Mounting Wax - Hot
Also listed as: SAFETY DATA SHEET
Refer to the original PDF for tables, figures and page layout.
Page 1\n \nPage 1/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\n59.1.0\n* 1 Identification\n· Product name: Mounting Wax, Hot\n· Part number: 71-10040, 71-10050\n· Application of the substance / the mixture Adhesives\n· Details of the supplier of the safety data sheet\n· Manufacturer/Supplier:\nAllied High Tech Products Inc.\n16207 Carmenita Road\nUSA-Cerritos, CA, 90703\nUSA\ninfo@alliedhightech.com\n· Information department: Product safety department\n· Emergency telephone number:\nDuring normal opening times: +1 (310) 635-2466\nChemtrec: +1 (202) 483-7616\n2 Hazard(s) identification\n· Classification of the substance or mixture\nGHS08 Health hazard\nSensitization - Respiratory 1\nH334 May cause allergy or asthma symptoms or breathing difficulties if inhaled.\nGHS05 Corrosion\nEye Damage 1\nH318 Causes serious eye damage.\nGHS07\nSkin Irritation 2\nH315 Causes skin irritation.\nSensitization - Skin 1\nH317 May cause an allergic skin reaction.\nSpecific Target Organ Toxicity - Single Exposure 3 H335 May cause respiratory irritation.\n· Label elements\n· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).\n(Contd. on page 2)\n\n\nPage 2\nPage 2/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Mounting Wax, Hot\n(Contd. of page 1)\n59.1.0\n· Hazard pictograms\nGHS05\nGHS07\nGHS08\n· Signal word Danger\n· Hazard-determining components of labeling:\nphthalic anhydride\n· Hazard statements\nCauses skin irritation.\nCauses serious eye damage.\nMay cause allergy or asthma symptoms or breathing difficulties if inhaled.\nMay cause an allergic skin reaction.\nMay cause respiratory irritation.\n· Precautionary statements\nAvoid breathing dust/fume/gas/mist/vapors/spray\nWash thoroughly after handling.\nUse only outdoors or in a well-ventilated area.\nContaminated work clothing must not be allowed out of the workplace.\nWear protective gloves / eye protection / face protection.\n[In case of inadequate ventilation] wear respiratory protection.\nIf on skin: Wash with plenty of water.\nIF INHALED: Remove person to fresh air and keep comfortable for breathing.\nIf in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.\nImmediately call a poison center/doctor.\nSpecific treatment (see on this label).\nTake off contaminated clothing and wash it before reuse.\nIf skin irritation or rash occurs: Get medical advice/attention.\nIf experiencing respiratory symptoms: Call a poison center/doctor.\nWash contaminated clothing before reuse.\nStore in a well-ventilated place. Keep container tightly closed.\nStore locked up.\nDispose of contents/container in accordance with local/regional/national/international regulations.\n3 Composition/information on ingredients\n· Chemical characterization: Mixtures\n· Description: Mixture of the substances listed below with nonhazardous additions.\n· Hazardous components and components with occupational exposure limits:\n85-44-9 phthalic anhydride\n Sensitization - Respiratory 1, H334;\n Eye Damage 1, H318;\n Acute Toxicity - Oral 4, H302; Skin Irritation 2,\nH315; Sensitization - Skin 1, H317; Specific Target Organ Toxicity - Single Exposure 3, H335\n60-70%\n107-21-1 ethylene glycol\n Acute Toxicity - Oral 4, H302\n30-40%\n· Additional information: The specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.\n4 First-aid measures\n· Description of first aid measures\n· General information: Immediately remove any clothing soiled by the product.\n· After inhalation:\nSupply fresh air and to be sure call for a doctor.\nIn case of unconsciousness place patient stably in side position for transportation.\n· After skin contact: Immediately wash with water and soap and rinse thoroughly.\n· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.\n(Contd. on page 3)\n\n\nPage 3\nPage 3/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Mounting Wax, Hot\n(Contd. of page 2)\n59.1.0\n· After swallowing: If symptoms persist consult doctor.\n· Information for doctor:\n· Most important symptoms and effects, both acute and delayed\nBreathing difficulty\nDizziness\nCoughing\nAllergic reactions\nNausea\nDermatitis\nEye irritation\n· Indication of any immediate medical attention and special treatment needed No further relevant information available.\n5 Fire-fighting measures\n· Extinguishing media\n· Suitable extinguishing agents: Use fire fighting measures that suit the environment.\n· Special hazards arising from the substance or mixture No further relevant information available.\n· Advice for firefighters\n· Protective equipment: Wear fully protective suit.\n6 Accidental release measures\n· Personal precautions, protective equipment and emergency procedures\nWear protective equipment. Keep unprotected persons away.\nEnsure adequate ventilation\n· Environmental precautions: Do not allow to enter sewers/ surface or ground water.\n· Methods and material for containment and cleaning up:\nUse neutralizing agent.\nDispose contaminated material as waste according to section 13.\nEnsure adequate ventilation.\n· Reference to other sections\nSee Section 7 for information on safe handling.\nSee Section 8 for information on personal protection equipment.\nSee Section 13 for disposal information.\n7 Handling and storage\n· Handling:\n· Precautions for safe handling\nDust well.\nEnsure proper ventilation/exhaustion at workplaces.\n· Information about protection against explosions and fires: No special measures required.\n· Conditions for safe storage, including any incompatibilities\n· Storage:\n· Requirements to be met by storerooms and receptacles: Suitable material for receptacles and pipes: steel or stainless steel.\n· Information about storage in one common storage facility: Not required.\n· Further information about storage conditions:\nKeep receptacle tightly sealed.\nStore receptacle in a well ventilated area.\n· Specific end use(s) No further relevant information available.\n8 Exposure controls/personal protection\n· Additional information about design of technical systems: No additional data. See 7.\n(Contd. on page 4)\n\n\nPage 4\nPage 4/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Mounting Wax, Hot\n(Contd. of page 3)\n59.1.0\n· Control parameters\n· Components with limit values that require monitoring at the workplace:\n85-44-9 phthalic anhydride\nPEL\nLong-term value: 12 mg/m³, 2 ppm\nREL\nLong-term value: 6 mg/m³, 1 ppm\nTLV\nShort-term value: 0.005* mg/m³\nLong-term value: 0.002* 0.05** mg/m³\nA4,Skin;DSEN,RSEN,*inh&vapor;**SL: mg/100cm2\n107-21-1 ethylene glycol\nTLV\nShort-term value: 10** mg/m³, 50* ppm\nLong-term value: 25* ppm\n*vapor fraction:**inh. fraction, aerosol only, A4\nWEEL I (2)\n· Exposure controls\n· Personal protective equipment:\n· General protective and hygienic measures:\nKeep away from foodstuffs, beverages and feed.\nImmediately remove all soiled and contaminated clothing.\nWash hands before breaks and at the end of work.\nAvoid contact with the skin.\nAvoid contact with the eyes and skin.\n· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.\n· Protection of hands:\nDue to missing tests no recommendation to the glove material can be given for the product/ the preparation/ the chemical mixture.\nProtective gloves\nThe glove material has to be impermeable and resistant to the product/ the substance/ the preparation.\nSelection of the glove material on consideration of the penetration times, rates of diffusion and the degradation\n· Material of gloves\nThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer\nto manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance\nand has therefore to be checked prior to the application.\n· Eye protection:\nTightly sealed goggles\n9 Physical and chemical properties\n· Information on basic physical and chemical properties\n· General Information\n· Appearance:\nForm:\nSolid\nColor:\nClear\n· Odor:\nOdorless\n· Odor threshold:\nNot determined.\n· pH-value:\nNot applicable.\n(Contd. on page 5)\n\n\nPage 5\nPage 5/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Mounting Wax, Hot\n(Contd. of page 4)\n59.1.0\n· Change in condition\nMelting point/Melting range:\n68-74 °C (154.4-165.2 °F)\nBoiling point/Boiling range:\n>100 °C (>212 °F)\n· Flash point:\n>263 °C (>505.4 °F)\n· Flammability (solid, gaseous):\nNot determined.\n· Auto igniting:\n580 °C (1,076 °F)\n· Decomposition temperature:\nNot determined.\n· Ignition temperature:\nProduct is not selfigniting.\n· Danger of explosion:\nProduct does not present an explosion hazard.\n· Explosion limits:\nLower:\n1.7 Vol %\nUpper:\n10.5 Vol %\n· Vapor pressure:\nNot applicable.\n· Density at 20 °C (68 °F):\n1.435 g/cm³ (11.975 lbs/gal)\n· Relative density\nNot determined.\n· Vapor density\n>1.0\n· Specific gravity:\n1.31\n· Evaporation rate\nNot applicable.\n· Solubility in / Miscibility with\nWater:\nInsoluble.\n· Partition coefficient (n-octanol/water): Not determined.\n· Viscosity:\nDynamic:\nNot applicable.\nKinematic:\nNot applicable.\n· Solvent content:\nVOC content:\n30.77 %\nSolids content:\n69.2 %\n· Other information\nNo further relevant information available.\n10 Stability and reactivity\n· Reactivity No further relevant information available.\n· Chemical stability\n· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.\n· Possibility of hazardous reactions No dangerous reactions known.\n· Conditions to avoid\nKeep away from heat.\nKeep away from open flames. - No smoking.\n· Incompatible materials: No further relevant information available.\n· Hazardous decomposition products: Carbon monoxide and carbon dioxide\n· Additional information: Hazardous decomposition products may form during combustion.\n11 Toxicological information\n· Information on toxicological effects\n· Acute toxicity:\n· LD/LC50 values that are relevant for classification:\nATE (Acute Toxicity Estimate)\nOral\nLD50 6,067 mg/kg (rat)\n(Contd. on page 6)\n\n\nPage 6\nPage 6/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Mounting Wax, Hot\n(Contd. of page 5)\n59.1.0\n 85-44-9 phthalic anhydride\nOral\nLD50 4,200 mg/kg (rat)\n107-21-1 ethylene glycol\nOral\nLD50 5,840 mg/kg (rat)\nDermal LD50 9,430 mg/kg (rabbit)\n· Primary chemical irritant effect:\n· on the skin: Irritant to skin and mucous membranes.\n· on the eye: Strong irritant with the danger of severe eye injury.\n· Sensitization:\nSensitization possible through inhalation.\nSensitization possible through skin contact.\n· Additional toxicological information:\n· Carcinogenic categories\n· IARC (International Agency for Research on Cancer)\nNone of the ingredients is listed.\n· NTP (National Toxicology Program)\nNone of the ingredients is listed.\n· OSHA-Ca (Occupational Safety & Health Administration)\nNone of the ingredients is listed.\n12 Ecological information\n· Toxicity\n· Aquatic toxicity: No further relevant information available.\n· Persistence and degradability No further relevant information available.\n· Behavior in environmental systems:\n· Bioaccumulative potential No further relevant information available.\n· Mobility in soil No further relevant information available.\n· Additional ecological information:\n· General notes:\nWater hazard class 1 (Self-assessment): slightly hazardous for water\nDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.\nMust not reach bodies of water or drainage ditch undiluted or unneutralized.\n· Results of PBT and vPvB assessment\n· PBT: Not applicable.\n· vPvB: Not applicable.\n· Other adverse effects No further relevant information available.\n13 Disposal considerations\n· Waste treatment methods\n· Recommendation: Contact waste processors for recycling information.\n· Uncleaned packagings:\n· Recommendation: Disposal must be made according to official regulations.\n14 Transport information\n· UN-Number\n· DOT, ADN, IMDG, IATA\nnot regulated\n· UN proper shipping name\n· DOT, ADN, IMDG, IATA\nnot regulated\n(Contd. on page 7)\n\n\nPage 7\nPage 7/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Mounting Wax, Hot\n(Contd. of page 6)\n59.1.0\n· Transport hazard class(es)\n· DOT, ADN, IMDG, IATA\n· Class\nnot regulated\n· Packing group\n· DOT, IMDG, IATA\nnot regulated\n· Environmental hazards:\n· Marine pollutant:\nNo\n· Special precautions for user\nNot applicable.\n· Transport in bulk according to Annex II of MARPOL73/78 and\nthe IBC Code\nNot applicable.\n· UN "Model Regulation":\nnot regulated\n15 Regulatory information\n· Safety, health and environmental regulations/legislation specific for the substance or mixture\nNo further relevant information available.\n· Sara\n· Section 355 (extremely hazardous substances):\nNone of the ingredients is listed.\n· Section 313 (Specific toxic chemical listings):\nAll ingredients are listed.\n· TSCA (Toxic Substances Control Act):\nAll components have the value ACTIVE.\n· Hazardous Air Pollutants\nAll ingredients are listed.\n· Proposition 65\n· Chemicals known to cause cancer:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for females:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for males:\nNone of the ingredients is listed.\n· Chemicals known to cause developmental toxicity:\n107-21-1 ethylene glycol\n· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.\n16 Other information\nTo the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties\nand does not establish a contractual legal relationship.\n· Department issuing SDS: Technical Services\n· Contact: Pablo Mendoza\n· Last revision / supersedes version: 06/01/2024 / 3.0\n· Supersedes date: 06/01/2022\n· Abbreviations and acronyms:\nADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by\nRoad)\nIMDG: International Maritime Code for Dangerous Goods\nDOT: US Department of Transportation\nIATA: International Air Transport Association\nEINECS: European Inventory of Existing Commercial Chemical Substances\n(Contd. on page 8)\n\n\nPage 8\nPage 8/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Mounting Wax, Hot\n(Contd. of page 7)\n59.1.0\nELINCS: European List of Notified Chemical Substances\nCAS: Chemical Abstracts Service (division of the American Chemical Society)\nVOC: Volatile Organic Compounds (USA, EU)\nLC50: Lethal concentration, 50 percent\nLD50: Lethal dose, 50 percent\nPBT: Persistent, Bioaccumulative and Toxic\nvPvB: very Persistent and very Bioaccumulative\nOSHA: Occupational Safety & Health\nTLV: Threshold Limit Value\nPEL: Permissible Exposure Limit\nREL: Recommended Exposure Limit\nAcute Toxicity - Oral 4: Acute toxicity – Category 4\nSkin Irritation 2: Skin corrosion/irritation – Category 2\nEye Damage 1: Serious eye damage/eye irritation – Category 1\nSensitization - Respiratory 1: Respiratory sensitisation – Category 1\nSensitization - Skin 1: Skin sensitisation – Category 1\nSpecific Target Organ Toxicity - Single Exposure 3: Specific target organ toxicity (single exposure) – Category 3\n· * Data compared to the previous version altered. \n