OpTech Polishing Slurry - 3 micron
Also listed as: 3 MICRON SAFETY DATA SHEET
Refer to the original PDF for tables, figures and page layout.
Page 1\n \nPage 1/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\n59.1.0\n* 1 Identification\n· Product name: OpTech Polishing Slurry, 3 micron\n· Part number: 90-188020, 90-188020-G\n· Application of the substance / the mixture Polishing solution\n· Details of the supplier of the safety data sheet\n· Manufacturer/Supplier:\nAllied High Tech Products Inc.\n16207 Carmenita Road\nUSA-Cerritos, CA, 90703\nUSA\ninfo@alliedhightech.com\n· Information department: Product safety department\n· Emergency telephone number:\nDuring normal opening times: +1 (310) 635-2466\nChemtrec: +1 (202) 483-7616\n2 Hazard(s) identification\n· Classification of the substance or mixture\nGHS07\nSensitization - Skin 1 H317 May cause an allergic skin reaction.\nAquatic Acute 3\nH402 Harmful to aquatic life.\n· Label elements\n· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).\n· Hazard pictograms\nGHS07\n· Signal word Warning\n· Hazard-determining components of labeling:\n2-methyl-2H-isothiazol-3-one\n· Hazard statements\nMay cause an allergic skin reaction.\nHarmful to aquatic life.\n· Precautionary statements\nAvoid breathing dust/fume/gas/mist/vapors/spray\nContaminated work clothing must not be allowed out of the workplace.\nAvoid release to the environment.\n(Contd. on page 2)\n\n\nPage 2\nPage 2/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: OpTech Polishing Slurry, 3 micron\n(Contd. of page 1)\n59.1.0\nWear protective gloves.\nIf on skin: Wash with plenty of water.\nIf skin irritation or rash occurs: Get medical advice/attention.\nSpecific treatment (see on this label).\nWash contaminated clothing before reuse.\nDispose of contents/container in accordance with local/regional/national/international regulations.\n3 Composition/information on ingredients\n· Chemical characterization: Mixtures\n· Description: Mixture of the substances listed below with nonhazardous additions.\n· Hazardous components and components with occupational exposure limits:\n1344-28-1 aluminium oxide\n30-40%\n7631-86-9 silicon dioxide, chemically prepared\n10-20%\n102-71-6 Triethanolamine\n Sensitization - Skin 1B, H317\n0.1-<1%\n141-43-5 2-aminoethanol\n Skin Corrosion 1B, H314;\n Acute Toxicity - Oral 4, H302; Acute Toxicity - Dermal 4, H312; Acute\nToxicity - Inhalation 4, H332; Flammable Liquids 4, H227\n<1%\n2682-20-4 2-methyl-2H-isothiazol-3-one\n Acute Toxicity - Oral 3, H301; Acute Toxicity - Dermal 3, H311; Acute Toxicity - Inhalation 2, H330;\n Skin Corrosion 1B, H314; Eye Damage 1, H318;\n Aquatic Acute 1, H400; Aquatic Chronic 1, H410;\n Sensitization - Skin 1A, H317\n0.025-<0.1%\n111-42-2 2,2'-iminodiethanol\n Carcinogenicity 2, H351; Specific Target Organ Toxicity - Repeated Exposure 2, H373;\n Eye Damage 1,\nH318;\n Acute Toxicity - Oral 4, H302; Skin Irritation 2, H315\n<0.1%\n14808-60-7 Quartz (SiO2)\n Carcinogenicity 1A, H350\n<0.1%\n107-22-2 glyoxal\n Germ Cell Mutagenicity 2, H341;\n Acute Toxicity - Inhalation 4, H332; Skin Irritation 2, H315; Eye\nIrritation 2A, H319; Sensitization - Skin 1, H317\n<0.1%\n· Non-hazardous components:\n7732-18-5 water, distilled, conductivity or of similar purity\n50-60%\n· Additional information: The specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.\n4 First-aid measures\n· Description of first aid measures\n· After inhalation:\nSupply fresh air and to be sure call for a doctor.\nIn case of unconsciousness place patient stably in side position for transportation.\n· After skin contact: Immediately wash with water and soap and rinse thoroughly.\n· After eye contact: Rinse opened eye for several minutes under running water.\n· After swallowing: If symptoms persist consult doctor.\n· Information for doctor:\n· Most important symptoms and effects, both acute and delayed\nAllergic reactions\nDermatitis\n· Indication of any immediate medical attention and special treatment needed No further relevant information available.\n5 Fire-fighting measures\n· Extinguishing media\n· Suitable extinguishing agents: Use fire fighting measures that suit the environment.\n· Special hazards arising from the substance or mixture No further relevant information available.\n(Contd. on page 3)\n\n\nPage 3\nPage 3/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: OpTech Polishing Slurry, 3 micron\n(Contd. of page 2)\n59.1.0\n· Advice for firefighters\n· Protective equipment: No special measures required.\n6 Accidental release measures\n· Personal precautions, protective equipment and emergency procedures Not required.\n· Environmental precautions:\nDo not allow to enter sewers/ surface or ground water.\nInform respective authorities in case of seepage into water course or sewage system.\nDilute with plenty of water.\n· Methods and material for containment and cleaning up:\nAbsorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).\nDispose contaminated material as waste according to section 13.\nEnsure adequate ventilation.\n· Reference to other sections\nSee Section 7 for information on safe handling.\nSee Section 8 for information on personal protection equipment.\nSee Section 13 for disposal information.\n7 Handling and storage\n· Handling:\n· Precautions for safe handling\nEnsure proper ventilation/exhaustion at workplaces.\nPrevent formation of aerosols.\n· Information about protection against explosions and fires: No special measures required.\n· Conditions for safe storage, including any incompatibilities\n· Storage:\n· Requirements to be met by storerooms and receptacles:\nStore in a cool location.\nNo special requirements.\n· Information about storage in one common storage facility: Not required.\n· Further information about storage conditions:\nProtect from frost.\nStore receptacle in a well ventilated area.\n· Specific end use(s) No further relevant information available.\n8 Exposure controls/personal protection\n· Additional information about design of technical systems: No additional data. See 7.\n· Control parameters\n· Components with limit values that require monitoring at the workplace:\nThe following constituents are the only constituents of the product which have a PEL, TLV or other recommended exposure limit.\nAt this time, the remaining constituent has no known exposure limits.\n1344-28-1 aluminium oxide\nPEL\nLong-term value: 15*; 5** mg/m³\n*Total dust; ** Respirable fraction\nREL\nLong-term value: 10* 5** mg/m³\nas Al*Total dust**Respirable/pyro powd./welding f.\nTLV\nLong-term value: 1* mg/m³\nas Al; *as respirable fraction, A4\n7631-86-9 silicon dioxide, chemically prepared\nPEL\nLong-term value: 6*3** mg/m³\n*total **respirable\n(Contd. on page 4)\n\n\nPage 4\nPage 4/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: OpTech Polishing Slurry, 3 micron\n(Contd. of page 3)\n59.1.0\n102-71-6 Triethanolamine\nTLV\nLong-term value: 5 mg/m³\n141-43-5 2-aminoethanol\nPEL\nLong-term value: 6 mg/m³, 3 ppm\nREL\nShort-term value: 15 mg/m³, 6 ppm\nLong-term value: 8 mg/m³, 3 ppm\nTLV\nShort-term value: 6 ppm\nLong-term value: 3 ppm\n111-42-2 2,2'-iminodiethanol\nREL\nLong-term value: 15 mg/m³, 3 ppm\nTLV\nLong-term value: 1* mg/m³\nSkin; *inhalable fraction and vapor, A3\n14808-60-7 Quartz (SiO2)\nPEL\nLong-term value: 0.05* mg/m³\n*resp. dust; 30mg/m3/%SiO2+2\nREL\nLong-term value: 0.05* mg/m³\n*respirable dust; See Pocket Guide App. A\nTLV\nLong-term value: 0.025* mg/m³\n*respirable particulate matter, A2\n107-22-2 glyoxal\nREL\nSee Pocket Guide App. C\nTLV\nLong-term value: 0.1* mg/m³\nDSEN;*as inh. fraction and vapor, A4\nWEEL Long-term value: 0.1 mg/m³\nDSEN; (H)\n· Exposure controls\n· Personal protective equipment:\n· General protective and hygienic measures:\nImmediately remove all soiled and contaminated clothing.\nWash hands before breaks and at the end of work.\n· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.\n· Protection of hands:\nProtective gloves\nThe glove material has to be impermeable and resistant to the product/ the substance/ the preparation.\nSelection of the glove material on consideration of the penetration times, rates of diffusion and the degradation\n· Material of gloves\nNitrile rubber, NBR\nThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer\nto manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance\nand has therefore to be checked prior to the application.\n· Eye protection: Goggles recommended during refilling.\n9 Physical and chemical properties\n· Information on basic physical and chemical properties\n· General Information\n· Appearance:\nForm:\nSolution\n(Contd. on page 5)\n\n\nPage 5\nPage 5/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: OpTech Polishing Slurry, 3 micron\n(Contd. of page 4)\n59.1.0\nColor:\nWhite\n· Odor:\nLight\n· Odor threshold:\nNot determined.\n· pH-value at 20 °C (68 °F):\n9-10\n· Change in condition\nMelting point/Melting range:\n-10 °C (14 °F)\nBoiling point/Boiling range:\n110 °C (230 °F)\n· Flash point:\nNot applicable.\n· Flammability (solid, gaseous):\nNot applicable.\n· Decomposition temperature:\nNot determined.\n· Ignition temperature:\nProduct is not selfigniting.\n· Danger of explosion:\nProduct does not present an explosion hazard.\n· Explosion limits:\nLower:\nNot determined.\nUpper:\nNot determined.\n· Vapor pressure at 20 °C (68 °F):\n23 hPa (17.3 mm Hg)\n· Density:\nNot determined.\n· Relative density\nNot determined.\n· Vapor density\nNot determined.\n· Specific gravity at 4 °C (39.2 °F):\n1.1 g/cm³ (9.18 lbs/gal) (Water = 1)\n· Evaporation rate\nNot determined.\n· Solubility in / Miscibility with\nWater:\nFully miscible.\n· Partition coefficient (n-octanol/water): Not determined.\n· Viscosity:\nDynamic:\nNot determined.\nKinematic:\nNot determined.\n· Solvent content:\nOrganic solvents:\n0.9 %\nWater:\n55.4 %\nVOC content:\n0.93 %\nSolids content:\n44.6 %\n· Other information\nNo further relevant information available.\n10 Stability and reactivity\n· Reactivity No further relevant information available.\n· Chemical stability\n· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.\n· Possibility of hazardous reactions No dangerous reactions known.\n· Conditions to avoid\nKeep away from alkaline solutions.\nKeep away from oxidising agents and acidic substances.\nKeep away from heat.\n· Incompatible materials: No further relevant information available.\n· Hazardous decomposition products: Carbon monoxide and carbon dioxide\n· Additional information: Hazardous decomposition products may form during combustion.\n(Contd. on page 6)\n\n\nPage 6\nPage 6/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: OpTech Polishing Slurry, 3 micron\n(Contd. of page 5)\n59.1.0\n11 Toxicological information\n· Information on toxicological effects\n· Acute toxicity:\n· LD/LC50 values that are relevant for classification:\n1344-28-1 aluminium oxide\nOral\nLD50\n>5,000 mg/kg (rat)\n7631-86-9 silicon dioxide, chemically prepared\nOral\nLD50\n7,000 mg/kg (mouse)\nDermal\nLD50\n>2,000 mg/kg (rabbit)\n102-71-6 Triethanolamine\nOral\nLD50\n8,000 mg/kg (rat)\n141-43-5 2-aminoethanol\nOral\nLD50\n2,050 mg/kg (rat)\nDermal\nLD50\n1,000 mg/kg (rabbit)\nInhalative LC50/4 h 11 mg/l (ATE)\n2682-20-4 2-methyl-2H-isothiazol-3-one\nOral\nLD50\n100 mg/kg (ATE)\nDermal\nLD50\n300 mg/kg (ATE)\nInhalative LC50/4 h 0.05 mg/l (ATE)\n111-42-2 2,2'-iminodiethanol\nOral\nLD50\n1,600 mg/kg (rat)\nDermal\nLD50\n12,200 mg/kg (rabbit)\n107-22-2 glyoxal\nOral\nLD50\n7,070 mg/kg (rat)\nDermal\nLD50\n10,000 mg/kg (rabbit)\nInhalative LC50/4 h 11 mg/l (ATE)\n· Primary chemical irritant effect:\n· on the skin: No irritant effect.\n· on the eye: No irritating effect.\n· Sensitization: Sensitization possible through skin contact.\n· Additional toxicological information:\n· Carcinogenic categories\n· IARC (International Agency for Research on Cancer)\n7631-86-9 silicon dioxide, chemically prepared\n3 \n102-71-6 Triethanolamine\n3 \n111-42-2 2,2'-iminodiethanol\n2B\n14808-60-7 Quartz (SiO2)\n1 \n· NTP (National Toxicology Program)\n14808-60-7 Quartz (SiO2)\nK \n· OSHA-Ca (Occupational Safety & Health Administration)\nNone of the ingredients is listed.\n12 Ecological information\n· Toxicity\n· Aquatic toxicity: No further relevant information available.\n· Persistence and degradability biodegradable\n(Contd. on page 7)\n\n\nPage 7\nPage 7/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: OpTech Polishing Slurry, 3 micron\n(Contd. of page 6)\n59.1.0\n· Behavior in environmental systems:\n· Bioaccumulative potential No further relevant information available.\n· Mobility in soil No further relevant information available.\n· Additional ecological information:\n· General notes:\nWater hazard class 1 (Self-assessment): slightly hazardous for water\nDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.\n· Results of PBT and vPvB assessment\n· PBT: Not applicable.\n· vPvB: Not applicable.\n· Other adverse effects No further relevant information available.\n13 Disposal considerations\n· Waste treatment methods\n· Recommendation: Contact waste processors for recycling information.\n· Uncleaned packagings:\n· Recommendation: Disposal must be made according to official regulations.\n· Recommended cleansing agent: Water, if necessary with cleansing agents.\n14 Transport information\n· UN-Number\n· DOT, ADN, IMDG, IATA\nnot regulated\n· UN proper shipping name\n· DOT, ADN, IMDG, IATA\nnot regulated\n· Transport hazard class(es)\n· DOT, ADN, IMDG, IATA\n· Class\nnot regulated\n· Packing group\n· DOT, IMDG, IATA\nnot regulated\n· Environmental hazards:\n· Marine pollutant:\nNo\n· Special precautions for user\nNot applicable.\n· Transport in bulk according to Annex II of MARPOL73/78 and\nthe IBC Code\nNot applicable.\n· UN "Model Regulation":\nnot regulated\n15 Regulatory information\n· Safety, health and environmental regulations/legislation specific for the substance or mixture\nNo further relevant information available.\n· Sara\n· Section 355 (extremely hazardous substances):\nNone of the ingredients is listed.\n· Section 313 (Specific toxic chemical listings):\n1344-28-1 aluminium oxide\n111-42-2 2,2'-iminodiethanol\n· TSCA (Toxic Substances Control Act):\nAll components have the value ACTIVE.\n(Contd. on page 8)\n\n\nPage 8\nPage 8/8\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: OpTech Polishing Slurry, 3 micron\n(Contd. of page 7)\n59.1.0\n· Hazardous Air Pollutants\n111-42-2 2,2'-iminodiethanol\n· Proposition 65\n· Chemicals known to cause cancer:\n111-42-2 2,2'-iminodiethanol\n14808-60-7 Quartz (SiO2)\n· Chemicals known to cause reproductive toxicity for females:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for males:\nNone of the ingredients is listed.\n· Chemicals known to cause developmental toxicity:\nNone of the ingredients is listed.\n· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.\n16 Other information\nTo the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties\nand does not establish a contractual legal relationship.\n· Department issuing SDS: Technical Services\n· Contact: Pablo Mendoza\n· Last revision / supersedes version: 06/01/2024 / 3.0\n· Supersedes date: 06/01/2022\n· Abbreviations and acronyms:\nADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by\nRoad)\nIMDG: International Maritime Code for Dangerous Goods\nDOT: US Department of Transportation\nIATA: International Air Transport Association\nEINECS: European Inventory of Existing Commercial Chemical Substances\nELINCS: European List of Notified Chemical Substances\nCAS: Chemical Abstracts Service (division of the American Chemical Society)\nVOC: Volatile Organic Compounds (USA, EU)\nLC50: Lethal concentration, 50 percent\nLD50: Lethal dose, 50 percent\nPBT: Persistent, Bioaccumulative and Toxic\nvPvB: very Persistent and very Bioaccumulative\nOSHA: Occupational Safety & Health\nTLV: Threshold Limit Value\nPEL: Permissible Exposure Limit\nREL: Recommended Exposure Limit\nFlammable Liquids 4: Flammable liquids – Category 4\nAcute Toxicity - Oral 3: Acute toxicity – Category 3\nAcute Toxicity - Oral 4: Acute toxicity – Category 4\nAcute Toxicity - Inhalation 2: Acute toxicity – Category 2\nSkin Corrosion 1B: Skin corrosion/irritation – Category 1B\nSkin Irritation 2: Skin corrosion/irritation – Category 2\nEye Damage 1: Serious eye damage/eye irritation – Category 1\nEye Irritation 2A: Serious eye damage/eye irritation – Category 2A\nSensitization - Skin 1: Skin sensitisation – Category 1\nSensitization - Skin 1A: Skin sensitisation – Category 1A\nSensitization - Skin 1B: Skin sensitisation – Category 1B\nGerm Cell Mutagenicity 2: Germ cell mutagenicity – Category 2\nCarcinogenicity 1A: Carcinogenicity – Category 1A\nCarcinogenicity 2: Carcinogenicity – Category 2\nSpecific Target Organ Toxicity - Repeated Exposure 2: Specific target organ toxicity (repeated exposure) – Category 2\nAquatic Acute 1: Hazardous to the aquatic environment - acute aquatic hazard – Category 1\nAquatic Acute 3: Hazardous to the aquatic environment - acute aquatic hazard – Category 3\nAquatic Chronic 1: Hazardous to the aquatic environment - long-term aquatic hazard – Category 1\n· * Data compared to the previous version altered. \n