EpoxyBond 14 Parts A & B

Refer to the original PDF for tables, figures and page layout.

Page 1
Page 1/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
59.1.0
* 1 Identification
· Product name: EpoxyBond 14 - Part A
· Part number: 71-10025
· Application of the substance / the mixture Adhesives
· Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
Allied High Tech Products Inc.
16207 Carmenita Road
USA-Cerritos, CA, 90703
USA
info@alliedhightech.com
· Information department: Product safety department
· Emergency telephone number:
During normal opening times: +1 (310) 635-2466
Chemtrec: +1 (202) 483-7616
2 Hazard(s) identification
· Classification of the substance or mixture
GHS05 Corrosion
Eye Damage 1
H318 Causes serious eye damage.
GHS09 Environment
Aquatic Chronic 2
H411 Toxic to aquatic life with long lasting effects.
GHS07
Acute Toxicity - Oral 4
H302 Harmful if swallowed.
Acute Toxicity - Dermal 4
H312 Harmful in contact with skin.
Acute Toxicity - Inhalation 4 H332 Harmful if inhaled.
Skin Irritation 2
H315 Causes skin irritation.
Sensitization - Skin 1
H317 May cause an allergic skin reaction.
· Label elements
· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2)


Page 2
Page 2/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part A
(Contd. of page 1)
59.1.0
· Hazard pictograms
GHS05
GHS07
GHS09
· Signal word Danger
· Hazard-determining components of labeling:
Reactive Diluent
1-Chloro-4 Trifluromethyl Bisphenol A Epoxy Resin
· Hazard statements
Harmful if swallowed, in contact with skin or if inhaled.
Causes skin irritation.
Causes serious eye damage.
May cause an allergic skin reaction.
Toxic to aquatic life with long lasting effects.
· Precautionary statements
Avoid breathing dust/fume/gas/mist/vapors/spray
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Use only outdoors or in a well-ventilated area.
Contaminated work clothing must not be allowed out of the workplace.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
If swallowed: Call a poison center/doctor if you feel unwell.
If on skin: Wash with plenty of water.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a poison center/doctor.
Specific treatment (see on this label).
Rinse mouth.
Take off contaminated clothing and wash it before reuse.
If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse.
Collect spillage.
Dispose of contents/container in accordance with local/regional/national/international regulations.
3 Composition/information on ingredients
· Chemical characterization: Mixtures
· Description: Mixture of the substances listed below with nonhazardous additions.
· Hazardous components and components with occupational exposure limits:
25085-99-8 1-Chloro-4 Trifluromethyl Bisphenol A Epoxy Resin
 Aquatic Chronic 2, H411;
 Skin Irritation 2, H315; Eye Irritation 2A, H319; Sensitization - Skin 1, H317
60-70%
Reactive Diluent
 Eye Damage 1, H318;
 Acute Toxicity - Oral 4, H302; Acute Toxicity - Dermal 4, H312; Acute Toxicity -
Inhalation 4, H332; Skin Irritation 2, H315; Sensitization - Skin 1, H317
30-40%
· Additional information: The specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.
4 First-aid measures
· Description of first aid measures
· General information:
Immediately remove any clothing soiled by the product.
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
(Contd. on page 3)


Page 3
Page 3/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part A
(Contd. of page 2)
59.1.0
· After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
· After skin contact: Immediately wash with water and soap and rinse thoroughly.
· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing: Immediately call a doctor.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed
Breathing difficulty
Coughing
Allergic reactions
Dermatitis
Eye irritation
· Indication of any immediate medical attention and special treatment needed No further relevant information available.
5 Fire-fighting measures
· Extinguishing media
· Suitable extinguishing agents:
Water spray
Foam
Use fire fighting measures that suit the environment.
· Special hazards arising from the substance or mixture No further relevant information available.
· Advice for firefighters
· Protective equipment: Mouth respiratory protective device.
6 Accidental release measures
· Personal precautions, protective equipment and emergency procedures Wear protective equipment. Keep unprotected persons away.
· Environmental precautions: Inform respective authorities in case of seepage into water course or sewage system.
· Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralizing agent.
Dispose contaminated material as waste according to section 13.
Ensure adequate ventilation.
· Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
· Handling:
· Precautions for safe handling
Ensure proper ventilation/exhaustion at workplaces.
Prevent formation of aerosols.
· Information about protection against explosions and fires: No special measures required.
· Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles: Store at room temperature.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions:
Keep receptacle tightly sealed.
Store receptacle in a well ventilated area.
· Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
· Additional information about design of technical systems: No additional data. See 7.
(Contd. on page 4)


Page 4
Page 4/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part A
(Contd. of page 3)
59.1.0
· Control parameters
· Components with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be monitored at the workplace.
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the skin.
Avoid contact with the eyes and skin.
· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves
Nitrile rubber, NBR
Neoprene gloves
Butyl rubber, BR
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer
to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance
and has therefore to be checked prior to the application.
· Eye protection:
Tightly sealed goggles
9 Physical and chemical properties
· Information on basic physical and chemical properties
· General Information
· Appearance:
Form:
Liquid
Color:
Colorless
· Odor:
Light
· Odor threshold:
Not determined.
· pH-value:
Not determined.
· Change in condition
Melting point/Melting range:
Undetermined.
Boiling point/Boiling range:
Undetermined.
· Flash point:
>110 °C (>230 °F)
· Flammability (solid, gaseous):
Not applicable.
· Decomposition temperature:
Not determined.
· Ignition temperature:
Product is not selfigniting.
· Danger of explosion:
Product does not present an explosion hazard.
(Contd. on page 5)


Page 5
Page 5/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part A
(Contd. of page 4)
59.1.0
· Explosion limits:
Lower:
Not determined.
Upper:
Not determined.
· Vapor pressure:
Not determined.
· Density:
Not determined.
· Relative density
Not determined.
· Vapor density
Not determined.
· Evaporation rate
<BuAc
· Solubility in / Miscibility with
Water:
Not miscible or difficult to mix.
· Partition coefficient (n-octanol/water): Not determined.
· Viscosity:
Dynamic:
Not determined.
Kinematic:
Not determined.
· Solvent content:
VOC content:
0.00 %
Solids content:
0.0 %
· Other information
No further relevant information available.
10 Stability and reactivity
· Reactivity No further relevant information available.
· Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
· Possibility of hazardous reactions No dangerous reactions known.
· Conditions to avoid
Keep away from oxidising agents and acidic substances.
Keep away from alkaline solutions.
Keep away from heat.
· Incompatible materials: No further relevant information available.
· Hazardous decomposition products: Carbon monoxide and carbon dioxide
· Additional information: Hazardous decomposition products may form during combustion.
11 Toxicological information
· Information on toxicological effects
· Acute toxicity:
· LD/LC50 values that are relevant for classification:
Oral
LD50
1,666.67 mg/kg (ATE)
Dermal
LD50
1,100 mg/kg (ATE)
Inhalative LC50/4 h >19 mg/l (ATE)
  25085-99-8 1-Chloro-4 Trifluromethyl Bisphenol A Epoxy Resin
Oral
LD50
15,000 mg/kg (rat)
Dermal
LD50
23,000 mg/kg (rabbit)
Reactive Diluent
Oral
LD50
1,163 mg/kg (rat)
Dermal
LD50
1,130 mg/kg (rabbit)
Inhalative LC50/4 h 11 mg/l (ATE)
(Contd. on page 6)


Page 6
Page 6/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part A
(Contd. of page 5)
59.1.0
· Primary chemical irritant effect:
· on the skin: Irritant to skin and mucous membranes.
· on the eye: Strong irritant with the danger of severe eye injury.
· Sensitization: Sensitization possible through skin contact.
· Additional toxicological information:
· Carcinogenic categories
· IARC (International Agency for Research on Cancer)
None of the ingredients is listed.
· NTP (National Toxicology Program)
None of the ingredients is listed.
· OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12 Ecological information
· Toxicity
· Aquatic toxicity: No further relevant information available.
· Persistence and degradability No further relevant information available.
· Behavior in environmental systems:
· Bioaccumulative potential No further relevant information available.
· Mobility in soil No further relevant information available.
· Ecotoxical effects:
· Remark: Toxic for fish
· Additional ecological information:
· General notes:
Water hazard class 2 (Self-assessment): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Must not reach bodies of water or drainage ditch undiluted or unneutralized.
Danger to drinking water if even small quantities leak into the ground.
Also poisonous for fish and plankton in water bodies.
Toxic for aquatic organisms
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Other adverse effects No further relevant information available.
13 Disposal considerations
· Waste treatment methods
· Recommendation: Contact waste processors for recycling information.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.
14 Transport information
· UN-Number
· DOT
not regulated
· IMDG, IATA
UN3082
· UN proper shipping name
· DOT
not regulated
· IMDG
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (1-Chloro-4 Trifluromethyl Bisphenol A Epoxy Resin),
MARINE POLLUTANT
(Contd. on page 7)


Page 7
Page 7/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part A
(Contd. of page 6)
59.1.0
· IATA
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, LIQUID,
N.O.S. (1-Chloro-4 Trifluromethyl Bisphenol A Epoxy Resin)
· Transport hazard class(es)
· DOT
· Class
not regulated
· IMDG, IATA
· Class
9 Miscellaneous dangerous substances and articles
· Label
9 
· Packing group
· DOT
not regulated
· IMDG, IATA
III
· Environmental hazards:
· Marine pollutant:
Symbol (fish and tree)
· Special marking (IATA):
Symbol (fish and tree)
· Special precautions for user
Warning: Miscellaneous dangerous substances and articles
· Hazard identification number (Kemler code):
90
· EMS Number:
F-A,S-F
· Stowage Category
A 
· Transport in bulk according to Annex II of MARPOL73/78 and
the IBC Code
Not applicable.
· Transport/Additional information:
· DOT
· Limited quantities (LQ)
5L
· Transport category
3 
· Tunnel restriction code
(-)
· IMDG
· Limited quantities (LQ)
5L
· Excepted quantities (EQ)
Code: E1
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 1000 ml
· UN "Model Regulation":
UN 3082 ENVIRONMENTALLY HAZARDOUS SUBSTANCE,
LIQUID, N.O.S. (1-CHLORO-4 TRIFLUROMETHYL BISPHENOL
A EPOXY RESIN), 9, III
15 Regulatory information
· Safety, health and environmental regulations/legislation specific for the substance or mixture
No further relevant information available.
· Sara
· Section 355 (extremely hazardous substances):
None of the ingredients is listed.
· Section 313 (Specific toxic chemical listings):
None of the ingredients is listed.
· TSCA (Toxic Substances Control Act):
All components have the value ACTIVE.
(Contd. on page 8)


Page 8
Page 8/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part A
(Contd. of page 7)
59.1.0
· Hazardous Air Pollutants
None of the ingredients is listed.
· Proposition 65
· Chemicals known to cause cancer:
None of the ingredients is listed.
· Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
· Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
· Chemicals known to cause developmental toxicity:
None of the ingredients is listed.
· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
To the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties
and does not establish a contractual legal relationship.
· Department issuing SDS: Technical Services
· Contact: Pablo Mendoza
· Last revision / supersedes version: 06/01/2024 / 2.0
· Supersedes date: 06/01/2022
· Abbreviations and acronyms:
ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by
Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Acute Toxicity - Oral 4: Acute toxicity – Category 4
Skin Irritation 2: Skin corrosion/irritation – Category 2
Eye Damage 1: Serious eye damage/eye irritation – Category 1
Eye Irritation 2A: Serious eye damage/eye irritation – Category 2A
Sensitization - Skin 1: Skin sensitisation – Category 1
Aquatic Chronic 2: Hazardous to the aquatic environment - long-term aquatic hazard – Category 2
· * Data compared to the previous version altered.   


Page 9
 
Page 1/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
59.1.0
* 1 Identification
· Product name: EpoxyBond 14 - Part B
· Part number: 71-10025
· CAS Number:
25513-64-8
· Application of the substance / the mixture Adhesives
· Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
Allied High Tech Products Inc.
16207 Carmenita Road
USA-Cerritos, CA, 90703
USA
info@alliedhightech.com
· Information department: Product safety department
· Emergency telephone number:
During normal opening times: +1 (310) 635-2466
Chemtrec: +1 (202) 483-7616
2 Hazard(s) identification
· Classification of the substance or mixture
GHS05 Corrosion
Skin Corrosion 1B
H314 Causes severe skin burns and eye damage.
Eye Damage 1
H318 Causes serious eye damage.
GHS07
Acute Toxicity - Oral 4 H302 Harmful if swallowed.
Sensitization - Skin 1
H317 May cause an allergic skin reaction.
Aquatic Chronic 3
H412 Harmful to aquatic life with long lasting effects.
· Label elements
· GHS label elements The substance is classified and labeled according to the Globally Harmonized System (GHS).
· Hazard pictograms
GHS05
GHS07
(Contd. on page 2)


Page 10
Page 2/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part B
(Contd. of page 1)
59.1.0
· Signal word Danger
· Hazard statements
Harmful if swallowed.
Causes severe skin burns and eye damage.
May cause an allergic skin reaction.
Harmful to aquatic life with long lasting effects.
· Precautionary statements
Do not breathe dusts or mists.
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Contaminated work clothing must not be allowed out of the workplace.
Avoid release to the environment.
Wear protective gloves/protective clothing/eye protection/face protection.
If swallowed: Call a poison center/doctor if you feel unwell.
If swallowed: Rinse mouth. Do NOT induce vomiting.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Immediately call a poison center/doctor.
Specific treatment (see on this label).
If skin irritation or rash occurs: Get medical advice/attention.
Wash contaminated clothing before reuse.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
3 Composition/information on ingredients
· Chemical characterization: Substances
· CAS No. Description
25513-64-8 3,3,5-trimethylhexamethylene-diamine
4 First-aid measures
· Description of first aid measures
· General information:
Immediately remove any clothing soiled by the product.
Symptoms of poisoning may even occur after several hours; therefore medical observation for at least 48 hours after the accident.
· After inhalation:
Supply fresh air and to be sure call for a doctor.
In case of unconsciousness place patient stably in side position for transportation.
· After skin contact: Immediately wash with water and soap and rinse thoroughly.
· After eye contact: Rinse opened eye for several minutes under running water. Then consult a doctor.
· After swallowing:
Immediately call a doctor.
Drink copious amounts of water and provide fresh air. Immediately call a doctor.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed
Thermal burns
Breathing difficulty
Coughing
Allergic reactions
Dermatitis
Eye irritation
· Indication of any immediate medical attention and special treatment needed No further relevant information available.
(Contd. on page 3)


Page 11
Page 3/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part B
(Contd. of page 2)
59.1.0
5 Fire-fighting measures
· Extinguishing media
· Suitable extinguishing agents:
Foam
Water spray
Use fire fighting measures that suit the environment.
· Special hazards arising from the substance or mixture During heating or in case of fire poisonous gases are produced.
· Advice for firefighters
· Protective equipment: Wear fully protective suit.
6 Accidental release measures
· Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Keep away from ignition sources
· Environmental precautions:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
· Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Use neutralizing agent.
Dispose contaminated material as waste according to section 13.
Ensure adequate ventilation.
· Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
· Handling:
· Precautions for safe handling
Ensure proper ventilation/exhaustion at workplaces.
Prevent formation of aerosols.
· Information about protection against explosions and fires: No special measures required.
· Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles: Store at room temperature.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions:
Keep receptacle tightly sealed.
Store receptacle in a well ventilated area.
· Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
· Additional information about design of technical systems: No additional data. See 7.
· Control parameters
· Components with limit values that require monitoring at the workplace: Not required.
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Avoid contact with the eyes.
(Contd. on page 4)


Page 12
Page 4/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part B
(Contd. of page 3)
59.1.0
Avoid contact with the eyes and skin.
· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves
Butyl rubber, BR
Nitrile rubber, NBR
Neoprene gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer
to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance
and has therefore to be checked prior to the application.
· Eye protection:
Tightly sealed goggles
9 Physical and chemical properties
· Information on basic physical and chemical properties
· General Information
· Appearance:
Form:
Liquid
Color:
Clear
· Odor:
Amine-like
· Odor threshold:
Not determined.
· pH-value:
Not determined.
· Change in condition
Melting point/Melting range:
Undetermined.
Boiling point/Boiling range:
Undetermined.
· Flash point:
>104 °C (>219.2 °F)
· Flammability (solid, gaseous):
Not applicable.
· Decomposition temperature:
Not determined.
· Ignition temperature:
Not determined.
· Danger of explosion:
Product does not present an explosion hazard.
· Explosion limits:
Lower:
Not determined.
Upper:
Not determined.
· Vapor pressure:
Not determined.
· Density:
Not determined.
· Relative density
Not determined.
· Vapor density
Not determined.
· Evaporation rate
<BuAc
· Solubility in / Miscibility with
Water:
Fully miscible.
(Contd. on page 5)


Page 13
Page 5/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part B
(Contd. of page 4)
59.1.0
· Partition coefficient (n-octanol/water): Not determined.
· Viscosity:
Dynamic:
Not determined.
Kinematic:
Not determined.
VOC content:
0.00 %
Solids content:
0.0 %
· Other information
No further relevant information available.
10 Stability and reactivity
· Reactivity No further relevant information available.
· Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
· Possibility of hazardous reactions No dangerous reactions known.
· Conditions to avoid
Keep away from heat.
Keep away from alkaline solutions.
Keep away from oxidising agents and acidic substances.
· Incompatible materials: No further relevant information available.
· Hazardous decomposition products:
Carbon monoxide and carbon dioxide
Ammonia
· Additional information: Hazardous decomposition products may form during combustion.
11 Toxicological information
· Information on toxicological effects
· Acute toxicity:
· LD/LC50 values that are relevant for classification:
Oral LD50 500 mg/kg (ATE)
· Primary chemical irritant effect:
· on the skin: Caustic effect on skin and mucous membranes.
· on the eye:
Strong caustic effect.
Strong irritant with the danger of severe eye injury.
· Sensitization: Sensitization possible through skin contact.
· Additional toxicological information:
Swallowing will lead to a strong caustic effect on mouth and throat and to the danger of perforation of esophagus and stomach.
· Carcinogenic categories
· IARC (International Agency for Research on Cancer)
Substance is not listed.
· NTP (National Toxicology Program)
Substance is not listed.
· OSHA-Ca (Occupational Safety & Health Administration)
Substance is not listed.
12 Ecological information
· Toxicity
· Aquatic toxicity: No further relevant information available.
· Persistence and degradability biodegradable
· Behavior in environmental systems:
· Bioaccumulative potential Does not accumulate in organisms
(Contd. on page 6)


Page 14
Page 6/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part B
(Contd. of page 5)
59.1.0
· Mobility in soil Potential for mobility in soil is very high.
· Ecotoxical effects:
· Remark: Harmful to fish
· Additional ecological information:
· General notes:
Water hazard class 2 (Assessment by list): hazardous for water
Do not allow product to reach ground water, water course or sewage system.
Must not reach bodies of water or drainage ditch undiluted or unneutralized.
Danger to drinking water if even small quantities leak into the ground.
Harmful to aquatic organisms
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Other adverse effects No further relevant information available.
13 Disposal considerations
· Waste treatment methods
· Recommendation: Contact waste processors for recycling information.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.
· Recommended cleansing agent: Water, if necessary with cleansing agents.
14 Transport information
· UN-Number
· DOT, IMDG, IATA
UN2327
· UN proper shipping name
· DOT
Trimethylhexamethylenediamines
· IMDG, IATA
TRIMETHYLHEXAMETHYLENEDIAMINES
· Transport hazard class(es)
· DOT
· Class
8 Corrosive substances
· Label
8 
· IMDG, IATA
· Class
8 Corrosive substances
· Label
8 
· Packing group
· DOT, IMDG, IATA
III
· Environmental hazards:
Not applicable.
· Special precautions for user
Warning: Corrosive substances
· Hazard identification number (Kemler code):
80
· EMS Number:
F-A,S-B
· Stowage Category
A 
(Contd. on page 7)


Page 15
Page 7/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part B
(Contd. of page 6)
59.1.0
· Segregation Code
SG35 Stow "separated from" acids.
· Transport in bulk according to Annex II of MARPOL73/78 and
the IBC Code
Not applicable.
· Transport/Additional information:
· DOT
· Quantity limitations
On passenger aircraft/rail: 5 L
On cargo aircraft only: 60 L
· Limited quantities (LQ)
5L
· Transport category
3 
· Tunnel restriction code
E 
· IMDG
· Limited quantities (LQ)
5L
· Excepted quantities (EQ)
Code: E1
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 1000 ml
· UN "Model Regulation":
UN 2327 TRIMETHYLHEXAMETHYLENEDIAMINES, 8, III
15 Regulatory information
· Safety, health and environmental regulations/legislation specific for the substance or mixture
No further relevant information available.
· Sara
· Section 355 (extremely hazardous substances):
Substance is not listed.
· Section 313 (Specific toxic chemical listings):
Substance is not listed.
· TSCA (Toxic Substances Control Act):
ACTIVE
· Hazardous Air Pollutants
Substance is not listed.
· Proposition 65
· Chemicals known to cause cancer:
Substance is not listed.
· Chemicals known to cause reproductive toxicity for females:
Substance is not listed.
· Chemicals known to cause reproductive toxicity for males:
Substance is not listed.
· Chemicals known to cause developmental toxicity:
Substance is not listed.
· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
To the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties
and does not establish a contractual legal relationship.
· Department issuing SDS: Technical Services
· Contact: Pablo Mendoza
· Last revision / supersedes version: 06/01/2024 / 2.0
· Supersedes date: 06/01/2022
· Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
(Contd. on page 8)


Page 16
Page 8/8
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/03/2024
Last revision 06/01/2024
Version 3.0
Product name: EpoxyBond 14 - Part B
(Contd. of page 7)
59.1.0
DOT: US Department of Transportation
IATA: International Air Transport Association
CAS: Chemical Abstracts Service (division of the American Chemical Society)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
Acute Toxicity - Oral 4: Acute toxicity – Category 4
Skin Corrosion 1B: Skin corrosion/irritation – Category 1B
Eye Damage 1: Serious eye damage/eye irritation – Category 1
Sensitization - Skin 1: Skin sensitisation – Category 1
Aquatic Chronic 3: Hazardous to the aquatic environment - long-term aquatic hazard – Category 3
· * Data compared to the previous version altered.