Alumina Suspension - 0.3 & 1 Microns, De-Agglomerated

Refer to the original PDF for tables, figures and page layout.

Page 1
 
Page 1/6
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
59.1.0
* 1 Identification
· Product name: Alumina Polishing Suspension, De-agglomerated, 0.3 & 1.0 micron
· Part number: 90-187510, 90-187545, 90-187580, 90-187515, 90-187550, 90-187585
· Application of the substance / the mixture Polishing solution
· Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
Allied High Tech Products Inc.
16207 Carmenita Road
USA-Cerritos, CA, 90703
USA
info@alliedhightech.com
· Information department: Product safety department
· Emergency telephone number:
During normal opening times: +1 (310) 635-2466
Chemtrec: +1 (202) 483-7616
2 Hazard(s) identification
· Classification of the substance or mixture The product is not classified, according to the Globally Harmonized System (GHS).
· Label elements
· GHS label elements Void
· Hazard pictograms Void
· Signal word Void
· Hazard statements Void
3 Composition/information on ingredients
· Chemical characterization: Mixtures
· Description: Mixture of the substances listed below with nonhazardous additions.
· Hazardous components and components with occupational exposure limits:
1344-28-1 aluminium oxide
10-20%
· Non-hazardous components:
7732-18-5 water, distilled, conductivity or of similar purity
80-90%
· Additional information: The specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.
4 First-aid measures
· Description of first aid measures
· General information: No special measures required.
· After inhalation: Supply fresh air; consult doctor in case of complaints.
· After skin contact: Generally the product does not irritate the skin.
· After eye contact: Rinse opened eye for several minutes under running water.
· After swallowing: If symptoms persist consult doctor.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed Dermatitis
(Contd. on page 2)


Page 2
Page 2/6
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: Alumina Polishing Suspension, De-agglomerated, 0.3 & 1.0 micron
(Contd. of page 1)
59.1.0
· Indication of any immediate medical attention and special treatment needed No further relevant information available.
5 Fire-fighting measures
· Extinguishing media
· Suitable extinguishing agents: Use fire fighting measures that suit the environment.
· Special hazards arising from the substance or mixture No further relevant information available.
· Advice for firefighters
· Protective equipment: No special measures required.
6 Accidental release measures
· Personal precautions, protective equipment and emergency procedures Not required.
· Environmental precautions: No special measures required.
· Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
· Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
· Handling:
· Precautions for safe handling No special measures necessary.
· Information about protection against explosions and fires: No special measures required.
· Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles:
Store in a cool location.
No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions: None.
· Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
· Additional information about design of technical systems: No additional data. See 7.
· Control parameters
· Components with limit values that require monitoring at the workplace:
1344-28-1 aluminium oxide
PEL Long-term value: 15*; 5** mg/m³
*Total dust; ** Respirable fraction
REL Long-term value: 10* 5** mg/m³
as Al*Total dust**Respirable/pyro powd./welding f.
TLV Long-term value: 1* mg/m³
as Al; *as respirable fraction, A4
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures: The usual precautionary measures for handling chemicals should be followed.
· Breathing equipment:
Not required.
Use suitable respiratory protective device in case of insufficient ventilation.
· Protection of hands: Not required.
· Eye protection: Goggles recommended during refilling.
(Contd. on page 3)


Page 3
Page 3/6
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: Alumina Polishing Suspension, De-agglomerated, 0.3 & 1.0 micron
(Contd. of page 2)
59.1.0
9 Physical and chemical properties
· Information on basic physical and chemical properties
· General Information
· Appearance:
Form:
Suspension
Color:
Whitish
· Odor:
Odorless
· Odor threshold:
Not determined.
· pH-value at 20 °C (68 °F):
9 
· Change in condition
Melting point/Melting range:
0 °C (32 °F)
Boiling point/Boiling range:
100 °C (212 °F)
· Flash point:
Not applicable.
· Flammability (solid, gaseous):
Not applicable.
· Decomposition temperature:
Not determined.
· Ignition temperature:
Product is not selfigniting.
· Danger of explosion:
Product does not present an explosion hazard.
· Explosion limits:
Lower:
Not determined.
Upper:
Not determined.
· Vapor pressure:
Not determined.
· Density:
Not determined.
· Relative density
Not determined.
· Vapor density
Not determined.
· Specific gravity:
1.1-1.2 (Air = 1)
· Evaporation rate
Not determined.
· Solubility in / Miscibility with
Water:
Fully miscible.
· Partition coefficient (n-octanol/water): Not determined.
· Viscosity:
Dynamic:
Not determined.
Kinematic:
Not determined.
· Solvent content:
Water:
81.8 %
VOC content:
0.00 %
Solids content:
18.2 %
· Other information
No further relevant information available.
10 Stability and reactivity
· Reactivity No further relevant information available.
· Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
· Possibility of hazardous reactions No dangerous reactions known.
· Conditions to avoid Keep away from oxidising agents and acidic substances.
· Incompatible materials: No further relevant information available.
· Hazardous decomposition products: No dangerous decomposition products known.
(Contd. on page 4)


Page 4
Page 4/6
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: Alumina Polishing Suspension, De-agglomerated, 0.3 & 1.0 micron
(Contd. of page 3)
59.1.0
11 Toxicological information
· Information on toxicological effects
· Acute toxicity:
· LD/LC50 values that are relevant for classification:
1344-28-1 aluminium oxide
Oral LD50 >5,000 mg/kg (rat)
· Primary chemical irritant effect:
· on the skin: No irritant effect.
· on the eye: No irritating effect.
· Sensitization: No sensitizing effects known.
· Additional toxicological information:
Abrasive skin irritant
When used and handled according to specifications, the product does not have any harmful effects according to our experience and the
information provided to us.
· Carcinogenic categories
· IARC (International Agency for Research on Cancer)
None of the ingredients is listed.
· NTP (National Toxicology Program)
None of the ingredients is listed.
· OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12 Ecological information
· Toxicity
· Aquatic toxicity: No further relevant information available.
· Persistence and degradability No further relevant information available.
· Behavior in environmental systems:
· Bioaccumulative potential No further relevant information available.
· Mobility in soil No further relevant information available.
· Additional ecological information:
· General notes: Not hazardous for water.
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Other adverse effects No further relevant information available.
13 Disposal considerations
· Waste treatment methods
· Recommendation: Contact waste processors for recycling information.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.
· Recommended cleansing agent: Water, if necessary with cleansing agents.
14 Transport information
· UN-Number
· DOT, ADN, IMDG, IATA
not regulated
· UN proper shipping name
· DOT, ADN, IMDG, IATA
not regulated
(Contd. on page 5)


Page 5
Page 5/6
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: Alumina Polishing Suspension, De-agglomerated, 0.3 & 1.0 micron
(Contd. of page 4)
59.1.0
· Transport hazard class(es)
· DOT, ADN, IMDG, IATA
· Class
not regulated
· Packing group
· DOT, IMDG, IATA
not regulated
· Environmental hazards:
· Marine pollutant:
No
· Special precautions for user
Not applicable.
· Transport in bulk according to Annex II of MARPOL73/78 and
the IBC Code
Not applicable.
· UN "Model Regulation":
not regulated
15 Regulatory information
· Safety, health and environmental regulations/legislation specific for the substance or mixture
No further relevant information available.
· Sara
· Section 355 (extremely hazardous substances):
None of the ingredients is listed.
· Section 313 (Specific toxic chemical listings):
1344-28-1 aluminium oxide
· TSCA (Toxic Substances Control Act):
All components have the value ACTIVE.
· Hazardous Air Pollutants
None of the ingredients is listed.
· Proposition 65
· Chemicals known to cause cancer:
None of the ingredients is listed.
· Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
· Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
· Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
To the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties
and does not establish a contractual legal relationship.
· Department issuing SDS: Technical Services
· Contact: Pablo Mendoza
· Last revision / supersedes version: 06/01/2024 / 3.0
· Supersedes date: 12/01/2022
· Abbreviations and acronyms:
ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by
Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
EINECS: European Inventory of Existing Commercial Chemical Substances
(Contd. on page 6)


Page 6
Page 6/6
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 4.0
Product name: Alumina Polishing Suspension, De-agglomerated, 0.3 & 1.0 micron
(Contd. of page 5)
59.1.0
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
· * Data compared to the previous version altered.