displays a test result and scale, making it appropriate \nfor repeated testing under the same conditions.\nDisplays the mean hardness value averaged over multiple \narbitrarily specified points.\n\n\nPage 6\n5\nThe relationship between test force, optional indenter size (metric, tungsten carbide) and scale range in Brinell hardness testing is shown in the \ntable below.\nSpecifications\nOrder No.\n810-237\n810-337\nModel\nHR-530\nHR-530L\nHardness testing methods\nRockwell/Rockwell Superficial/Brinell/Plastics hardness\nInitial test force (N)\n29.42N (3kgf), 98.07N (10kgf)\nTest force \n(N)\nRockwell Superficial\n147.1N (15kgf), 294.2N (30kgf), 441.3N (45kgf)\nRockwell\n588.4N (60kgf), 980.7N (100kgf), 1471N (150kgf)\nLight Force Brinell\n61.29 (6.25kgf), 98.07 (10kgf), 153.2 (15.625kgf), 245.2 (25kgf), 294.2 (30kgf), 306.5 (31.25kgf), 612.9 (62.5kgf), 980.7 \n(100kgf), 1226 (125kgf), 1839 (187.5kgf)\nTest force control\nAutomatic (load/hold/unload)\nTable up/down mechanism\nManual (automatic braking and load sequencing)\nControl unit \nColor touch-panel\nTest force switching\nOperated with the display unit\nTest force hold time\n1 to 120s (Selectable in units of 1s)\nMaximum specimen size\nHeight: 9.8" (250 mm)\nDepth: 5.9” (150 mm)\nHeight: 15.5" (395 mm)\nDepth: 5.9” (150 mm)\nPermissible inside diameter of a tube specimen\nMinimum hole diameter: 1.38" (35 mm) (when using the special indenter: .87" (22 mm))\nMaximum table loading\n45 lb (20 kg)\nBall indenter \nTungsten carbide ball indenter\nUnit (display unit)\ninch\nDisplay \nHardness value, test condition, go/no-go judgment result, statistical calculation result, X-R control chart, hardness conversion value\nConversion function [HV, HK, HR (Rockwell hardness A, B, C, D, F, G / Rockwell Superficial 15T, 30T, 45T, 15N, 30N, 45N), HS, HB, tensile strength]\nGo/no-go judgment function\nContinuous test function (for specimens with the same thickness)\nCylindrical correction, spherical correction, offset correction, multi-point correction functions\nStatistical calculation function (maximum value, minimum value, mean value, standard deviation, upper limit value, lower limit value, go count, range, no-go count)\nGraph generation function (X-R control chart)\nLanguage support\nJapanese, English, German, French, Italian, Spanish, Korean, Chinese (simplified characters/traditional characters), Turkish, Portuguese, Hungarian, Polish, Dutch and Czech \nExternal data output\nRS-232C, digimatic, USB2.0\nPower supply \nAC120V\nExternal \ndimensions\nMain unit\n9.84” x 26.38” x 23.82” (250(W)×667(D)×621(H) mm)\n11.8” x 26.2” x 30.1” (300(W)×667(D)×766(H) mm)\nTouch-panel display\n191(W)×147(D)×71(H) mm\nMass\nApprox. 60 kg\nApprox. 69 kg\nNote: Plastic testing may not be enabled, depending on the material. \nOptional accessories\nBrinell hardness testing\nTest force (N)\n61.29\n98.07\n153.2\n245.2\n294.2\n306.5\n612.9\n980.7\n1226\n1839\n11AAD469 \nø1 Indenter \nHBW1/10\nHBW1/30\n11AAD470\nø2.5 Indenter \nHBW2.5/6.25\nHBW2.5/15.625\nHBW2.5/31.25 HBW2.5/62.5\nHBW2.5/187.5\n11AAD471 \nø5 Indenter \nHBW5/25\nHBW5/62.5\nHBW5/125\n11AAD472 \nø10 Indenter \nHBW10/100\nSpecifications/Standard accessories/Options\nStandard accessories\nOrder No.\nItem\nDescription\nOrder No.\nItem\nDescription\n–\nItem\nDescription\n19BAA073 Diamond indenter For Rockwell and Rockwell superficial testing 11AAD185 Display mounting bracket\n–\nHardness test block\n30-35HRC\n11AAD465\nBall indenter\n1/16" Tungsten carbide ball (ø1.5875)\nPower cord\nFor AC115V\n–\nHardness test block\n60-65HRC\n19BAA507\nSpare ball\n1/16"WC (ø1.5875) ball\nVinyl cover\n–\nHardness test block\n90-95HRB\n810-039\nFlat anvil\nø64 mm\nManual\n–\nHardness test block\n64-69HR30N\n810-040\nV-anvil \nø40 mm, Groove width 30 mm\n–\nHardness test block\n70-79HR30T\n–\nAccessory Box\n\n\nPage 7\n6\nJack rest\n810-028\nFor supporting long specimens \n(Used with anvil or round table)\nTesting machine table\n11AAD186\nSupplied with \nstability bracket\nTesting machine table\nFine-adjustment table \nfor Jominy testing\n810-700\nJIS G 0561\nFor steel hardenability testing\nSmall V-anvil\n810-042\n(Outside ø10 mm)\nFor round specimens (max. ø16 mm)\nVARI-REST\n810-027 \nFor testing long specimens (commonly used \nfor the anvil)\nSpecial V-anvil\n810-029\n(Length 400 mm, \n Groove width 50 mm)\nFor round specimens ø14-98 mm\nRound table\n810-037 Outside ø180 mm\nFor large specimens such as molded items\nV-anvil (large)\n810-040\n(Outside ø40 mm, \n Groove width 30 mm)\nFor round specimens (max. ø60 mm)\nSpot anvil\n810-043\n(Outside ø12 mm)\nRound table\n810-038 Outside ø250 mm\nFor large specimens such as molded items\nDiamond-spot anvil\n810-030\n(Outside ø10 mm)\nFor sheet specimens\n*Dedicated to the Rockwell Superficial hardness test\nV-anvil (small)\n810-041\n(Outside ø40 mm, \n Groove width 6 mm)\nFor shaft materials (max. ø8.4 mm)\nSpot anvil \n810-044\n(Outside ø5.5 mm)\nFor sheet specimens\nDigimatic mini-processor \nDP-1VR\n264-504-5A\nConnection cable not supplied. (To be ordered separately.)\nConnection cable (1m) 12AAJ323\nPrinter \nDPU-414\n02AGD600B\nwith connection cable\nUSB Direct Input Tool\n06ADV380D\nFor connection to a USB port on a \nPC.\nVibration isolator\n810-643 \nOnly for mounting hardness testing machines\nData processing software\n11AAC237\nFoot switch\n11AAD537\nCalibration Set\nOrder No.\nOrder No.\nOrder No.\nOrder No.\n64BAA241\n64BAA242\n64BAA243\n64BAA244\nC Scale Set\nB Scale Set\n30N Scale Set\n30T Scale Set\nTest Blocks\nTest Blocks\nTest Blocks\nTest Blocks\n64BAA125\n64BAA126\n64BAA128\n64BAA129\n64BAA124\n64BAA132\n64BAA165\n64BAA140\n64BAA158\n64BAA135\n64BAA167\n64BAA130\nIndenter\nIndenter\nIndenter\nIndenter\n64BAA072\n64BAA078\n64BAA073\n64BAA078\nOrder No.\nScale\n64BAA072\nC\n64BAA073\nN\n64BAA086\nA\n64BAA071\nC & N\n3/8"\n15/32"\n7/16"\n1/4"\nRockwell Diamond Indenters\nCarbide Ball Indenters\nOrder No.\nDescription\n19BAA515\n1/16” Carbide ball indenter\n19BAA504\n1/8” Carbide ball indenter\n19BAA505\n1/4” Carbide ball indenter\n19BAA506\n1/2” Carbide ball indenter\n19BAA507\n1/16” Carbide ball (1pc.)\n19BAA508\n1/8” Carbide ball (1pc.)\n19BAA509\n1/4” Carbide ball (1pc.)\n19BAA510\n1/2” Carbide ball (1pc.)\nPlease see Catalog US-1004 for a complete list of test blocks.\n\n\nPage 8\nCoordinate Measuring Machines\nSensor Systems\nVision Measuring Systems\nTest Equipment\nand Seismometers\nForm Measurement\nDigital Scale and DRO Systems\nOptical Measuring\nSmall Tool Instruments\nand Data Management\nWhatever your challenges are, \nMitutoyo supports you from start to finish.\nMitutoyo is not only a manufacturer of top-quality \nmeasuring products but one that also offers qualified \nsupport for the lifetime of the equipment, backed \nby comprehensive services that ensure your staff can \nmake the very best use of the investment.\nApart from the basics of calibration and repair, \nMitutoyo offers product and metrology training, \nas well as IT support for the sophisticated software \nused in modern measuring technology. We can also \ndesign, build, test and deliver measuring solutions \nand even, if deemed cost-effective, take your critical \nmeasurement challenges in-house on a sub-contract \nbasis.\nDISTRIBUTED BY:\nALLIED HIGH TECH PRODUCTS\n2376 E. PACIFICA PLACE\nRANCHO DOMINGUEZ, CA 90220\n(800) 675-1118 (US & Canada)\n(310) 635-2466 (worldwide)\nwww.alliedhightech.com\n© 2018 Mitutoyo America Corporation\nFind additional product literature \nand our product catalog\nwww.mitutoyo.com\nNote: All information regarding our products, and in particular the illustrations, drawings, dimensional and performance \ndata contained in this printed matter as well as other technical data are to be regarded as approximate average values. We \ntherefore reserve the right to make changes to the corresponding designs. The stated standards, similar technical regulations, \ndescriptions and illustrations of the products were valid at the time of printing. In addition, the latest applicable version of our \nGeneral Trading Conditions will apply. Only quotations submitted by ourselves may be regarded as definitive. Specifications \nare subject to change without notice.\nMitutoyo products are subject to US Export Administration Regulations (EAR). Re-export or relocation of our products may \nrequire prior approval by an appropriate governing authority.\nTrademarks and Registrations\nDesignations used by companies to distinguish their products are often claimed as trademarks. In all instances where Mitutoyo \nAmerica Corporation is aware of a claim, the product names appear in initial capital or all capital letters. The appropriate \ncompanies should be contacted for more complete trademark and registration information.\n