Product & technical reference
Microgrit CEO cerium oxide polishing family
Technical family reference for Micro Abrasives CEO cerium-oxide powders and Microclear CEO slurries. It separates powder families, high-purity grades and ready-to-use slurry grades, and treats all reported values as average production-lot properties rather than guaranteed specifications.
Technical profile
| Manufacturer / publisher | Micro Abrasives Corporation |
|---|---|
| Record type | Product-family technical reference |
| Abrasive chemistry | Cerium oxide |
| Available forms | Powders, compounds and formulated slurries |
| CEO #1–#5 particle-size span | 1–12 µm across the family |
| High-purity powder grades | CEO 1000, CEO 2000, CEO 1000ST, CEO 200ST |
| High-purity powder reported CeO₂ content | 95% or 99% |
| Slurry grades | Microclear CEO 48 and Microclear CEO 24 |
| Slurry pH range | 6.0–8.0 |
| Slurry reported CeO₂ purity | 99% |
| Property status | Average commercial-lot values; not guaranteed specifications |
| Category | Abrasive grains & powders |
| Updated | 2026-10-12 20:37:29 |
CEO #1–#5 powder comparison
The five general-purpose CEO powders span different particle distributions, pH ranges and cerium-oxide contents. The speed labels below are comparative family labels, not a process guarantee.
| CEO #1 | 1–10 µm range; 2 µm average; pH 7.0–8.0; REO 68%; CeO₂ 53%; medium-high speed |
|---|---|
| CEO #2 | 1–8 µm range; 1.5 µm average; pH 6.0–7.5; REO 70%; CeO₂ 55%; medium speed |
| CEO #3 | 1–12 µm range; 3 µm average; pH 7.5–8.5; REO 67%; CeO₂ 52%; high speed |
| CEO #4 | 1–8 µm range; 1.5 µm average; pH 6.5–7.5; REO 60%; CeO₂ 48%; medium speed |
| CEO #5 | 1–10 µm range; 2 µm average; pH 6.5–7.5; REO 50%; CeO₂ 40%; low speed |
High-purity powder grades
These grades target superfinishing. ST grades use the lower reported pH band.
| CEO 1000 | <5 µm range; 0.5 µm average; pH 5.0–6.2; CeO₂ 99% |
|---|---|
| CEO 2000 | <6 µm range; 1.5 µm average; pH 5.0–6.2; CeO₂ 99% |
| CEO 1000ST | <5 µm range; 0.5 µm average; pH 3.0–4.2; CeO₂ 95% |
| CEO 200ST | <6 µm range; 1.5 µm average; pH 3.0–4.2; CeO₂ 95% |
Microclear CEO slurry grades
Both slurry grades are intended for precision polishing of optical glass, crystal and quartz where low roughness and high surface quality are required.
| Microclear CEO 48 | Particle range ≤5 µm; average ≤0.5 µm; pH 6.0–8.0; CeO₂ purity 99% |
|---|---|
| Microclear CEO 24 | Particle range ≤10 µm; average ≤1 µm; pH 6.0–8.0; CeO₂ purity 99% |
Selection notes
- Use particle distribution and comparative removal speed to screen powder grades.
- Use the reported pH band to check compatibility with the work material, carrier and equipment.
- Validate finish, removal rate and residue behavior on the actual substrate before production release.
- The family is described for ophthalmic work, precision optics, flat glass, crystals and cosmetic polishing; a grade-to-application mapping should be confirmed by trials.
Files & downloads
ceo-micro-abrasives-corp-9115ad0003bed7d4.html ↓ ceo-micro-abrasives-corp-9115ad0003bed7d4.json ↓Related products & technical information
Product & technical referenceMicro Abrasives Corporation↗Product & technical referenceMicro Abrasives Corporation↗Product & technical referenceMicro Abrasives Corporation↗Product & technical referenceMicro Abrasives Corporation↗Product & technical referenceMicro Abrasives Corporation↗
Microclear polishing alumina family
P01 · 2026-10-12
Microclear Supreme Aluminum Oxide Polishing Powder Series
P01 · 2026-10-12
Microclear DD Aluminum Oxide Polishing Powder Series
P01 · 2026-10-12
Microgrit SIC Silicon Carbide Abrasive Series
P01 · 2026-10-12
Microgrit WCA Platelet Alumina Powder Series
P01 · 2026-10-12