Magnetic Fastening Base Use & Care Instructions

Refer to the original PDF for tables, figures and page layout.

Page 1
 
 
Product Guide 
www.alliedhightech.com 
Allied High Tech Products, Inc. 
Call for more information: 800.675.1118 
Magnetic Base 
Date: 06/2020, v1.1 
Adhesive back magnetic bases adhere to 
standard platens, allowing magnetic system 
cloths, abrasive discs or ferromagnetic discs 
to be utilized. 
 
Size 
Item Number 
8" (203 mm) 
90-208300 
10" (254 mm) 
90-208302 
12" (305 mm) 
90-208305 
 
Instructions 
1. Clean the platen surface with acetone or isopropyl alcohol to remove any dirt or 
debris. 
2. Remove the lining from the adhesive back and carefully apply the magnetic base 
to the plate. Press firmly to ensure that no bubbles form between the magnetic 
base and the platen surface. 
3. The platen and magnetic base are now ready to use with any magnetic system 
cloths, abrasive discs or ferromagnetic discs.  
4. To remove the magnetic base, lift the edge of the base until it completely 
separates from the platen. 
 
Maintenance 
Periodically wipe the magnetic base clean to remove abrasive particles and suspensions. 
It can also be rinsed with water until it is clean; dry the base with clean air or a lint-free 
wipe. 
Replace the magnetic base if it shows signs of wear, such as deep gouges, 
demagnetization, corrosion, nonuniformity due to overuse in one area or loss of 
adhesion between the base and platen.