{
  "title": "PSG Series | Almatis",
  "kind": "reference",
  "company": "Almatis",
  "category": "Abrasive grains & powders",
  "parameters": {},
  "summary": "The Almatis PSG-Series uses hard, low-surface-area calcined alumina with tightly controlled calcination and particle-size distribution for very heavy cutting and surface preparation. PSG 100 and PSG 200 are both listed with a 200 µm top cut and are intended for high-friction, high-removal polishing compounds.",
  "sections": [
    {
      "heading": "Heavy-cut abrasive",
      "paragraphs": [
        "PSG is designed for robust polishing stages where rapid material removal is required. Its hard calcined structure and low surface area support high friction and cutting action, while particle-size control limits variation between batches.",
        "Both PSG 100 and PSG 200 are described with a 200 µm top cut. Because the public family description does not state every differentiating property, they should not be treated as interchangeable without checking the grade-specific product data."
      ]
    },
    {
      "heading": "Published grade facts",
      "rows": [
        [
          "PSG 100",
          "Calcined alumina; 200 µm top cut; very heavy cutting compound duty"
        ],
        [
          "PSG 200",
          "Calcined alumina; 200 µm top cut; very heavy cutting compound duty"
        ]
      ]
    },
    {
      "heading": "Where it fits",
      "paragraphs": [
        "PSG is a preparation abrasive rather than a final-polish default. It is suited to compounds that must remove pronounced defects or establish geometry before a finer stage.",
        "High friction raises the importance of temperature control, pad condition and lubricant or carrier selection. Excess heat or an overloaded interface can change the cut pattern and make a nominally stable abrasive process inconsistent."
      ]
    },
    {
      "heading": "Qualification checks",
      "items": [
        "Verify the full particle-size distribution, not only the 200 µm top cut.",
        "Compare PSG 100 and PSG 200 using the grade data supplied for the actual lot.",
        "Monitor interface temperature and compound loading during trials.",
        "Use containment and suitable dust controls when charging dry powder."
      ]
    }
  ],
  "updated_at": "2026-10-12"
}