ULTIMATE-Series | Almatis
The Almatis ULTIMATE family is a premium group of polishing aluminas engineered for very high cut rates, high gloss and low surface roughness in a single step. Featured grades include P815, P1500 and P1820.
Technical profile
| Manufacturer / publisher | Almatis |
|---|---|
| Category | Abrasive grains & powders |
| Updated | 2026-10-12 |
High-demand positioning
ULTIMATE grades are intended for processes that need strong cutting action without accepting a separate coarse scratch pattern as the final result. Their grain structure is designed to combine high removal with low roughness and high gloss.
This makes the series relevant when cycle consolidation is valuable, but a one-step claim must still be qualified on the actual substrate, tool and carrier system.
Featured grades
| P815 | High-end alumina grade for high cut and gloss |
|---|---|
| P1500 | High-end alumina grade for high cut and gloss |
| P1820 | High-end alumina grade for high cut and gloss |
Qualification method
The family page identifies the featured grades and common performance objective but does not publish a complete side-by-side particle specification. Selection should compare grade-specific data and controlled test results rather than inferring performance from the numeric grade name.
Track removal rate, roughness, haze or gloss, temperature and cycle time. A grade is only process-efficient if it reaches the finish target without creating rework in cleaning or inspection.
Process controls
- Use identical tools, loading and dwell time for grade comparisons.
- Inspect for isolated deep scratches that average roughness may hide.
- Control contamination between development trials.
- Confirm powder handling and mixture safety requirements before scale-up.