M-Bond 610
Also listed as: SAFETY DATA SHEET
Refer to the original PDF for tables, figures and page layout.
Page 1\nPage 1/10\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\n59.1.0\n* 1 Identification\n· Product name: M-Bond 610 Adhesive\n· Part number: 71-20000\n· Application of the substance / the mixture Adhesives\n· Details of the supplier of the safety data sheet\n· Manufacturer/Supplier:\nAllied High Tech Products Inc.\n16207 Carmenita Road\nUSA-Cerritos, CA, 90703\nUSA\ninfo@alliedhightech.com\n· Information department: Product safety department\n· Emergency telephone number:\nDuring normal opening times: +1 (310) 635-2466\nChemtrec: +1 (202) 483-7616\n2 Hazard(s) identification\n· Classification of the substance or mixture\nGHS02 Flame\nFlammable Liquids 2\nH225 Highly flammable liquid and vapor.\nGHS08 Health hazard\nCarcinogenicity 2\nH351 Suspected of causing cancer.\nGHS09 Environment\nAquatic Chronic 2\nH411 Toxic to aquatic life with long lasting effects.\nGHS07\nSkin Irritation 2\nH315 Causes skin irritation.\nEye Irritation 2A\nH319 Causes serious eye irritation.\nSensitization - Skin 1\nH317 May cause an allergic skin reaction.\nSpecific Target Organ Toxicity - Single Exposure 3 H335 May cause respiratory irritation.\n(Contd. on page 2)\n\n\nPage 2\nPage 2/10\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Adhesive\n(Contd. of page 1)\n59.1.0\n· Label elements\n· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).\n· Hazard pictograms\nGHS02\nGHS07\nGHS08\nGHS09\n· Signal word Danger\n· Hazard-determining components of labeling:\ntetrahydrofuran\nPolyglycidyl Ether of Phenol-Formaldehyde\n· Hazard statements\nHighly flammable liquid and vapor.\nCauses skin irritation.\nCauses serious eye irritation.\nMay cause an allergic skin reaction.\nSuspected of causing cancer.\nMay cause respiratory irritation.\nToxic to aquatic life with long lasting effects.\n· Precautionary statements\nObtain special instructions before use.\nDo not handle until all safety precautions have been read and understood.\nKeep away from heat/sparks/open flames/hot surfaces. - No smoking.\nGround/bond container and receiving equipment.\nUse explosion-proof electrical/ventilating/lighting/equipment.\nUse only non-sparking tools.\nTake precautionary measures against static discharge.\nAvoid breathing dust/fume/gas/mist/vapors/spray\nWash thoroughly after handling.\nUse only outdoors or in a well-ventilated area.\nContaminated work clothing must not be allowed out of the workplace.\nAvoid release to the environment.\nWear protective gloves/protective clothing/eye protection/face protection.\nIf on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.\nIF INHALED: Remove person to fresh air and keep comfortable for breathing.\nIf in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.\nIF exposed or concerned: Get medical advice/attention.\nCall a poison center/doctor if you feel unwell.\nSpecific treatment (see on this label).\nTake off contaminated clothing and wash it before reuse.\nIf skin irritation or rash occurs: Get medical advice/attention.\nIf eye irritation persists: Get medical advice/attention.\nWash contaminated clothing before reuse.\nIn case of fire: Use CO2, powder or water spray to extinguish.\nCollect spillage.\nStore in a well-ventilated place. Keep container tightly closed.\nStore in a well-ventilated place. Keep cool.\nStore locked up.\nDispose of contents/container in accordance with local/regional/national/international regulations.\n3 Composition/information on ingredients\n· Chemical characterization: Mixtures\n· Description: Mixture of the substances listed below with nonhazardous additions.\n(Contd. on page 3)\n\n\nPage 3\nPage 3/10\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Adhesive\n(Contd. of page 2)\n59.1.0\n· Hazardous components and components with occupational exposure limits:\n109-99-9 tetrahydrofuran\n Flammable Liquids 2, H225;\n Carcinogenicity 2, H351;\n Eye Irritation 2A, H319; Specific Target Organ\nToxicity - Single Exposure 3, H335\n60-70%\n28064-14-4 Polyglycidyl Ether of Phenol-Formaldehyde\n Aquatic Chronic 2, H411;\n Skin Irritation 2, H315; Sensitization - Skin 1, H317\n25-30%\n78-93-3 ethyl methyl ketone\n Flammable Liquids 2, H225;\n Eye Irritation 2A, H319; Specific Target Organ Toxicity - Single Exposure 3,\nH336\n5-<10%\n· Additional information: The specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.\n4 First-aid measures\n· Description of first aid measures\n· General information: Immediately remove any clothing soiled by the product.\n· After inhalation:\nSupply fresh air and to be sure call for a doctor.\nIn case of unconsciousness place patient stably in side position for transportation.\n· After skin contact: Immediately wash with water and soap and rinse thoroughly.\n· After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.\n· After swallowing: If symptoms persist consult doctor.\n· Information for doctor:\n· Most important symptoms and effects, both acute and delayed\nBreathing difficulty\nHeadache\nDizziness\nCoughing\nAllergic reactions\nNausea\nDermatitis\nEye irritation\n· Indication of any immediate medical attention and special treatment needed No further relevant information available.\n5 Fire-fighting measures\n· Extinguishing media\n· Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.\n· Special hazards arising from the substance or mixture No further relevant information available.\n· Advice for firefighters\n· Protective equipment: Wear fully protective suit.\n6 Accidental release measures\n· Personal precautions, protective equipment and emergency procedures\nWear protective equipment. Keep unprotected persons away.\nEnsure adequate ventilation\nKeep away from ignition sources\n· Environmental precautions:\nDo not allow product to reach sewage system or any water course.\nDo not allow to enter sewers/ surface or ground water.\nPrevent seepage into sewage system, workpits and cellars.\nInform respective authorities in case of seepage into water course or sewage system.\n· Methods and material for containment and cleaning up:\nAbsorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).\nDispose contaminated material as waste according to section 13.\nEnsure adequate ventilation.\n· Reference to other sections\nSee Section 7 for information on safe handling.\n(Contd. on page 4)\n\n\nPage 4\nPage 4/10\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Adhesive\n(Contd. of page 3)\n59.1.0\nSee Section 8 for information on personal protection equipment.\nSee Section 13 for disposal information.\n7 Handling and storage\n· Handling:\n· Precautions for safe handling\nProtect from heat and direct sunlight.\nEnsure proper ventilation/exhaustion at workplaces.\nOpen and handle receptacle with care.\nPrevent formation of aerosols.\n· Information about protection against explosions and fires:\nKeep ignition sources away - Do not smoke.\nProtect against electrostatic charges.\n· Conditions for safe storage, including any incompatibilities\n· Storage:\n· Requirements to be met by storerooms and receptacles:\nProtect from sunlight.\nStore at temperatures not exceeding 35°C.\n· Information about storage in one common storage facility: Not required.\n· Further information about storage conditions:\nKeep receptacle tightly sealed.\nStore in cool, dry conditions in well sealed receptacles.\nStore receptacle in a well ventilated area.\n· Specific end use(s) No further relevant information available.\n8 Exposure controls/personal protection\n· Additional information about design of technical systems: No additional data. See 7.\n· Control parameters\n· Components with limit values that require monitoring at the workplace:\nThe following constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure limit.\nAt this time, the remaining constituent has no known exposure limits.\n109-99-9 tetrahydrofuran\nPEL Long-term value: 590 mg/m³, 200 ppm\nREL Short-term value: 735 mg/m³, 250 ppm\nLong-term value: 590 mg/m³, 200 ppm\nTLV Short-term value: 100 ppm\nLong-term value: 50 ppm\nSkin, A3, BEI\n78-93-3 ethyl methyl ketone\nPEL Long-term value: 590 mg/m³, 200 ppm\nREL Short-term value: 885 mg/m³, 300 ppm\nLong-term value: 590 mg/m³, 200 ppm\nTLV Short-term value: 150 ppm\nLong-term value: 75 ppm\nBEI, Skin\n· Ingredients with biological limit values:\n109-99-9 tetrahydrofuran\nBEI 2 mg/L\nMedium: urine\nTime: end of shift\nParameter: Tetrahydrofuran\n(Contd. on page 5)\n\n\nPage 5\nPage 5/10\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Adhesive\n(Contd. of page 4)\n59.1.0\n78-93-3 ethyl methyl ketone\nBEI 2 mg/L\nMedium: urine\nTime: end of shift\nParameter: Methyl ethyl ketone (nonspecific)\n· Exposure controls\n· Personal protective equipment:\n· General protective and hygienic measures:\nKeep away from foodstuffs, beverages and feed.\nImmediately remove all soiled and contaminated clothing.\nWash hands before breaks and at the end of work.\nStore protective clothing separately.\nAvoid contact with the eyes and skin.\n· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.\n· Protection of hands:\nDue to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.\nProtective gloves\nThe glove material has to be impermeable and resistant to the product/ the substance/ the preparation.\nSelection of the glove material on consideration of the penetration times, rates of diffusion and the degradation\n· Material of gloves\nPVC or PE gloves\nRecommended thickness of the material: 0.1 mm\nThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer\nto manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance\nand has therefore to be checked prior to the application.\n· Eye protection:\nTightly sealed goggles\n9 Physical and chemical properties\n· Information on basic physical and chemical properties\n· General Information\n· Appearance:\nForm:\nLiquid\nColor:\nColorless\n· Odor:\nEther-like\n· Odor threshold:\nNot determined.\n· pH-value:\nNot determined.\n· Change in condition\nMelting point/Melting range:\nUndetermined.\nBoiling point/Boiling range:\n65.5 °C (149.9 °F)\n· Flash point:\n-14 °C (6.8 °F)\n· Flammability (solid, gaseous):\nHighly flammable.\n· Auto igniting:\n320 °C (608 °F)\n· Decomposition temperature:\nNot determined.\n(Contd. on page 6)\n\n\nPage 6\nPage 6/10\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Adhesive\n(Contd. of page 5)\n59.1.0\n· Ignition temperature:\nProduct is not selfigniting.\n· Danger of explosion:\nProduct is not explosive. However, formation of explosive air/vapor mixtures are possible.\n· Explosion limits:\nLower:\n1.5 Vol %\nUpper:\n12 Vol %\n· Vapor pressure at 20 °C (68 °F):\n172 hPa (129 mm Hg)\n· Density:\nNot determined.\n· Relative density\n0.9 (Water =1)\n· Vapor density\n2.4 (Air=1)\n· Evaporation rate\n8.0 (BuAc=1)\n· Solubility in / Miscibility with\nWater:\nPartly miscible.\n· Partition coefficient (n-octanol/water): Not determined.\n· Viscosity:\nDynamic:\nNot determined.\nKinematic:\nNot determined.\n· Solvent content:\nOrganic solvents:\n70.1 %\nVOC content:\n70.10 %\nSolids content:\n0.0 %\n· Other information\nNo further relevant information available.\n10 Stability and reactivity\n· Reactivity No further relevant information available.\n· Chemical stability\n· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.\n· Possibility of hazardous reactions Reacts with amines.\n· Conditions to avoid\nStore at temperatures not exceeding 32°C.\nProtect from sunlight.\nKeep away from oxidising agents and acidic substances.\nDo not mix with alkalis.\nKeep away from heat.\nKeep away from open flames. - No smoking.\n· Incompatible materials: No further relevant information available.\n· Hazardous decomposition products:\nExplosive peroxides\nPhenolic compounds\nCarbon monoxide and carbon dioxide\n· Additional information: Hazardous decomposition products may form during combustion.\n11 Toxicological information\n· Information on toxicological effects\n· Acute toxicity:\n· LD/LC50 values that are relevant for classification:\n109-99-9 tetrahydrofuran\nOral\nLD50 2,500 mg/kg (rat)\n(Contd. on page 7)\n\n\nPage 7\nPage 7/10\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Adhesive\n(Contd. of page 6)\n59.1.0\n78-93-3 ethyl methyl ketone\nOral\nLD50 3,300 mg/kg (rat)\nDermal LD50 5,000 mg/kg (rabbit)\n· Primary chemical irritant effect:\n· on the skin: Irritant to skin and mucous membranes.\n· on the eye: Irritating effect.\n· Sensitization: Sensitization possible through skin contact.\n· Additional toxicological information:\n· Carcinogenic categories\n· IARC (International Agency for Research on Cancer)\n109-99-9 tetrahydrofuran\n2B\n· NTP (National Toxicology Program)\nNone of the ingredients is listed.\n· OSHA-Ca (Occupational Safety & Health Administration)\nNone of the ingredients is listed.\n12 Ecological information\n· Toxicity\n· Aquatic toxicity:\nLC50 (48 h) 1-10 mg/l (oncorhynchus mykiss)\n· Persistence and degradability No further relevant information available.\n· Behavior in environmental systems:\n· Bioaccumulative potential No further relevant information available.\n· Mobility in soil No further relevant information available.\n· Ecotoxical effects:\n· Remark: Toxic for fish\n· Additional ecological information:\n· General notes:\nWater hazard class 2 (Self-assessment): hazardous for water\nDo not allow product to reach ground water, water course or sewage system.\nDanger to drinking water if even small quantities leak into the ground.\nAlso poisonous for fish and plankton in water bodies.\nToxic for aquatic organisms\n· Results of PBT and vPvB assessment\n· PBT: Not applicable.\n· vPvB: Not applicable.\n· Other adverse effects No further relevant information available.\n13 Disposal considerations\n· Waste treatment methods\n· Recommendation: Contact waste processors for recycling information.\n· Uncleaned packagings:\n· Recommendation: Disposal must be made according to official regulations.\n· Recommended cleansing agent: Water, if necessary with cleansing agents.\n14 Transport information\n· UN-Number\n· DOT, IMDG, IATA\nUN1133\n· UN proper shipping name\n· DOT\nAdhesives\n(Contd. on page 8)\n\n\nPage 8\nPage 8/10\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Adhesive\n(Contd. of page 7)\n59.1.0\n· IMDG\nADHESIVES, MARINE POLLUTANT\n· IATA\nADHESIVES\n· Transport hazard class(es)\n· DOT\n· Class\n3 Flammable liquids\n· Label\n3 \n· IMDG\n· Class\n3 Flammable liquids\n· Label\n3 \n· IATA\n· Class\n3 Flammable liquids\n· Label\n3 \n· Packing group\n· DOT, IMDG, IATA\nII\n· Environmental hazards:\nProduct contains environmentally hazardous substances: Polyglycidyl\nEther of Phenol-Formaldehyde\n· Marine pollutant:\nYes\nSymbol (fish and tree)\n· Special precautions for user\nWarning: Flammable liquids\n· Hazard identification number (Kemler code):\n33\n· EMS Number:\nF-E,S-D\n· Stowage Category\nB \n· Transport in bulk according to Annex II of MARPOL73/78 and\nthe IBC Code\nNot applicable.\n· Transport/Additional information:\n· DOT\n· Quantity limitations\nOn passenger aircraft/rail: 5 L\nOn cargo aircraft only: 60 L\n· Limited quantities (LQ)\n5L\n· Transport category\n2 \n· Tunnel restriction code\nD/E\n· IMDG\n· Limited quantities (LQ)\n5L\n· Excepted quantities (EQ)\nCode: E2\nMaximum net quantity per inner packaging: 30 ml\nMaximum net quantity per outer packaging: 500 ml\n(Contd. on page 9)\n\n\nPage 9\nPage 9/10\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Adhesive\n(Contd. of page 8)\n59.1.0\n· UN "Model Regulation":\nUN 1133 ADHESIVES, 3, II, ENVIRONMENTALLY\nHAZARDOUS\n15 Regulatory information\n· Safety, health and environmental regulations/legislation specific for the substance or mixture\nNo further relevant information available.\n· Sara\n· Section 355 (extremely hazardous substances):\nNone of the ingredients is listed.\n· Section 313 (Specific toxic chemical listings):\nNone of the ingredients is listed.\n· TSCA (Toxic Substances Control Act):\nAll components have the value ACTIVE.\n· Hazardous Air Pollutants\nNone of the ingredients is listed.\n· Proposition 65\n· Chemicals known to cause cancer:\n109-99-9 tetrahydrofuran\n· Chemicals known to cause reproductive toxicity for females:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for males:\nNone of the ingredients is listed.\n· Chemicals known to cause developmental toxicity:\nNone of the ingredients is listed.\n· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.\n16 Other information\nTo the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties\nand does not establish a contractual legal relationship.\n· Department issuing SDS: Technical Services\n· Contact: Pablo Mendoza\n· Last revision / supersedes version: 06/01/2024 / 3.0\n· Supersedes date: 06/01/2022\n· Abbreviations and acronyms:\nADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by\nRoad)\nIMDG: International Maritime Code for Dangerous Goods\nDOT: US Department of Transportation\nIATA: International Air Transport Association\nEINECS: European Inventory of Existing Commercial Chemical Substances\nELINCS: European List of Notified Chemical Substances\nCAS: Chemical Abstracts Service (division of the American Chemical Society)\nVOC: Volatile Organic Compounds (USA, EU)\nLC50: Lethal concentration, 50 percent\nLD50: Lethal dose, 50 percent\nPBT: Persistent, Bioaccumulative and Toxic\nvPvB: very Persistent and very Bioaccumulative\nOSHA: Occupational Safety & Health\nTLV: Threshold Limit Value\nPEL: Permissible Exposure Limit\nREL: Recommended Exposure Limit\nBEI: Biological Exposure Limit\nFlammable Liquids 2: Flammable liquids – Category 2\nSkin Irritation 2: Skin corrosion/irritation – Category 2\nEye Irritation 2A: Serious eye damage/eye irritation – Category 2A\n(Contd. on page 10)\n\n\nPage 10\nPage 10/10\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Adhesive\n(Contd. of page 9)\n59.1.0\nSensitization - Skin 1: Skin sensitisation – Category 1\nCarcinogenicity 2: Carcinogenicity – Category 2\nSpecific Target Organ Toxicity - Single Exposure 3: Specific target organ toxicity (single exposure) – Category 3\nAquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard – Category 2\n· * Data compared to the previous version altered. \n\n\nPage 11\n \nPage 1/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\n59.1.0\n* 1 Identification\n· Product name: M-Bond 610 Curing Agent\n· Part number: 71-20000\n· Application of the substance / the mixture Hardening agent/ Curing agent\n· Details of the supplier of the safety data sheet\n· Manufacturer/Supplier:\nAllied High Tech Products Inc.\n16207 Carmenita Road\nUSA-Cerritos, CA, 90703\nUSA\ninfo@alliedhightech.com\n· Information department: Product safety department\n· Emergency telephone number:\nDuring normal opening times: +1 (310) 635-2466\nChemtrec: +1 (202) 483-7616\n2 Hazard(s) identification\n· Classification of the substance or mixture\nGHS02 Flame\nFlammable Liquids 2\nH225 Highly flammable liquid and vapor.\nGHS08 Health hazard\nSensitization - Respiratory 1\nH334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.\nCarcinogenicity 2\nH351 Suspected of causing cancer.\nGHS05 Corrosion\nEye Damage 1\nH318 Causes serious eye damage.\nGHS07\nSensitization - Skin 1\nH317 May cause an allergic skin reaction.\nSpecific Target Organ Toxicity - Single Exposure 3 H335 May cause respiratory irritation.\n· Label elements\n· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).\n(Contd. on page 2)\n\n\nPage 12\nPage 2/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Curing Agent\n(Contd. of page 1)\n59.1.0\n· Hazard pictograms\nGHS02\nGHS05\nGHS07\nGHS08\n· Signal word Danger\n· Hazard-determining components of labeling:\ntetrahydrofuran\nbenzene-1,2:4,5-tetracarboxylic dianhydride\n· Hazard statements\nHighly flammable liquid and vapor.\nCauses serious eye damage.\nMay cause allergy or asthma symptoms or breathing difficulties if inhaled.\nMay cause an allergic skin reaction.\nSuspected of causing cancer.\nMay cause respiratory irritation.\n· Precautionary statements\nObtain special instructions before use.\nDo not handle until all safety precautions have been read and understood.\nKeep away from heat/sparks/open flames/hot surfaces. - No smoking.\nGround/bond container and receiving equipment.\nUse explosion-proof electrical/ventilating/lighting/equipment.\nUse only non-sparking tools.\nTake precautionary measures against static discharge.\nAvoid breathing dust/fume/gas/mist/vapors/spray\nUse only outdoors or in a well-ventilated area.\nContaminated work clothing must not be allowed out of the workplace.\nWear protective gloves/protective clothing/eye protection/face protection.\n[In case of inadequate ventilation] wear respiratory protection.\nIf on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.\nIF INHALED: Remove person to fresh air and keep comfortable for breathing.\nIf in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.\nImmediately call a poison center/doctor.\nIF exposed or concerned: Get medical advice/attention.\nSpecific treatment (see on this label).\nIf skin irritation or rash occurs: Get medical advice/attention.\nIf experiencing respiratory symptoms: Call a poison center/doctor.\nWash contaminated clothing before reuse.\nIn case of fire: Use CO2, powder or water spray to extinguish.\nStore in a well-ventilated place. Keep container tightly closed.\nStore in a well-ventilated place. Keep cool.\nStore locked up.\nDispose of contents/container in accordance with local/regional/national/international regulations.\n3 Composition/information on ingredients\n· Chemical characterization: Mixtures\n· Description: Mixture of the substances listed below with nonhazardous additions.\n· Hazardous components and components with occupational exposure limits:\n109-99-9 tetrahydrofuran\n Flammable Liquids 2, H225;\n Carcinogenicity 2, H351;\n Eye Irritation 2A, H319; Specific Target Organ\nToxicity - Single Exposure 3, H335\n80-90%\n89-32-7 benzene-1,2:4,5-tetracarboxylic dianhydride\n Sensitization - Respiratory 1, H334;\n Eye Damage 1, H318;\n Sensitization - Skin 1, H317\n5-10%\n(Contd. on page 3)\n\n\nPage 13\nPage 3/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Curing Agent\n(Contd. of page 2)\n59.1.0\n· Non-hazardous components:\n89-05-4 benzene-1,2,4,5-tetracarboxylic acid\n1-5%\n· Additional information: The specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.\n4 First-aid measures\n· Description of first aid measures\n· General information: Immediately remove any clothing soiled by the product.\n· After inhalation:\nSupply fresh air and to be sure call for a doctor.\nIn case of unconsciousness place patient stably in side position for transportation.\n· After skin contact: Immediately wash with water and soap and rinse thoroughly.\n· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.\n· After swallowing: If symptoms persist consult doctor.\n· Information for doctor:\n· Most important symptoms and effects, both acute and delayed\nBreathing difficulty\nHeadache\nDizziness\nCoughing\nAllergic reactions\nNausea\nDermatitis\nEye irritation\n· Indication of any immediate medical attention and special treatment needed No further relevant information available.\n5 Fire-fighting measures\n· Extinguishing media\n· Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.\n· Special hazards arising from the substance or mixture No further relevant information available.\n· Advice for firefighters\n· Protective equipment: Wear fully protective suit.\n6 Accidental release measures\n· Personal precautions, protective equipment and emergency procedures\nWear protective equipment. Keep unprotected persons away.\nEnsure adequate ventilation\nKeep away from ignition sources\n· Environmental precautions:\nDo not allow product to reach sewage system or any water course.\nDo not allow to enter sewers/ surface or ground water.\nPrevent seepage into sewage system, workpits and cellars.\nDilute with plenty of water.\n· Methods and material for containment and cleaning up:\nAbsorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).\nUse neutralizing agent.\nDispose contaminated material as waste according to section 13.\nEnsure adequate ventilation.\n· Reference to other sections\nSee Section 7 for information on safe handling.\nSee Section 8 for information on personal protection equipment.\nSee Section 13 for disposal information.\n(Contd. on page 4)\n\n\nPage 14\nPage 4/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Curing Agent\n(Contd. of page 3)\n59.1.0\n7 Handling and storage\n· Handling:\n· Precautions for safe handling\nProtect from heat and direct sunlight.\nEnsure proper ventilation/exhaustion at workplaces.\nOpen and handle receptacle with care.\nPrevent formation of aerosols.\n· Information about protection against explosions and fires:\nKeep ignition sources away - Do not smoke.\nProtect against electrostatic charges.\n· Conditions for safe storage, including any incompatibilities\n· Storage:\n· Requirements to be met by storerooms and receptacles:\nProtect from sunlight.\nStore at temperatures not exceeding 27°C.\n· Information about storage in one common storage facility: Not required.\n· Further information about storage conditions:\nKeep receptacle tightly sealed.\nStore in cool, dry conditions in well sealed receptacles.\nStore receptacle in a well ventilated area.\n· Specific end use(s) No further relevant information available.\n8 Exposure controls/personal protection\n· Additional information about design of technical systems: No additional data. See 7.\n· Control parameters\n· Components with limit values that require monitoring at the workplace:\nThe following constituent is the only constituent of the product which has a PEL, TLV or other recommended exposure limit.\nAt this time, the remaining constituent has no known exposure limits.\n109-99-9 tetrahydrofuran\nPEL Long-term value: 590 mg/m³, 200 ppm\nREL Short-term value: 735 mg/m³, 250 ppm\nLong-term value: 590 mg/m³, 200 ppm\nTLV Short-term value: 100 ppm\nLong-term value: 50 ppm\nSkin, A3, BEI\n· Ingredients with biological limit values:\n109-99-9 tetrahydrofuran\nBEI 2 mg/L\nMedium: urine\nTime: end of shift\nParameter: Tetrahydrofuran\n· Exposure controls\n· Personal protective equipment:\n· General protective and hygienic measures:\nKeep away from foodstuffs, beverages and feed.\nImmediately remove all soiled and contaminated clothing.\nWash hands before breaks and at the end of work.\nStore protective clothing separately.\nAvoid contact with the eyes.\nAvoid contact with the eyes and skin.\n· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.\n(Contd. on page 5)\n\n\nPage 15\nPage 5/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Curing Agent\n(Contd. of page 4)\n59.1.0\n· Protection of hands:\nDue to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.\nProtective gloves\nThe glove material has to be impermeable and resistant to the product/ the substance/ the preparation.\nSelection of the glove material on consideration of the penetration times, rates of diffusion and the degradation\n· Material of gloves\nThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer\nto manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance\nand has therefore to be checked prior to the application.\n· Eye protection:\nTightly sealed goggles\n9 Physical and chemical properties\n· Information on basic physical and chemical properties\n· General Information\n· Appearance:\nForm:\nLiquid\nColor:\nAmber colored\n· Odor:\nEther-like\n· Odor threshold:\nNot determined.\n· pH-value:\nNot determined.\n· Change in condition\nMelting point/Melting range:\nUndetermined.\nBoiling point/Boiling range:\n65.5 °C (149.9 °F)\n· Flash point:\n-14 °C (6.8 °F)\n· Flammability (solid, gaseous):\nHighly flammable.\n· Auto igniting:\n230 °C (446 °F)\n· Decomposition temperature:\nNot determined.\n· Ignition temperature:\nProduct is not selfigniting.\n· Danger of explosion:\nProduct is not explosive. However, formation of explosive air/vapor mixtures are possible.\n· Explosion limits:\nLower:\n1.5 Vol %\nUpper:\n12 Vol %\n· Vapor pressure at 15 °C (59 °F):\n193.3 hPa (145 mm Hg)\n· Density at 20 °C (68 °F):\n0.959 g/cm³ (8.003 lbs/gal)\n· Relative density\n0.9 (H2O=1)\n· Vapor density\n2.5 (Air=1)\n· Evaporation rate\n>1 (BuAc=1)\n· Solubility in / Miscibility with\nWater:\nFully miscible.\n· Partition coefficient (n-octanol/water): Not determined.\n(Contd. on page 6)\n\n\nPage 16\nPage 6/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Curing Agent\n(Contd. of page 5)\n59.1.0\n· Viscosity:\nDynamic:\nNot determined.\nKinematic:\nNot determined.\n· Solvent content:\nOrganic solvents:\n88.2 %\nVOC content:\n88.21 %\nSolids content:\n11.8 %\n· Other information\nNo further relevant information available.\n10 Stability and reactivity\n· Reactivity No further relevant information available.\n· Chemical stability\n· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.\n· Possibility of hazardous reactions Possible formation of peroxide.\n· Conditions to avoid\nKeep away from oxidising agents and acidic substances.\nKeep away from heat.\nKeep away from open flames. - No smoking.\n· Incompatible materials: Mild steel\n· Hazardous decomposition products:\nExplosive peroxides\nCarbon monoxide and carbon dioxide\n· Additional information: Hazardous decomposition products may form during combustion.\n11 Toxicological information\n· Information on toxicological effects\n· Acute toxicity:\n· LD/LC50 values that are relevant for classification:\n109-99-9 tetrahydrofuran\nOral LD50 2,500 mg/kg (rat)\n89-32-7 benzene-1,2:4,5-tetracarboxylic dianhydride\nOral LD50 2,250 mg/kg (rat)\n· Primary chemical irritant effect:\n· on the skin: No irritant effect.\n· on the eye: Strong irritant with the danger of severe eye injury.\n· Sensitization:\nSensitization possible through inhalation.\nSensitization possible through skin contact.\n· Additional toxicological information:\n· Carcinogenic categories\n· IARC (International Agency for Research on Cancer)\n109-99-9 tetrahydrofuran\n2B\n· NTP (National Toxicology Program)\nNone of the ingredients is listed.\n· OSHA-Ca (Occupational Safety & Health Administration)\nNone of the ingredients is listed.\n(Contd. on page 7)\n\n\nPage 17\nPage 7/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Curing Agent\n(Contd. of page 6)\n59.1.0\n12 Ecological information\n· Toxicity\n· Aquatic toxicity:\nLC50 (48 h) >100 mg/l (oncorhynchus mykiss)\n· Persistence and degradability No further relevant information available.\n· Behavior in environmental systems:\n· Bioaccumulative potential No further relevant information available.\n· Mobility in soil No further relevant information available.\n· Additional ecological information:\n· General notes:\nWater hazard class 1 (Self-assessment): slightly hazardous for water\nDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.\nMust not reach bodies of water or drainage ditch undiluted or unneutralized.\n· Results of PBT and vPvB assessment\n· PBT: Not applicable.\n· vPvB: Not applicable.\n· Other adverse effects No further relevant information available.\n13 Disposal considerations\n· Waste treatment methods\n· Recommendation: Contact waste processors for recycling information.\n· Uncleaned packagings:\n· Recommendation: Disposal must be made according to official regulations.\n· Recommended cleansing agent: Water, if necessary with cleansing agents.\n14 Transport information\n· UN-Number\n· DOT, IMDG, IATA\nUN2056\n· UN proper shipping name\n· DOT\nTetrahydrofuran mixture\n· IMDG, IATA\nTETRAHYDROFURAN mixture\n· Transport hazard class(es)\n· DOT\n· Class\n3 Flammable liquids\n· Label\n3 \n· IMDG, IATA\n· Class\n3 Flammable liquids\n· Label\n3 \n· Packing group\n· DOT, IMDG, IATA\nII\n(Contd. on page 8)\n\n\nPage 18\nPage 8/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Curing Agent\n(Contd. of page 7)\n59.1.0\n· Environmental hazards:\n· Marine pollutant:\nNo\n· Special precautions for user\nWarning: Flammable liquids\n· Hazard identification number (Kemler code):\n33\n· EMS Number:\nF-E,S-D\n· Stowage Category\nB \n· Transport in bulk according to Annex II of MARPOL73/78 and\nthe IBC Code\nNot applicable.\n· Transport/Additional information:\n· DOT\n· Quantity limitations\nOn passenger aircraft/rail: 5 L\nOn cargo aircraft only: 60 L\n· Limited quantities (LQ)\n1L\n· Transport category\n2 \n· Tunnel restriction code\nD/E\n· IMDG\n· Limited quantities (LQ)\n1L\n· Excepted quantities (EQ)\nCode: E2\nMaximum net quantity per inner packaging: 30 ml\nMaximum net quantity per outer packaging: 500 ml\n· UN "Model Regulation":\nUN 2056 TETRAHYDROFURAN MIXTURE, 3, II\n15 Regulatory information\n· Safety, health and environmental regulations/legislation specific for the substance or mixture\nNo further relevant information available.\n· Sara\n· Section 355 (extremely hazardous substances):\nNone of the ingredients is listed.\n· Section 313 (Specific toxic chemical listings):\nNone of the ingredients is listed.\n· TSCA (Toxic Substances Control Act):\nAll components have the value ACTIVE.\n· Hazardous Air Pollutants\nNone of the ingredients is listed.\n· Proposition 65\n· Chemicals known to cause cancer:\n109-99-9 tetrahydrofuran\n· Chemicals known to cause reproductive toxicity for females:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for males:\nNone of the ingredients is listed.\n· Chemicals known to cause developmental toxicity:\nNone of the ingredients is listed.\n· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.\n(Contd. on page 9)\n\n\nPage 19\nPage 9/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: M-Bond 610 Curing Agent\n(Contd. of page 8)\n59.1.0\n16 Other information\nTo the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties\nand does not establish a contractual legal relationship.\n· Department issuing SDS: Technical Services\n· Contact: Pablo Mendoza\n· Last revision / supersedes version: 06/01/2024 / 3.0\n· Supersedes date: 06/01/2022\n· Abbreviations and acronyms:\nADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by\nRoad)\nIMDG: International Maritime Code for Dangerous Goods\nDOT: US Department of Transportation\nIATA: International Air Transport Association\nEINECS: European Inventory of Existing Commercial Chemical Substances\nELINCS: European List of Notified Chemical Substances\nCAS: Chemical Abstracts Service (division of the American Chemical Society)\nVOC: Volatile Organic Compounds (USA, EU)\nLC50: Lethal concentration, 50 percent\nLD50: Lethal dose, 50 percent\nPBT: Persistent, Bioaccumulative and Toxic\nvPvB: very Persistent and very Bioaccumulative\nOSHA: Occupational Safety & Health\nTLV: Threshold Limit Value\nPEL: Permissible Exposure Limit\nREL: Recommended Exposure Limit\nBEI: Biological Exposure Limit\nFlammable Liquids 2: Flammable liquids – Category 2\nEye Damage 1: Serious eye damage/eye irritation – Category 1\nEye Irritation 2A: Serious eye damage/eye irritation – Category 2A\nSensitization - Respiratory 1: Respiratory sensitisation – Category 1\nSensitization - Skin 1: Skin sensitisation – Category 1\nCarcinogenicity 2: Carcinogenicity – Category 2\nSpecific Target Organ Toxicity - Single Exposure 3: Specific target organ toxicity (single exposure) – Category 3\n· * Data compared to the previous version altered. \n