{
  "title": "Georg Fischer shot-blast legacy parts and TITAN upgrade guide",
  "kind": "reference",
  "company": "Wheelabrator",
  "category": "Mass finishing & blasting systems",
  "parameters": {
    "Machine family": "Georg Fischer legacy shot-blast machines",
    "Original parts": "Wheel hubs; feed spouts; model-specific wear parts",
    "Legacy wear material": "Cast material",
    "Upgrade families": "TITAN 15; TITAN 17; TITAN SMART",
    "TITAN material": "Hardened tool steel",
    "TITAN SMART comparison": "Approximately 10% longer wear life than GF wheels"
  },
  "summary": "This reference supports maintenance planning for Georg Fischer-branded shot-blast machines and compares their legacy wheel arrangement with Wheelabrator TITAN replacement technologies. It distinguishes original model-specific parts from upgrade choices intended to reduce change time, inventory complexity and abrasive or energy cost.",
  "sections": [
    {
      "heading": "Legacy-machine support",
      "paragraphs": [
        "Georg Fischer began manufacturing shot-blast machines in 1937 and later participated in the Georg Fischer, DISA and BMD combination that supplied heavy-duty wheelblast equipment. The surviving machines are legacy assets, so correct identification from the nameplate, wheel direction and installed assembly is essential before ordering parts.",
        "Original-support scope includes model-specific components such as wheel hubs and feed spouts. Record the machine serial number, blast-wheel arrangement and rotation direction before comparing a replacement or upgrade."
      ]
    },
    {
      "heading": "Wheel and wear-part comparison",
      "rows": [
        [
          "Georg Fischer legacy wheel",
          "Cast wear parts. Throwing blades are retained from the rear with special revolving spacers; replacement requires more effort. Different arrangements for both rotation directions increase the number of stocked wear parts."
        ],
        [
          "TITAN 15 / TITAN 17",
          "Hardened tool-steel wear parts. Plug-in blades do not require additional fixing elements, shortening blade-change work; clamp-plug connections simplify maintenance."
        ],
        [
          "TITAN SMART",
          "Hardened tool-steel system with stated wear life approximately 10% longer than the compared GF wheels. Plug-in blades and simple clamp-plug connections support shorter maintenance interventions."
        ]
      ]
    },
    {
      "heading": "Upgrade decision",
      "paragraphs": [
        "Evaluate the upgrade against current abrasive consumption, motor energy, maintenance hours, spare-parts inventory and lost production during wheel service. A replacement wheel can improve process stability only when its output, mounting and blast pattern are matched to the machine and workpiece.",
        "Confirm whether a direct mechanical swap is available for the exact machine configuration. Establish baseline blast coverage and surface result before conversion so the post-upgrade result can be measured rather than assumed."
      ]
    },
    {
      "heading": "Inspection and safety",
      "paragraphs": [
        "Inspect blades, control cage, impeller, hub, feed spout and surrounding liners at planned intervals. Replace coordinated wear sets when uneven wear could disturb balance or blast distribution.",
        "Lock out electrical and mechanical energy and fully stop the wheel before opening the blast chamber. Use lifting and handling methods suited to heavy wheel components, and verify rotation direction before returning the system to production."
      ]
    }
  ],
  "updated_at": "2026-10-14"
}