{
  "title": "TR Series | Almatis",
  "kind": "reference",
  "company": "Almatis",
  "category": "Abrasive grains & powders",
  "parameters": {},
  "summary": "The Almatis TR family provides crystalline-silica-free polishing aluminas for ferrous and non-ferrous metals. TR 140 is the more abrasive, higher-cut grade, while TR 150 is tuned for a balanced cut and finish.",
  "sections": [
    {
      "heading": "Metal-polishing role",
      "paragraphs": [
        "TR grades are intended for industrial polishing of both ferrous and non-ferrous substrates. Their defining formulation feature is the absence of crystalline silica, while the two grades provide different cut-to-finish balances.",
        "TR 140 is the higher-cut option. TR 150 moderates cutting action to give a more balanced finish, making it the logical comparison grade when a single operation must both remove marks and refine the surface."
      ]
    },
    {
      "heading": "Grade comparison",
      "rows": [
        [
          "TR 140",
          "Crystalline-silica-free; increased abrasiveness and higher cutting"
        ],
        [
          "TR 150",
          "Crystalline-silica-free; balanced cut and finish"
        ]
      ]
    },
    {
      "heading": "Process selection",
      "paragraphs": [
        "The absence of crystalline silica does not make an airborne powder process hazard-free. Alumina dust, carrier ingredients and the substrate itself still require an exposure assessment and effective ventilation.",
        "For metal trials, document alloy, initial roughness, tool or pad, surface speed, pressure, compound dose and cycle time. A result on one alloy should not be transferred to another without confirmation."
      ]
    },
    {
      "heading": "Operational controls",
      "items": [
        "Select TR 140 when removal rate is the priority and TR 150 when finish balance is more important.",
        "Verify compound compatibility with the metal and any downstream cleaning or coating.",
        "Use local extraction and protective measures appropriate to the actual mixture and process.",
        "Measure surface finish and temperature during qualification."
      ]
    }
  ],
  "updated_at": "2026-10-12"
}