{
  "title": "Microgrit WCA Platelet Alumina Powder Series",
  "kind": "reference",
  "company": "Micro Abrasives Corporation",
  "category": "Abrasive grains & powders",
  "parameters": {
    "Series": "Microgrit WCA",
    "Material": "Alumina powder",
    "Stated hardness": "",
    "Stated purity": "Above 99%",
    "Particle shape": "Platelet crystal with smooth surface"
  },
  "summary": "Microgrit WCA is a high-purity platelet alumina powder for precision surface finishing. Its discrete crystals are stated above 99% purity with a 5:1 aspect ratio, smooth surfaces and high fracture resistance, supporting lapping and polishing with controlled contact pressure and reduced abrasive loading.",
  "sections": [
    {
      "heading": "Particle architecture",
      "paragraphs": [
        "WCA consists of discrete alumina crystals with smooth platelet surfaces and a stated aspect ratio of 5:1. The platelets orient parallel to the lap and work surface, spreading pressure over a wider contact area than a more equiaxed abrasive.",
        "High resistance to fracture is intended to prolong abrasive life, while uniform particle quality is used to reduce random scratching and subsurface damage in precision finishing."
      ]
    },
    {
      "heading": "Documented process positioning",
      "rows": [
        [
          "Purity",
          "Above 99% alumina"
        ],
        [
          "Aspect ratio",
          "5:1"
        ],
        [
          "Suggested WCA slurry loading",
          "15–20% abrasive-to-vehicle ratio"
        ],
        [
          "Typical fused-alumina comparison",
          "30–50% abrasive-to-vehicle ratio"
        ],
        [
          "Manufacturing route",
          "Hydraulic classification"
        ]
      ]
    },
    {
      "heading": "Application range",
      "items": [
        "Precision optics, optical glass, quartz and germanium",
        "Piezo-electronic and semiconductor materials",
        "Precision bearings and lapping operations",
        "Buffing compounds for stainless and hardened steels",
        "Ferrous, non-ferrous and mineral surfaces"
      ]
    },
    {
      "heading": "Slurry control",
      "paragraphs": [
        "Suspension treatment and loading must be matched to the vehicle, settling tolerance and required finish. The stated loading comparison is process guidance, not a universal recipe. Validate removal rate, subsurface damage, scratching and slurry stability with the selected grade and actual workpiece."
      ]
    }
  ],
  "updated_at": "2026-10-12 19:34:41"
}