TechCut 6x Product Spotlight-2025 Digital
Refer to the original PDF for tables, figures and page layout.
Page 1\nTechCut 6x™\nPrecision Sectioning Machine \nProduct Spotlight \n\n\nPage 2\n•\t\n9" color LCD touchscreen to control all functions\n•\t\nIntuitive interface optimized for productivity and efficiency\n•\t\nSelectable units of measure — imperial or metric\n•\t\nUser programmable parameters for control of X (index), \nY (feed) and Z (blade height) axis motions\n•\t\nSelectable cutting force (low, medium, high)\n•\t\nDisplay of estimated cut time and time remaining\n•\t\nClosed-loop positional monitoring with live readout on \nX/Y/Z axes\n•\t\nClosed-loop load monitoring for optimizing feed rate to \nreduce blade binding/breakage\n•\t\nT-slot interface providing maximum versatility with a \nwide variety of fixtures/accessories\n•\t\nMotorized X/Y/Z-axis sample/blade positioning with \nproportional joystick control\n•\t\nSerial sectioning in either two (2) or three (3) axes\n•\t\nLaser aid for quick, visual sample alignment\n•\t\nPush-button spindle lock for easy blade changes\n•\t\nRecirculating external coolant system \nFeatures:\n02 ALLiED HIGH TECH PRODUCTS, INC.\nPRODUCT SPOTLIGHT\nTechCut 6x™ Introduction\nIndustry Leading Cut Capacity\nThe TechCut 6x™ is a precision multiaxis sectioning machine that \nis highly configurable for a wide variety of cutting applications. \nFeaturing fully programmable X, Y and Z-axis control, the system \nenables automated, repeatable sectioning of a wide range of \nmaterials. \n\n\nPage 3\nPRODUCT SPOTLIGHT\n03\nALLiED HIGH TECH PRODUCTS, INC.\nT-Slot Configurations\nAdapter Plate Configurations\nServo Motor Advantage\nMultiple Programmable Modes\nTorque\n0\n500\n1,000\n1,500\n2,000\n2,500\n3,000\n3,500\n4,000\n4,500\n5,000\nSpeed, RPM\n\n\nPage 4\n04 ALLiED HIGH TECH PRODUCTS, INC.\nPRODUCT SPOTLIGHT\nSurface Hardened Ferrous Gear\n1-Axis Cut\nIn this single axis mode of motion, the sample is fed through \nthe blade according to the user-input parameters controlling \nfeed rate, cut length, blade RPM and force. \n \nSize: Ø 7" x 2.5" H (Ø 177.8 mm x 63.5 mm H)\nHardness: 35.0 HRC (center)\n\n\nPage 5\nParameters Used\nBlade RPM\n3,500\nCut Length (Y)\n4"–8" (102 mm–203 mm)\nFeed Rate (Y)\n0.75" (19 mm)/minute\nForce\nHigh\nTime\n5–10 minutes\n05\nALLiED HIGH TECH PRODUCTS, INC.\nSectioning Configuration\nBlade Type: 9" (230 mm) Aluminum Oxide, Resin Bond\nFixture: Vertical Clamp\nPRODUCT SPOTLIGHT\n\n\nPage 6\nPRODUCT SPOTLIGHT\n06 ALLiED HIGH TECH PRODUCTS, INC.\nFerrous Weld Section \n2-Axis Cut\nUseful for cutting through larger samples, in this 2-axis \nmode of motion the blade height (Z-axis) is adjusted to the \nuser defined interval and the sample is fed (Y-axis) into the \nblade (in serial) until sectioning is complete. \nSize: 6" L x 6" W x 3.25" H (152.4 mm L x 152.4 mm W x 82.55 mm H)\nHardness: 54.2 HRA (Center)\n\n\nPage 7\nPRODUCT SPOTLIGHT\n07\nALLiED HIGH TECH PRODUCTS, INC.\nSectioning Configuration\nBlade Type: 9" (230 mm) Aluminum Oxide, Resin Bond\nFixture: Vertical Clamp\nParameters Used\nBlade RPM\n3,000\nCut Length (Y)\n8" (203 mm)\nFeed Rate (Y)\n1.5" (38 mm)/minute\nForce\nHigh\nDepth Per Pass (Z)\n0.5" (12.7 mm)\nTotal Depth (Z)\n2.5" (63.5 mm)\nTime\n13–26 minutes\n\n\nPage 8\nPRODUCT SPOTLIGHT\nNitrided Ferrous Cylinder\nUseful for cutting several pieces of similar thickness from \na sample, in this 3-axis mode of motion the blade height \n(Z-axis) and sample indexing (X-axis) are adjusted to the user \ndefined intervals and the sample is fed (Y-axis) into the blade \n(in serial) until the serial sectioning cycle is complete. \nSize: Ø 2.25" x 6" L (Ø 57.15 mm x 152.4 mm L)\nHardness: 41.4 HRC\n3-Axis Cut\n\n\nPage 9\n09\nALLiED HIGH TECH PRODUCTS, INC.\nPRODUCT SPOTLIGHT\nSectioning Configuration\nBlade Type: 9" (230 mm) Aluminum Oxide, Resin Bond\nFixture: Quick-Slide Vise\nParameters Used\nBlade RPM\n3,000\nCut Length (Y)\n4" (102 mm)\nFeed Rate (Y)\n1.5" (38 mm)/minute\nForce\nHigh\nSample Width (X)\n0.25" (6.35 mm)\nBlade Width\n0.06" (1.5 mm)\nDepth per Pass (Z)\n1" (25.4 mm)\nTotal Depth (Z)\n2" (50.8 mm)\nNumber of Samples\n3\nTime\n10–16 minutes\n\n\nPage 10\nALLiED HIGH TECH PRODUCTS, INC.\n10\nPRODUCT SPOTLIGHT\n5-5650 \n3-Axis Model (X-Y-Z)\n5-5675 \n2-Axis Model (Y-Z)\nTwo Models Available\n\n\nPage 11\nPRODUCT SPOTLIGHT\n11\nALLiED HIGH TECH PRODUCTS, INC.\n•\t\nOperating voltage: 200–240V 50/60 Hz 1 Phase\n•\t\nBlade motor: powerful, constant torque output \nservo, 84.5 in-lb. (9.55 N-m) peak torque\n•\t\nBlade speed: 100–5000 RPM, 100 RPM +/- \nincrements, 1 RPM input resolution\n•\t\nBlade range: 3–9" (76–230 mm) with either 0.5" \n(12.7 mm) or 1.25" (32 mm) arbor hole\n•\t\nY-axis feed rate: 0.01"–10" (0.1 mm –250 mm) \nper minute, 0.01" (0.1 mm) increments\n•\t\nY-axis maximum travel: 9" (230 mm), 0.01" \n(0.1 mm) increments\n•\t\nX-axis maximum travel: 4" (100 mm), 0.001" \n(0.01 mm) increments\n•\t\nZ-axis maximum travel: 3.6" (91 mm), 0.01" \n(0.1 mm) increments\n•\t\nT-slot table dimensions: 11" W x 8.5" L (280 mm \nx 215 mm) with 0.5" (12.7 mm) T-slots\n•\t\nCutting capacity: up to 3.5" (89 mm) bar stock \n•\t\nRecirculating external coolant system: 7-gallon \n(26.5 L) capacity \n•\t\nDimensions: 28.5" W x 24.5" D x 20.75" H \n(724 mm x 622 x 527 mm)\n•\t\nWeight: 204 lb. (92.5 kg) \n•\t\nTwo (2) year warranty\n•\t\nDesigned & manufactured by Allied in the USA\nTechnical Specs\n\n\nPage 12\nwww.alliedhightech.com \nTechCut 6x™ Product Spotlight- 2025\nAdvancing technology\nthrough sample preparation!\n