BlueLube Polishing Lubricant1(US)

Refer to the original PDF for tables, figures and page layout.

Page 1
 
Page 1/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 5.0
59.1.0
* 1 Identification
· Product name: BlueLube Polishing Lubricant
· Part number: 90-205995  -  90-206010
· Application of the substance / the mixture Lubricant
· Details of the supplier of the safety data sheet
· Manufacturer/Supplier:
Allied High Tech Products Inc.
16207 Carmenita Road
USA-Cerritos, CA, 90703
USA
info@alliedhightech.com
· Information department: Product safety department
· Emergency telephone number:
During normal opening times: +1 (310) 635-2466
Chemtrec: +1 (202) 483-7616
2 Hazard(s) identification
· Classification of the substance or mixture
GHS02 Flame
Flammable Liquids 3
H226 Flammable liquid and vapor.
GHS08 Health hazard
Carcinogenicity 2
H351 Suspected of causing cancer.
Specific Target Organ Toxicity - Single Exposure 1 H370 Causes damage to the central nervous system and the eyes.
GHS07
Eye Irritation 2A
H319 Causes serious eye irritation.
Specific Target Organ Toxicity - Single Exposure 3 H336 May cause drowsiness or dizziness.
· Label elements
· GHS label elements The product is classified and labeled according to the Globally Harmonized System (GHS).
(Contd. on page 2)


Page 2
Page 2/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 5.0
Product name: BlueLube Polishing Lubricant
(Contd. of page 1)
59.1.0
· Hazard pictograms
GHS02
GHS07
GHS08
· Signal word Danger
· Hazard-determining components of labeling:
isopropyl alcohol
methyl isobutyl ketone
methyl alcohol
· Hazard statements
Flammable liquid and vapor.
Causes serious eye irritation.
Suspected of causing cancer.
Causes damage to the central nervous system and the eyes.
May cause drowsiness or dizziness.
· Precautionary statements
Obtain special instructions before use.
Do not handle until all safety precautions have been read and understood.
Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
Ground/bond container and receiving equipment.
Use explosion-proof electrical/ventilating/lighting/equipment.
Use only non-sparking tools.
Take precautionary measures against static discharge.
Do not breathe dust/fume/gas/mist/vapors/spray.
Wash thoroughly after handling.
Do not eat, drink or smoke when using this product.
Use only outdoors or in a well-ventilated area.
Wear protective gloves/protective clothing/eye protection/face protection.
If on skin (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
IF INHALED: Remove person to fresh air and keep comfortable for breathing.
If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
IF exposed or concerned: Get medical advice/attention.
Call a poison center/doctor if you feel unwell.
Specific treatment (see on this label).
If eye irritation persists: Get medical advice/attention.
In case of fire: Use CO2, powder or water spray to extinguish.
Store in a well-ventilated place. Keep container tightly closed.
Store in a well-ventilated place. Keep cool.
Store locked up.
Dispose of contents/container in accordance with local/regional/national/international regulations.
3 Composition/information on ingredients
· Chemical characterization: Mixtures
· Description: Mixture of the substances listed below with nonhazardous additions.
· Hazardous components and components with occupational exposure limits:
64-17-5 ethyl alcohol
 Flammable Liquids 2, H225
50-60%
67-63-0 isopropyl alcohol
 Flammable Liquids 2, H225;
 Eye Irritation 2A, H319; Specific Target Organ Toxicity - Single Exposure 3,
H336
20-30%
(Contd. on page 3)


Page 3
Page 3/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 5.0
Product name: BlueLube Polishing Lubricant
(Contd. of page 2)
59.1.0
57-55-6 propylene glycol
10-20%
67-56-1 methyl alcohol
 Flammable Liquids 2, H225;
 Acute Toxicity - Oral 3, H301; Acute Toxicity - Dermal 3, H311; Acute Toxicity -
Inhalation 3, H331;
 Specific Target Organ Toxicity - Single Exposure 1, H370
3-<5%
108-10-1 methyl isobutyl ketone
 Flammable Liquids 2, H225;
 Carcinogenicity 2, H351;
 Acute Toxicity - Inhalation 4, H332; Eye Irritation
2A, H319; Specific Target Organ Toxicity - Single Exposure 3, H336
1-5%
· Non-hazardous components:
7732-18-5 water, distilled, conductivity or of similar purity
1-5%
· Additional information:
Water is a byproduct of ethyl alcohol.
The specific chemical identity and/or exact percentage of the composition has been withheld as a trade secret.
4 First-aid measures
· Description of first aid measures
· General information: Immediately remove any clothing soiled by the product.
· After inhalation: Supply fresh air; consult doctor in case of complaints.
· After skin contact: Immediately rinse with water.
· After eye contact: Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
· After swallowing: If symptoms persist consult doctor.
· Information for doctor:
· Most important symptoms and effects, both acute and delayed
Blindness
Unconsciousness
Breathing difficulty
Headache
Dizziness
Coughing
Nausea
Eye irritation
· Indication of any immediate medical attention and special treatment needed No further relevant information available.
5 Fire-fighting measures
· Extinguishing media
· Suitable extinguishing agents: CO2, extinguishing powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
· For safety reasons unsuitable extinguishing agents: Water with full jet
· Special hazards arising from the substance or mixture During heating or in case of fire poisonous gases are produced.
· Advice for firefighters
· Protective equipment: Wear fully protective suit.
6 Accidental release measures
· Personal precautions, protective equipment and emergency procedures
Wear protective equipment. Keep unprotected persons away.
Ensure adequate ventilation
Keep away from ignition sources
· Environmental precautions:
Do not allow to enter sewers/ surface or ground water.
Prevent seepage into sewage system, workpits and cellars.
Dilute with plenty of water.
· Methods and material for containment and cleaning up:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to section 13.
Ensure adequate ventilation.
(Contd. on page 4)


Page 4
Page 4/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 5.0
Product name: BlueLube Polishing Lubricant
(Contd. of page 3)
59.1.0
· Reference to other sections
See Section 7 for information on safe handling.
See Section 8 for information on personal protection equipment.
See Section 13 for disposal information.
7 Handling and storage
· Handling:
· Precautions for safe handling
Protect from heat and direct sunlight.
Ensure proper ventilation/exhaustion at workplaces.
Open and handle receptacle with care.
Prevent formation of aerosols.
· Information about protection against explosions and fires:
Keep ignition sources away - Do not smoke.
Protect against electrostatic charges.
· Conditions for safe storage, including any incompatibilities
· Storage:
· Requirements to be met by storerooms and receptacles:
Store in a cool location.
No special requirements.
· Information about storage in one common storage facility: Not required.
· Further information about storage conditions:
Keep receptacle tightly sealed.
Store receptacle in a well ventilated area.
· Specific end use(s) No further relevant information available.
8 Exposure controls/personal protection
· Additional information about design of technical systems: No additional data. See 7.
· Control parameters
· Components with limit values that require monitoring at the workplace:
64-17-5 ethyl alcohol
PEL
Long-term value: 1900 mg/m³, 1000 ppm
REL
Long-term value: 1900 mg/m³, 1000 ppm
TLV
Short-term value: 1000 ppm
A3
67-63-0 isopropyl alcohol
PEL
Long-term value: 980 mg/m³, 400 ppm
REL
Short-term value: 1225 mg/m³, 500 ppm
Long-term value: 980 mg/m³, 400 ppm
TLV
Short-term value: 400 ppm
Long-term value: 200 ppm
BEI, A4
57-55-6 propylene glycol
WEEL Long-term value: 10 mg/m³
67-56-1 methyl alcohol
PEL
Long-term value: 260 mg/m³, 200 ppm
REL
Short-term value: 325 mg/m³, 250 ppm
Long-term value: 260 mg/m³, 200 ppm
Skin
TLV
Short-term value: 250 ppm
Long-term value: 200 ppm
Skin; BEIc
(Contd. on page 5)


Page 5
Page 5/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 5.0
Product name: BlueLube Polishing Lubricant
(Contd. of page 4)
59.1.0
108-10-1 methyl isobutyl ketone
PEL
Long-term value: 410 mg/m³, 100 ppm
REL
Short-term value: 300 mg/m³, 75 ppm
Long-term value: 205 mg/m³, 50 ppm
TLV
Short-term value: 75 ppm
Long-term value: 20 ppm
BEI, A3
· Ingredients with biological limit values:
67-63-0 isopropyl alcohol
BEI 40 mg/L
Medium: urine
Time: end of shift at end of workweek
Parameter: Acetone (background, nonspecific)
67-56-1 methyl alcohol
BEI 15 mg/L
Medium: urine
Time: end of shift
Parameter: Methanol (background, nonspecific)
108-10-1 methyl isobutyl ketone
BEI 1 mg/L
Medium: urine
Time: end of shift
Parameter: MIBK
· Exposure controls
· Personal protective equipment:
· General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Store protective clothing separately.
Avoid contact with the eyes.
Avoid contact with the eyes and skin.
· Breathing equipment: Use suitable respiratory protective device when high concentrations are present.
· Protection of hands:
Protective gloves
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation
· Material of gloves
Butyl rubber, BR
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer
to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance
and has therefore to be checked prior to the application.
· Eye protection:
Tightly sealed goggles
(Contd. on page 6)


Page 6
Page 6/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 5.0
Product name: BlueLube Polishing Lubricant
(Contd. of page 5)
59.1.0
9 Physical and chemical properties
· Information on basic physical and chemical properties
· General Information
· Appearance:
Form:
Liquid
Color:
Blue
· Odor:
Alcohol-like
· Odor threshold:
Not determined.
· pH-value:
Not determined.
· Change in condition
Melting point/Melting range:
Undetermined.
Boiling point/Boiling range:
78 °C (172.4 °F)
· Flash point:
26.7 °C (80.1 °F) (Pensky-Martens Closed Cup)
· Flammability (solid, gaseous):
Flammable.
· Auto igniting:
400 °C (752 °F)
· Decomposition temperature:
Not determined.
· Ignition temperature:
Product is not selfigniting.
· Danger of explosion:
Product is not explosive. However, formation of explosive air/vapor mixtures are possible.
· Explosion limits:
Lower:
3.3 Vol %
Upper:
19 Vol %
· Vapor pressure at 20 °C (68 °F):
66.7 hPa (50 mm Hg)
· Density at 20 °C (68 °F):
0.826 g/cm³ (6.893 lbs/gal)
· Relative density
Not determined.
· Vapor density at 20 °C (68 °F)
1.5 (Air=1)
· Specific gravity:
0.8 (Water = 1)
· Evaporation rate
Not determined.
· Solubility in / Miscibility with
Water:
Not miscible or difficult to mix.
· Partition coefficient (n-octanol/water): Not determined.
· Viscosity:
Dynamic:
Not determined.
Kinematic:
Not determined.
· Solvent content:
Organic solvents:
96.1 %
Water:
3.9 %
VOC content:
96.07 %
Solids content:
0.0 %
· Other information
No further relevant information available.
10 Stability and reactivity
· Reactivity No further relevant information available.
· Chemical stability
· Thermal decomposition / conditions to be avoided: No decomposition if used according to specifications.
· Possibility of hazardous reactions No dangerous reactions known.
· Conditions to avoid
Keep away from open flames. - No smoking.
(Contd. on page 7)


Page 7
Page 7/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 5.0
Product name: BlueLube Polishing Lubricant
(Contd. of page 6)
59.1.0
Keep away from heat.
Keep away from oxidising agents and acidic substances.
· Incompatible materials: No further relevant information available.
· Hazardous decomposition products: Carbon monoxide and carbon dioxide
· Additional information: Hazardous decomposition products may form during combustion.
11 Toxicological information
· Information on toxicological effects
· Acute toxicity:
· LD/LC50 values that are relevant for classification:
ATE (Acute Toxicity Estimate)
Oral
LD50
2,597 mg/kg
Dermal
LD50
7,792 mg/kg
Inhalative LC50/4 h 57.2-66 mg/l
  64-17-5 ethyl alcohol
Oral
LD50
7,060 mg/kg (rat)
Dermal
LD50
15,800 mg/kg (rabbit)
Inhalative LC50/4 h 20,000 mg/l (rat)
67-63-0 isopropyl alcohol
Oral
LD50
5,045 mg/kg (rat)
Dermal
LD50
12,800 mg/kg (rabbit)
Inhalative LC50/4 h 30 mg/l (rat)
57-55-6 propylene glycol
Oral
LD50
>2,000 mg/kg (rat)
Dermal
LD50
20,800 mg/kg (rabbit)
67-56-1 methyl alcohol
Oral
LD50
100 mg/kg (ATE)
Dermal
LD50
300 mg/kg (ATE)
Inhalative LC50/4 h 3 mg/l (ATE)
108-10-1 methyl isobutyl ketone
Oral
LD50
2,080 mg/kg (rat)
Dermal
LD50
16,000 mg/kg (rab)
Inhalative LC50/4 h 11 mg/l (ATE)
8.3-16.6 mg/l (rat)
· Primary chemical irritant effect:
· on the skin: No irritant effect.
· on the eye: Irritating effect.
· Sensitization: No sensitizing effects known.
· Additional toxicological information:
· Carcinogenic categories
· IARC (International Agency for Research on Cancer)
64-17-5 ethyl alcohol
1 
67-63-0 isopropyl alcohol
3 
108-10-1 methyl isobutyl ketone
2B
· NTP (National Toxicology Program)
None of the ingredients is listed.
(Contd. on page 8)


Page 8
Page 8/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 5.0
Product name: BlueLube Polishing Lubricant
(Contd. of page 7)
59.1.0
· OSHA-Ca (Occupational Safety & Health Administration)
None of the ingredients is listed.
12 Ecological information
· Toxicity
· Aquatic toxicity: No further relevant information available.
· Persistence and degradability No further relevant information available.
· Behavior in environmental systems:
· Bioaccumulative potential No further relevant information available.
· Mobility in soil No further relevant information available.
· Additional ecological information:
· General notes:
Water hazard class 1 (Self-assessment): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.
· Results of PBT and vPvB assessment
· PBT: Not applicable.
· vPvB: Not applicable.
· Other adverse effects No further relevant information available.
13 Disposal considerations
· Waste treatment methods
· Recommendation: Contact waste processors for recycling information.
· Uncleaned packagings:
· Recommendation: Disposal must be made according to official regulations.
14 Transport information
· UN-Number
· DOT, IMDG, IATA
UN1987
· UN proper shipping name
· DOT
Alcohols, n.o.s. (Ethanol, Isopropanol)
· IMDG
ALCOHOLS, N.O.S. (ETHANOL (ETHYL ALCOHOL),
ISOPROPANOL (ISOPROPYL ALCOHOL))
· IATA
ALCOHOLS, N.O.S. (ETHANOL, ISOPROPANOL (ISOPROPYL
ALCOHOL))
· Transport hazard class(es)
· DOT
· Class
3 Flammable liquids
· Label
3 
· IMDG, IATA
· Class
3 Flammable liquids
· Label
3 
(Contd. on page 9)


Page 9
Page 9/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 5.0
Product name: BlueLube Polishing Lubricant
(Contd. of page 8)
59.1.0
· Packing group
· DOT, IMDG, IATA
III
· Environmental hazards:
· Marine pollutant:
No
· Special precautions for user
Warning: Flammable liquids
· Hazard identification number (Kemler code):
30
· EMS Number:
F-E,S-D
· Stowage Category
A 
· Transport in bulk according to Annex II of MARPOL73/78 and
the IBC Code
Not applicable.
· Transport/Additional information:
· DOT
· Quantity limitations
On passenger aircraft/rail: 60 L
On cargo aircraft only: 220 L
· Limited quantities (LQ)
5L
· Transport category
3 
· Tunnel restriction code
D/E
· IMDG
· Limited quantities (LQ)
5L
· Excepted quantities (EQ)
Code: E1
Maximum net quantity per inner packaging: 30 ml
Maximum net quantity per outer packaging: 1000 ml
· UN "Model Regulation":
UN 1987 ALCOHOLS, N.O.S. (ETHANOL (ETHYL ALCOHOL),
ISOPROPANOL (ISOPROPYL ALCOHOL)), 3, III
15 Regulatory information
· Safety, health and environmental regulations/legislation specific for the substance or mixture
No further relevant information available.
· Sara
· Section 355 (extremely hazardous substances):
None of the ingredients is listed.
· Section 313 (Specific toxic chemical listings):
67-63-0 isopropyl alcohol
67-56-1 methyl alcohol
108-10-1 methyl isobutyl ketone
· TSCA (Toxic Substances Control Act):
All components have the value ACTIVE.
· Hazardous Air Pollutants
67-56-1 methyl alcohol
108-10-1 methyl isobutyl ketone
· Proposition 65
· Chemicals known to cause cancer:
108-10-1 methyl isobutyl ketone
· Chemicals known to cause reproductive toxicity for females:
None of the ingredients is listed.
· Chemicals known to cause reproductive toxicity for males:
None of the ingredients is listed.
(Contd. on page 10)


Page 10
Page 10/10
Safety Data Sheet
acc. to OSHA HCS
Printing date 07/02/2024
Last revision 06/01/2024
Version 5.0
Product name: BlueLube Polishing Lubricant
(Contd. of page 9)
59.1.0
· Chemicals known to cause developmental toxicity:
64-17-5 ethyl alcohol
67-56-1 methyl alcohol
108-10-1 methyl isobutyl ketone
· Chemical safety assessment: A Chemical Safety Assessment has not been carried out.
16 Other information
To the best of our knowledge, the information contained herein is accurate. However, it does not describe a guarantee of product properties
and does not establish a contractual legal relationship.
· Department issuing SDS: Technical Services
· Contact: Pablo Mendoza
· Last revision / supersedes version: 06/01/2024 / 4.0
· Supersedes date: 12/01/2022
· Abbreviations and acronyms:
ADR: Accord relatif au transport international des marchandises dangereuses par route (European Agreement Concerning the International Carriage of Dangerous Goods by
Road)
IMDG: International Maritime Code for Dangerous Goods
DOT: US Department of Transportation
IATA: International Air Transport Association
EINECS: European Inventory of Existing Commercial Chemical Substances
ELINCS: European List of Notified Chemical Substances
CAS: Chemical Abstracts Service (division of the American Chemical Society)
VOC: Volatile Organic Compounds (USA, EU)
LC50: Lethal concentration, 50 percent
LD50: Lethal dose, 50 percent
PBT: Persistent, Bioaccumulative and Toxic
vPvB: very Persistent and very Bioaccumulative
OSHA: Occupational Safety & Health
TLV: Threshold Limit Value
PEL: Permissible Exposure Limit
REL: Recommended Exposure Limit
BEI: Biological Exposure Limit
Flammable Liquids 2: Flammable liquids – Category 2
Flammable Liquids 3: Flammable liquids – Category 3
Acute Toxicity - Oral 3: Acute toxicity – Category 3
Acute Toxicity - Inhalation 4: Acute toxicity – Category 4
Eye Irritation 2A: Serious eye damage/eye irritation – Category 2A
Carcinogenicity 2: Carcinogenicity – Category 2
Specific Target Organ Toxicity - Single Exposure 1: Specific target organ toxicity (single exposure) – Category 1
Specific Target Organ Toxicity - Single Exposure 3: Specific target organ toxicity (single exposure) – Category 3
· * Data compared to the previous version altered.