Silicon Carbide Abrasive Belts1(US)
Also listed as: Silicon Carbide Abrasive Belts
Refer to the original PDF for tables, figures and page layout.
Page 1\n \nPage 1/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\n59.1.0\n* 1 Identification\n· Product name: Silicon Carbide Abrasive Belts\n· Part number:\n50-10415 - 50-10420\n50-10430 - 50-10435\n50-10440 - 50-10450\n· Application of the substance / the mixture Abrasive\n· Details of the supplier of the safety data sheet\n· Manufacturer/Supplier:\nAllied High Tech Products Inc.\n16207 Carmenita Road\nUSA-Cerritos, CA, 90703\nUSA\ninfo@alliedhightech.com\n· Information department: Product safety department\n· Emergency telephone number:\nDuring normal opening times: +1 (310) 635-2466\nChemtrec: +1 (202) 483-7616\n2 Hazard(s) identification\n· Classification of the substance or mixture The product is not classified, according to the Globally Harmonized System (GHS).\n· Additional information:\nAll components listed for this product are bound within the product. When handled as intended and under normal conditions of use, there is\nno evidence that any of the ingredients are released in amounts that pose a significant health risk.\n· Label elements\n· GHS label elements Void\n· Hazard pictograms Void\n· Signal word Void\n· Hazard statements Void\n3 Composition/information on ingredients\n· Chemical characterization: Mixtures\n· Description: Mixture of the substances listed below with nonhazardous additions.\n· Hazardous components and components with occupational exposure limits:\n409-21-2 silicon carbide\n30-40%\n1317-65-3 Limestone\n Acute Toxicity - Inhalation 4, H332\n5-10%\n14808-60-7 Quartz (SiO2)\n Carcinogenicity 1A, H350\n<0.1%\n· Non-hazardous components:\nPolyester Film, Backing\n20-30%\nPolymeric Resin (cured)\n20-30%\nProprietary Ingredient\n5-10%\n(Contd. on page 2)\n\n\nPage 2\nPage 2/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Silicon Carbide Abrasive Belts\n(Contd. of page 1)\n59.1.0\n· Additional information:\nProduct may contain many or all of the above ingredients.\nThe specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.\n4 First-aid measures\n· Description of first aid measures\n· General information: No special measures required.\n· After inhalation: Supply fresh air; consult doctor in case of complaints.\n· After skin contact: Generally the product does not irritate the skin.\n· After eye contact: Rinse opened eye for several minutes under running water.\n· After swallowing: If symptoms persist consult doctor.\n· Information for doctor:\n· Most important symptoms and effects, both acute and delayed\nEye irritation\nDermatitis\n· Indication of any immediate medical attention and special treatment needed No further relevant information available.\n5 Fire-fighting measures\n· Extinguishing media\n· Suitable extinguishing agents: Use fire fighting measures that suit the environment.\n· Special hazards arising from the substance or mixture No further relevant information available.\n· Advice for firefighters\n· Protective equipment: No special measures required.\n6 Accidental release measures\n· Personal precautions, protective equipment and emergency procedures Not required.\n· Environmental precautions: No special measures required.\n· Methods and material for containment and cleaning up: Dispose of the collected material according to regulations.\n· Reference to other sections\nSee Section 7 for information on safe handling.\nSee Section 8 for information on personal protection equipment.\nSee Section 13 for disposal information.\n7 Handling and storage\n· Handling:\n· Precautions for safe handling No special measures necessary.\n· Information about protection against explosions and fires: No special measures required.\n· Conditions for safe storage, including any incompatibilities\n· Storage:\n· Requirements to be met by storerooms and receptacles:\nStore in a cool location.\nNo special requirements.\n· Information about storage in one common storage facility: Not required.\n· Further information about storage conditions: Store in dry conditions.\n· Specific end use(s) No further relevant information available.\n8 Exposure controls/personal protection\n· Additional information about design of technical systems: No additional data. See 7.\n(Contd. on page 3)\n\n\nPage 3\nPage 3/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Silicon Carbide Abrasive Belts\n(Contd. of page 2)\n59.1.0\n· Control parameters\n· Components with limit values that require monitoring at the workplace:\n409-21-2 silicon carbide\nPEL Long-term value: 15* 5** mg/m³\nfibrous dust: *total dust **respirable fraction\nREL Long-term value: 10* 5** mg/m³\n*total dust **respirable fraction\nTLV Long-term value: 10* 3** mg/m³\nfibrous dust:0.1 f/cc A2, nonfibrous:*inh.,**resp.\n1317-65-3 Limestone\nPEL Long-term value: 15 mg/m³\n14808-60-7 Quartz (SiO2)\nPEL Long-term value: 0.05* mg/m³\n*resp. dust; 30mg/m3/%SiO2+2\nREL Long-term value: 0.05* mg/m³\n*respirable dust; See Pocket Guide App. A\nTLV Long-term value: 0.025* mg/m³\n*respirable particulate matter, A2\n· Exposure controls\n· Personal protective equipment:\n· General protective and hygienic measures: The usual precautionary measures for handling chemicals should be followed.\n· Breathing equipment:\nNot required.\nUse suitable respiratory protective device in case of insufficient ventilation.\n· Protection of hands: Not required.\n· Eye protection: Not required.\n9 Physical and chemical properties\n· Information on basic physical and chemical properties\n· General Information\n· Appearance:\nForm:\nBelt\nColor:\nAccording to product specification\n· Odor:\nOdorless\n· Odor threshold:\nNot determined.\n· pH-value:\nNot applicable.\n· Change in condition\nMelting point/Melting range:\nUndetermined.\nBoiling point/Boiling range:\nUndetermined.\n· Flash point:\nNot applicable.\n· Flammability (solid, gaseous):\nNot determined.\n· Decomposition temperature:\nNot determined.\n· Ignition temperature:\nProduct is not selfigniting.\n· Danger of explosion:\nProduct does not present an explosion hazard.\n· Explosion limits:\nLower:\nNot determined.\nUpper:\nNot determined.\n(Contd. on page 4)\n\n\nPage 4\nPage 4/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Silicon Carbide Abrasive Belts\n(Contd. of page 3)\n59.1.0\n· Vapor pressure:\nNot applicable.\n· Density:\nNot determined.\n· Relative density\nNot determined.\n· Vapor density\nNot applicable.\n· Evaporation rate\nNot applicable.\n· Solubility in / Miscibility with\nWater:\nInsoluble.\n· Partition coefficient (n-octanol/water): Not determined.\n· Viscosity:\nDynamic:\nNot applicable.\nKinematic:\nNot applicable.\n· Solvent content:\nVOC content:\n0.00 %\nSolids content:\n100.0 %\n· Other information\nNo further relevant information available.\n10 Stability and reactivity\n· Reactivity No further relevant information available.\n· Chemical stability\n· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.\n· Possibility of hazardous reactions No dangerous reactions known.\n· Conditions to avoid No further relevant information available.\n· Incompatible materials: No further relevant information available.\n· Hazardous decomposition products: Carbon monoxide and carbon dioxide\n· Additional information: Hazardous decomposition products may form during combustion.\n11 Toxicological information\n· Information on toxicological effects\n· Acute toxicity:\n· LD/LC50 values that are relevant for classification:\nATE (Acute Toxicity Estimate)\nInhalative LC50/4 h 33.7 mg/l (rat)\n 409-21-2 silicon carbide\nOral\nLD50\n>2,000 mg/kg (rat)\nDermal\nLD50\n>2,000 mg/kg (rat)\n1317-65-3 Limestone\nOral\nLD50\n6,450 mg/kg (rat)\nDermal\nLD50\n>2,000 mg/kg (rat)\nInhalative LC50/4 h 3 mg/l (rat)\n· Primary chemical irritant effect:\n· on the skin: No irritant effect.\n· on the eye: No irritating effect.\n· Sensitization: No sensitizing effects known.\n· Additional toxicological information:\nAbrasive skin irritant\nAbrasive eye irritant\nWhen used and handled according to specifications, the product does not have any harmful effects according to our experience and the\ninformation provided to us.\n(Contd. on page 5)\n\n\nPage 5\nPage 5/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Silicon Carbide Abrasive Belts\n(Contd. of page 4)\n59.1.0\n· Carcinogenic categories\n· IARC (International Agency for Research on Cancer)\n409-21-2 silicon carbide\n2A\n14808-60-7 Quartz (SiO2)\n1 \n· NTP (National Toxicology Program)\n14808-60-7 Quartz (SiO2)\nK \n· OSHA-Ca (Occupational Safety & Health Administration)\nNone of the ingredients is listed.\n12 Ecological information\n· Toxicity\n· Aquatic toxicity: No further relevant information available.\n· Persistence and degradability No further relevant information available.\n· Behavior in environmental systems:\n· Bioaccumulative potential No further relevant information available.\n· Mobility in soil No further relevant information available.\n· Additional ecological information:\n· General notes: Not hazardous for water.\n· Results of PBT and vPvB assessment\n· PBT: Not applicable.\n· vPvB: Not applicable.\n· Other adverse effects No further relevant information available.\n13 Disposal considerations\n· Waste treatment methods\n· Recommendation: Contact waste processors for recycling information.\n· Uncleaned packagings:\n· Recommendation: Disposal must be made according to official regulations.\n14 Transport information\n· UN-Number\n· DOT, ADN, IMDG, IATA\nnot regulated\n· UN proper shipping name\n· DOT, ADN, IMDG, IATA\nnot regulated\n· Transport hazard class(es)\n· DOT, ADN, IMDG, IATA\n· Class\nnot regulated\n· Packing group\n· DOT, IMDG, IATA\nnot regulated\n· Environmental hazards:\nNot applicable.\n· Special precautions for user\nNot applicable.\n· Transport in bulk according to Annex II of MARPOL73/78 and\nthe IBC Code\nNot applicable.\n· UN "Model Regulation":\nnot regulated\n(Contd. on page 6)\n\n\nPage 6\nPage 6/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Silicon Carbide Abrasive Belts\n(Contd. of page 5)\n59.1.0\n15 Regulatory information\n· Safety, health and environmental regulations/legislation specific for the substance or mixture\n· Sara\n· Section 355 (extremely hazardous substances):\nNone of the ingredients is listed.\n· Section 313 (Specific toxic chemical listings):\nNone of the ingredients is listed.\n· TSCA (Toxic Substances Control Act):\nAll other ingredients are exempt from listing.\n409-21-2 silicon carbide\nACTIVE\nPolymeric Resin (cured)\nACTIVE\n1317-65-3 Limestone\nACTIVE\nProprietary Ingredient\nACTIVE\n14808-60-7 Quartz (SiO2)\nACTIVE\n· Hazardous Air Pollutants\nNone of the ingredients is listed.\n· Proposition 65\n· Chemicals known to cause cancer:\n14808-60-7 Quartz (SiO2)\n· Chemicals known to cause reproductive toxicity for females:\nNone of the ingredients is listed.\n· Chemicals known to cause reproductive toxicity for males:\nNone of the ingredients is listed.\n· Chemicals known to cause developmental toxicity:\nNone of the ingredients is listed.\n· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.\n16 Other information\nTo the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties\nand does not establish a contractual legal relationship.\n· Department issuing SDS: Technical Services\n· Contact: Pablo Mendoza\n· Last revision / supersedes version: 06/01/2024 / 3.0\n· Supersedes date: 06/01/2022\n· Abbreviations and acronyms:\nADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by\nRoad)\nIMDG: International Maritime Code for Dangerous Goods\nDOT: US Department of Transportation\nIATA: International Air Transport Association\nEINECS: European Inventory of Existing Commercial Chemical Substances\nELINCS: European List of Notified Chemical Substances\nCAS: Chemical Abstracts Service (division of the American Chemical Society)\nVOC: Volatile Organic Compounds (USA, EU)\nLC50: Lethal concentration, 50 percent\nLD50: Lethal dose, 50 percent\nPBT: Persistent, Bioaccumulative and Toxic\nvPvB: very Persistent and very Bioaccumulative\nOSHA: Occupational Safety & Health\nTLV: Threshold Limit Value\nPEL: Permissible Exposure Limit\nREL: Recommended Exposure Limit\nAcute Toxicity - Inhalation 4: Acute toxicity – Category 4\n(Contd. on page 7)\n\n\nPage 7\nPage 7/7\nSafety Data Sheet\nacc. to OSHA HCS\nPrinting date 07/02/2024\nLast revision 06/01/2024\nVersion 4.0\nProduct name: Silicon Carbide Abrasive Belts\n(Contd. of page 6)\n59.1.0\nCarcinogenicity 1A: Carcinogenicity – Category 1A\n· * Data compared to the previous version altered. \n