{
  "title": "Microgrit PXA Unfused Aluminum Oxide Powder Series",
  "kind": "reference",
  "company": "Micro Abrasives Corporation",
  "category": "Abrasive grains & powders",
  "parameters": {
    "Series": "Microgrit PXA",
    "Material": "Unfused aluminum oxide",
    "Listed grades": "PXA #101, #101H, #102, #103, #201, #301, #401 and #411",
    "Average particle-size span": "0.75–5.0 µm across listed grades"
  },
  "summary": "Microgrit PXA is a family of unfused aluminum oxide powders for polishing and buffing compositions, tumbling creams and lapping compounds. Eight listed grades vary by absorption figure and average particle size, spanning nominal averages from 0.75 µm to 5.0 µm.",
  "sections": [
    {
      "heading": "Series construction",
      "paragraphs": [
        "The PXA series uses unfused aluminum oxide prepared in ceramic-lined equipment to reduce metal contamination. Particle size and absorptive behaviour are controlled so formulators can select a grade for cutting, colouring or fine finishing.",
        "The powders are intended for incorporation into polishing and buffing compositions, tumbling creams and lapping compounds. They are also described for wet or dry tumbling and for metallographic or crystallographic specimen finishing."
      ]
    },
    {
      "heading": "Grade comparison",
      "rows": [
        [
          "PXA #101",
          "Absorption 23.0; average 2.5 µm; listed range 1–8 µm"
        ],
        [
          "PXA #101H",
          "Absorption 23.5; average 2.0 µm; listed range 1–6 µm"
        ],
        [
          "PXA #102",
          "Absorption 22.0; average 3.0 µm; listed range 1–10 µm"
        ],
        [
          "PXA #103",
          "Absorption 21.5; average 2.5 µm; listed range 1–8 µm"
        ],
        [
          "PXA #201",
          "Absorption 19.5; average 5.0 µm; listed range 2–10 µm"
        ],
        [
          "PXA #301",
          "Absorption 24.5; average 1.5 µm"
        ],
        [
          "PXA #401",
          "Absorption 25.5; average 1.0 µm"
        ],
        [
          "PXA #411",
          "Absorption 26.0; average 0.75 µm"
        ]
      ]
    },
    {
      "heading": "Application positioning",
      "items": [
        "PXA #101 and #101H for colour-oriented formulations",
        "PXA #102 and #103 for general chrome rouge compositions",
        "PXA #201 for stainless cut-and-colour work",
        "PXA #301 and #401 for progressively finer chrome colouring",
        "PXA #411 for fine chrome colouring and marble polishing"
      ]
    },
    {
      "heading": "Formulation and validation",
      "paragraphs": [
        "Absorption and particle-size values are selection inputs, not finished-process guarantees. Final cut, colour, dispersion stability and residue depend on binder or carrier chemistry, abrasive loading, contact media and machine conditions. Validate the formulation on the actual substrate before production release."
      ]
    }
  ],
  "updated_at": "2026-10-12 19:31:50"
}