{
  "title": "Microclear DS Aluminum Oxide Polishing Slurry Series",
  "kind": "reference",
  "company": "Micro Abrasives Corporation",
  "category": "Compounds & slurries",
  "parameters": {
    "Series": "Microclear DS",
    "Material": "Aluminum oxide polishing slurry",
    "Typical solids": "37.5–38.5%",
    "Typical pH": "9.2",
    "Grades": "DS .5, DS1, DS2, DS6, DS8 and DS10/12"
  },
  "summary": "Microclear DS is a water-based aluminum oxide polishing slurry family supplied at 37.5–38.5% solids. Six listed size grades extend from 0.9 µm to 10 µm average particle size, with typical pH 9.2 and alpha-alumina content of 80–90%.",
  "sections": [
    {
      "heading": "Material and supply form",
      "paragraphs": [
        "The DS series is a wet-milled polishing alumina supplied as a water-based white slurry. Calcination is controlled by surface-area specification, with standard and high surface-area versions described for different polishing responses.",
        "The slurry form reduces the need to disperse a dry powder at the point of use. Solids, particle distribution and surface area remain key inputs to removal rate and finish."
      ]
    },
    {
      "heading": "Typical properties",
      "rows": [
        [
          "DS .5 average particle size",
          "0.9 µm"
        ],
        [
          "DS1 average particle size",
          "1.5 µm"
        ],
        [
          "DS2 average particle size",
          "2.3 µm"
        ],
        [
          "DS6 average particle size",
          "6.0 µm"
        ],
        [
          "DS8 average particle size",
          "8.2 µm"
        ],
        [
          "DS10/12 average particle size",
          "10 µm"
        ],
        [
          "Solids",
          "37.5–38.5%"
        ],
        [
          "pH",
          "9.2"
        ],
        [
          "Alpha alumina",
          "80–90%"
        ]
      ]
    },
    {
      "heading": "Applications",
      "items": [
        "Automotive clear-coat finishing",
        "Marine surface polishing",
        "Chrome, aluminium and stainless-steel finishing",
        "Plastic and acrylic polishing"
      ]
    },
    {
      "heading": "Process and storage controls",
      "paragraphs": [
        "Typical values are guidance, not finished-process guarantees. Confirm grade, surface-area version and any requested special chemistry before qualification. Maintain slurry homogeneity during storage and use, prevent contamination, and validate removal rate, gloss, residue and scratch pattern on representative workpieces."
      ]
    }
  ],
  "updated_at": "2026-10-12 19:37:09"
}