{
  "title": "Backing pad 125mm velcro pad multihole slim M8 for LHR15 and LHR12 polisher - Rupes tools · 981.027N",
  "kind": "product",
  "company": "RUPES",
  "category": "Automation, fixtures & accessories",
  "parameters": {
    "sku": "981.027N",
    "Ø mm": "125",
    "Interface": "Velcro",
    "Holes": "MULTIHOLE SLIM",
    "Hardness": "Hard",
    "Tool": "LHR15-12",
    "Fitting": "M8-M",
    "Unit": "1",
    "Code": "981.027N"
  },
  "summary": "RUPES 981.027N 是直径 125 mm 的硬质魔术贴背盘，采用 MULTIHOLE SLIM 多孔薄型结构和 M8 公接口，适配 LHR15 与 LHR12 双动作抛光机。",
  "sections": [
    {
      "heading": "核心规格",
      "paragraphs": [
        "背盘直径 125 mm，Velcro 粘扣界面，MULTIHOLE SLIM 孔型，硬度为 Hard。",
        "安装接口为 M8 公螺纹，产品代码 981.027N，单件包装。"
      ]
    },
    {
      "heading": "兼容机型",
      "paragraphs": [
        "适配 LHR15 和 LHR12 系列。125 mm 规格适合与对应尺寸泡棉、羊毛或超细纤维抛光垫组合。",
        "不得仅凭 M8 螺纹相同就用于其他设备，还需核对设备允许盘径、偏心轨迹和最高转速。"
      ]
    },
    {
      "heading": "工艺特点",
      "paragraphs": [
        "硬质背盘能较直接地传递机器运动，适合需要稳定平面支撑和可控切削的抛光步骤。",
        "薄型多孔结构降低盘体厚度并改善操控，但边缘区域仍需避免倾斜施压。"
      ]
    },
    {
      "heading": "检查要点",
      "paragraphs": [
        "装垫时保持中心对齐，避免高转速下产生不平衡。定期检查粘扣面磨损、盘体翘曲和 M8 螺纹。",
        "更换抛光垫或背盘前断电；出现异常振动应立即停机。"
      ]
    }
  ],
  "updated_at": "2026-10-12 00:33:19"
}