RedLube Polishing Lubricant
Also listed as: SAFETY DATA SHEET
Refer to the original PDF for tables, figures and page layout.
Page 1\n \nPage 1/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\n59.1.0\n* 1 Identification\n· Product name: RedLube Polishing Lubricant\n· Part number: 90-206995 - 90-207010\n· Application of the substance / the mixture Lubricant\n· Details of the supplier of the safety data sheet\n· Manufacturer/Supplier:\nAllied High Tech Products Inc.\n16207 Carmenita Road\nUSA-Cerritos, CA, 90703\nUSA\ninfo@alliedhightech.com\n· Information department: Product safety department\n· Emergency telephone number:\nDuring normal opening times: +1 (310) 635-2466\nChemtrec: +1 (202) 483-7616\n2 Hazard(s) identification\n· Classification of the substance or mixture\nGHS02 Flame\nFlammable Liquids 3\nH226 Flammable liquid and vapor.\nGHS08 Health hazard\nSpecific Target Organ Toxicity - Single Exposure 1 H370 Causes damage to the central nervous system.\nGHS07\nAcute Toxicity - Oral 4\nH302 Harmful if swallowed.\nEye Irritation 2B\nH320 Causes eye irritation.\n· Label elements\n· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).\n· Hazard pictograms\nGHS02\nGHS07\nGHS08\n(Contd. on page 2)\n\n\nPage 2\nPage 2/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: RedLube Polishing Lubricant\n(Contd. of page 1)\n59.1.0\n· Signal word Danger\n· Hazard-determining components of labeling:\nmethyl alcohol\n· Hazard statements\nFlammable liquid and vapor.\nHarmful if swallowed.\nCauses eye irritation.\nCauses damage to the central nervous system.\n· Precautionary statements\nKeep away from heat/sparks/open flames/hot surfaces. - No smoking.\nKeep container tightly closed.\nGround/bond container and receiving equipment.\nUse explosion-proof electrical/ventilating/lighting/equipment.\nUse only non-sparking tools.\nTake precautionary measures against static discharge.\nDo not breathe dust/fume/gas/mist/vapors/spray.\nWash thoroughly after handling.\nDo not eat, drink or smoke when using this product.\nWear protective gloves/protective clothing/eye protection/face protection.\nIf swallowed: Call a poison center/doctor if you feel unwell.\nIf on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.\nIf in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.\nIF exposed: Call a POISON CENTER or doctor/physician.\nSpecific treatment (see on this label).\nRinse mouth.\nIf eye irritation persists: Get medical advice/attention.\nIn case of fire: Use CO2, powder or water spray to extinguish.\nStore in a well-ventilated place. Keep cool.\nStore locked up.\nDispose of contents/container in accordance with local/regional/national/international regulations.\n3 Composition/information on ingredients\n· Chemical characterization: Mixtures\n· Description: Mixture of the substances listed below with nonhazardous additions.\n· Hazardous components and components with occupational exposure limits:\n57-55-6 propylene glycol\n80-90%\n67-56-1 methyl alcohol\n Flammable Liquids 2, H225;\n Acute Toxicity - Oral 3, H301; Acute Toxicity - Dermal 3, H311; Acute Toxicity -\nInhalation 3, H331;\n Specific Target Organ Toxicity - Single Exposure 1, H370\n10-20%\n· Non-hazardous components:\n7632-00-0 sodium nitrite\n Oxidizing Solids 3, H272;\n Acute Toxicity - Oral 3, H301;\n Aquatic Acute 1, H400\n<0.25%\n· Additional information: The specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.\n4 First-aid measures\n· Description of first aid measures\n· General information:\nImmediately remove any clothing soiled by the product.\nSymptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.\n· After inhalation: Supply fresh air; consult doctor in case of complaints.\n· After skin contact: Immediately rinse with water.\n· After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.\n· After swallowing: Immediately call a doctor.\n(Contd. on page 3)\n\n\nPage 3\nPage 3/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: RedLube Polishing Lubricant\n(Contd. of page 2)\n59.1.0\n· Information for doctor:\n· Most important symptoms and effects, both acute and delayed\nGastric or intestinal disorders\nDisorientation\nUnconsciousness\nBreathing difficulty\nHeadache\nDizziness\nCoughing\nNausea\nEye irritation\n· Indication of any immediate medical attention and special treatment needed No further relevant information available.\n5 Fire-fighting measures\n· Extinguishing media\n· Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.\n· For safety reasons unsuitable extinguishing agents: Water with full jet\n· Special hazards arising from the substance or mixture During heating or in case of fire poisonous gases are produced.\n· Advice for firefighters\n· Protective equipment: Wear fully protective suit.\n6 Accidental release measures\n· Personal precautions, protective equipment and emergency procedures\nWear protective equipment. Keep unprotected persons away.\nEnsure adequate ventilation\nKeep away from ignition sources\n· Environmental precautions:\nDo not allow product to reach sewage system or any water course.\nDo not allow to enter sewers/ surface or ground water.\nPrevent seepage into sewage system, workpits and cellars.\nDilute with plenty of water.\n· Methods and material for containment and cleaning up:\nAbsorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).\nDispose contaminated material as waste according to section 13.\nEnsure adequate ventilation.\n· Reference to other sections\nSee Section 7 for information on safe handling.\nSee Section 8 for information on personal protection equipment.\nSee Section 13 for disposal information.\n7 Handling and storage\n· Handling:\n· Precautions for safe handling\nProtect from heat and direct sunlight.\nEnsure proper ventilation/exhaustion at workplaces.\nPrevent formation of aerosols.\n· Information about protection against explosions and fires:\nKeep ignition sources away - Do not smoke.\nProtect against electrostatic charges.\n· Conditions for safe storage, including any incompatibilities\n· Storage:\n· Requirements to be met by storerooms and receptacles:\nStore in a cool location.\nNo special requirements.\n· Information about storage in one common storage facility: Not required.\n(Contd. on page 4)\n\n\nPage 4\nPage 4/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: RedLube Polishing Lubricant\n(Contd. of page 3)\n59.1.0\n· Further information about storage conditions:\nKeep receptacle tightly sealed.\nStore receptacle in a well ventilated area.\n· Specific end use(s) No further relevant information available.\n8 Exposure controls/personal protection\n· Additional information about design of technical systems: No additional data. See 7.\n· Control parameters\n· Components with limit values that require monitoring at the workplace:\n57-55-6 propylene glycol\nWEEL Long-term value: 10 mg/m³\n67-56-1 methyl alcohol\nPEL\nLong-term value: 260 mg/m³, 200 ppm\nREL\nShort-term value: 325 mg/m³, 250 ppm\nLong-term value: 260 mg/m³, 200 ppm\nSkin\nTLV\nShort-term value: 250 ppm\nLong-term value: 200 ppm\nSkin; BEIc\n· Ingredients with biological limit values:\n67-56-1 methyl alcohol\nBEI 15 mg/L\nMedium: urine\nTime: end of shift\nParameter: Methanol (background, nonspecific)\n· Exposure controls\n· Personal protective equipment:\n· General protective and hygienic measures:\nKeep away from foodstuffs, beverages and feed.\nImmediately remove all soiled and contaminated clothing.\nWash hands before breaks and at the end of work.\nAvoid contact with the eyes.\nAvoid contact with the eyes and skin.\n· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.\n· Protection of hands:\nProtective gloves\nThe glove material has to be impermeable and resistant to the product/ the substance/ the preparation.\nSelection of the glove material on consideration of the penetration times, rates of diffusion and the degradation\n· Material of gloves\nButyl rubber, BR\nThe selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer\nto manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance\nand has therefore to be checked prior to the application.\n(Contd. on page 5)\n\n\nPage 5\nPage 5/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: RedLube Polishing Lubricant\n(Contd. of page 4)\n59.1.0\n· Eye protection:\nTightly sealed goggles\n9 Physical and chemical properties\n· Information on basic physical and chemical properties\n· General Information\n· Appearance:\nForm:\nLiquid\nColor:\nRed\n· Odor:\nMild\n· Odor threshold:\nNot determined.\n· pH-value:\nNot determined.\n· Change in condition\nMelting point/Melting range:\nUndetermined.\nBoiling point/Boiling range:\n64 °C (147.2 °F)\n· Flash point:\n43 °C (109.4 °F)\n· Flammability (solid, gaseous):\nFlammable.\n· Auto igniting:\n371 °C (699.8 °F)\n· Decomposition temperature:\nNot determined.\n· Ignition temperature:\nProduct is not selfigniting.\n· Danger of explosion:\nProduct is not explosive. However, formation of explosive air/vapor mixtures are possible.\n· Explosion limits:\nLower:\n2.6 Vol %\nUpper:\n12.6 Vol %\n· Vapor pressure at 20 °C (68 °F):\n0.1 hPa\n· Density at 20 °C (68 °F):\n1.004 g/cm³ (8.378 lbs/gal)\n· Relative density\nNot determined.\n· Vapor density\n2.5\n· Specific gravity:\n1.018 (Water = 1)\n· Evaporation rate\nNot determined.\n· Solubility in / Miscibility with\nWater:\nNot miscible or difficult to mix.\n· Partition coefficient (n-octanol/water): Not determined.\n· Viscosity:\nDynamic:\nNot determined.\nKinematic:\nNot determined.\n· Solvent content:\nOrganic solvents:\n99.9 %\nVOC content:\n99.91 %\nSolids content:\n0.1 %\n· Other information\nNo further relevant information available.\n(Contd. on page 6)\n\n\nPage 6\nPage 6/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: RedLube Polishing Lubricant\n(Contd. of page 5)\n59.1.0\n10 Stability and reactivity\n· Reactivity No further relevant information available.\n· Chemical stability\n· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.\n· Possibility of hazardous reactions No dangerous reactions known.\n· Conditions to avoid\nKeep away from heat.\nKeep away from open flames. - No smoking.\nKeep away from oxidising agents and acidic substances.\n· Incompatible materials: No further relevant information available.\n· Hazardous decomposition products:\nAldehyde\nCarbon monoxide and carbon dioxide\n· Additional information: Hazardous decomposition products may form during combustion.\n11 Toxicological information\n· Information on toxicological effects\n· Acute toxicity:\n· LD/LC50 values that are relevant for classification:\nATE (Acute Toxicity Estimate)\nOral\nLD50\n734 mg/kg\nDermal\nLD50\n2,203 mg/kg\nInhalative LC50/4 h 22 mg/l\n 57-55-6 propylene glycol\nOral\nLD50\n>2,000 mg/kg (rat)\nDermal\nLD50\n20,800 mg/kg (rabbit)\n67-56-1 methyl alcohol\nOral\nLD50\n100 mg/kg (ATE)\nDermal\nLD50\n300 mg/kg (ATE)\nInhalative LC50/4 h 3 mg/l (ATE)\n· Primary chemical irritant effect:\n· on the skin: No irritant effect.\n· on the eye: Irritating effect.\n· Sensitization: No sensitizing effects known.\n· Additional toxicological information:\n· Carcinogenic categories\n· IARC (International Agency for Research on Cancer)\nNone of the ingredients is listed.\n· NTP (National Toxicology Program)\nNone of the ingredients is listed.\n· OSHA-Ca (Occupational Safety & Health Administration)\nNone of the ingredients is listed.\n12 Ecological information\n· Toxicity\n· Aquatic toxicity: No further relevant information available.\n· Persistence and degradability No further relevant information available.\n· Behavior in environmental systems:\n· Bioaccumulative potential No further relevant information available.\n(Contd. on page 7)\n\n\nPage 7\nPage 7/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: RedLube Polishing Lubricant\n(Contd. of page 6)\n59.1.0\n· Mobility in soil No further relevant information available.\n· Additional ecological information:\n· General notes:\nWater hazard class 1 (Self-assessment): slightly hazardous for water\nDo not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.\n· Results of PBT and vPvB assessment\n· PBT: Not applicable.\n· vPvB: Not applicable.\n· Other adverse effects No further relevant information available.\n13 Disposal considerations\n· Waste treatment methods\n· Recommendation: Contact waste processors for recycling information.\n· Uncleaned packagings:\n· Recommendation: Disposal must be made according to official regulations.\n14 Transport information\n· UN-Number\n· DOT, IMDG, IATA\nUN1987\n· UN proper shipping name\n· DOT\nAlcohols, n.o.s. (Methanol)\n· IMDG, IATA\nALCOHOLS, N.O.S. (METHANOL)\n· Transport hazard class(es)\n· DOT\n· Class\n3 Flammable liquids\n· Label\n3 \n· IMDG, IATA\n· Class\n3 Flammable liquids\n· Label\n3 \n· Packing group\n· DOT, IMDG, IATA\nII\n· Environmental hazards:\n· Marine pollutant:\nNo\n· Special precautions for user\nWarning: Flammable liquids\n· Hazard identification number (Kemler code):\n30\n· EMS Number:\nF-E,S-D\n· Stowage Category\nB \n· Transport in bulk according to Annex II of MARPOL73/78 and\nthe IBC Code\nNot applicable.\n(Contd. on page 8)\n\n\nPage 8\nPage 8/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: RedLube Polishing Lubricant\n(Contd. of page 7)\n59.1.0\n· Transport/Additional information:\n· DOT\n· Quantity limitations\nOn passenger aircraft/rail: 60 L\nOn cargo aircraft only: 220 L\n· Limited quantities (LQ)\n1L\n· Transport category\n2 \n· Tunnel restriction code\nD/E\n· IMDG\n· Limited quantities (LQ)\n5L\n· Excepted quantities (EQ)\nCode: E1\nMaximum net quantity per inner packaging: 30 ml\nMaximum net quantity per outer packaging: 1000 ml\n· UN "Model Regulation":\nUN 1987 ALCOHOLS, N.O.S. (METHANOL), 3, II\n15 Regulatory information\n· Safety, health and environmental regulations/legislation specific for the substance or mixture\nNo further relevant information available.\n· Sara\n· Section 355 (extremely hazardous substances):\nNone of the ingredients is listed.\n· Section 313 (Specific toxic chemical listings):\n67-56-1 methyl alcohol\n7632-00-0 sodium nitrite\n· TSCA (Toxic Substances Control Act):\nAll components have the value ACTIVE.\n· Hazardous Air Pollutants\n67-56-1 methyl alcohol\n· Proposition 65\n· Chemicals known to cause cancer:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for females:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for males:\nNone of the ingredients is listed.\n· Chemicals known to cause developmental toxicity:\n67-56-1 methyl alcohol\n· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.\n16 Other information\nTo the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties\nand does not establish a contractual legal relationship.\n· Department issuing SDS: Technical Services\n· Contact: Pablo Mendoza\n· Last revision / supersedes version: 06/01/2024 / 4.0\n· Supersedes date: 06/01/2022\n· Abbreviations and acronyms:\nADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by\nRoad)\nIMDG: International Maritime Code for Dangerous Goods\nDOT: US Department of Transportation\n(Contd. on page 9)\n\n\nPage 9\nPage 9/9\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 5.0\nProduct name: RedLube Polishing Lubricant\n(Contd. of page 8)\n59.1.0\nIATA: International Air Transport Association\nEINECS: European Inventory of Existing Commercial Chemical Substances\nELINCS: European List of Notified Chemical Substances\nCAS: Chemical Abstracts Service (division of the American Chemical Society)\nVOC: Volatile Organic Compounds (USA, EU)\nLC50: Lethal concentration, 50 percent\nLD50: Lethal dose, 50 percent\nPBT: Persistent, Bioaccumulative and Toxic\nvPvB: very Persistent and very Bioaccumulative\nOSHA: Occupational Safety & Health\nTLV: Threshold Limit Value\nPEL: Permissible Exposure Limit\nREL: Recommended Exposure Limit\nBEI: Biological Exposure Limit\nFlammable Liquids 2: Flammable liquids – Category 2\nFlammable Liquids 3: Flammable liquids – Category 3\nAcute Toxicity - Oral 3: Acute toxicity – Category 3\nAcute Toxicity - Oral 4: Acute toxicity – Category 4\nEye Irritation 2B: Serious eye damage/eye irritation – Category 2B\nSpecific Target Organ Toxicity - Single Exposure 1: Specific target organ toxicity (single exposure) – Category 1\n· * Data compared to the previous version altered. \n