THE GLOBAL POLISHING & ABRASIVES DIRECTORY查看数据库覆盖情况 ↗
POLISHXEN
POLISHX/Carbide End Mills
PRODUCT INFORMATION

Carbide End Mills

Consumables > Mechanical Milling > Carbide End Mills More Views: Made of solid carbide for maximum performance and durability, carbide end mills are used to cut metal (copper, aluminum, gold, solder, steel, NiCo), circuit board material and other non-metallics.2-Flute end mills have deeper, longer gullets for greater chip-carrying capacity, are center cutting and are available in diameters as small as 0.05 mm.4-Flute end mills last longer than 2-flute because wear is distributed over a greater…

Product / SKUAllied High Tech ProductsDiamond & CBN tools

Technical specifications

Manufacturer / publisherAllied High Tech Products
LanguageEnglish
Captured2026-10-17
Part numbers15-922F0.05; 15-922F0.25; 15-922F0.5; 15-922F0.7; 15-922F1.0; 15-922F1.5; 15-922F3.0; 15-922FP0.2; 15-922FP0.25; 15-922FP0.5; 15-922FP0.7; 15-922FP1.0; 15-922FP1.5; 15-922FP2.0; 15-922FP3.0; 15-922FS0.10; 15-922FS0.15; 15-922FS0.25; 15-922FS0.5; 15-922FS0.7; 15-922FS1.0; 15-922FS1.5; 15-922FS2.0; 15-922FS3.0; 15-924F0.7-3; 15-924F0.7; 15-924F1.0-3; 15-924F1.0; 15-924F1.5-3; 15-924F1.5; 15-924F3.0; 15-924FP0.7-3; 15-924FP0.7; 15-924FP1.0-3; 15-924FP1.0; 15-924FP1.5; 15-924FP2.0; 15-924FP3.0; 15-924FS0.7-3; 15-924FS0.7; 15-924FS1.0-3; 15-924FS1.0; 15-924FS1.5-3; 15-924FS1.5; 15-924FS2.0; 15-924FS3.0
CategoryDiamond & CBN tools
Updated2026-10-17T21:12:06.592434+00:00
Allied High Tech published content
Source: https://consumables.alliedhightech.com/product-p/cem.htm. Manufacturer claims and terminology are reproduced as source material.
English
Explore Consumables & part numbers ↗

  Consumables > Mechanical Milling >

Carbide End Mills
Carbide End Mills
 
More Views:
Made of solid carbide for maximum performance and durability, carbide end mills are used to cut metal (copper, aluminum, gold, solder, steel, NiCo), circuit board material and other non-metallics.

2-Flute end mills have deeper, longer gullets for greater chip-carrying capacity, are center cutting and are available in diameters as small as 0.05 mm.

4-Flute end mills last longer than 2-flute because wear is distributed over a greater area. They also remove material more quickly, produce finer finishes and can be moved across the sample at a higher rate.

4-Flute, Long Reach end mills feature cutting flutes that extend up from the tip approximately 3x the diameter of the tip to allow cutting into deep cavities.
SAFETY DATA SHEET


Item# Item Name
15-922F0.05 Carbide End Mill – Al/Cu, 2-Flute, 0.05 mm Ø x 38 mm L x 3 mm shank (Pk/4)
15-922F0.25 Carbide End Mill – Al/Cu, 2-Flute, 0.25 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922F0.5 Carbide End Mill – Al/Cu, 2-Flute, 0.5 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922F0.7 Carbide End Mill – Al/Cu, 2-Flute, 0.7 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922F1.0 Carbide End Mill – Al/Cu, 2-Flute, 1.0 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922F1.5 Carbide End Mill – Al/Cu, 2-Flute, 1.5 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922F3.0 Carbide End Mill – Al/Cu, 2-Flute, 3 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FP0.2 Carbide End Mill – PCB, 2-Flute, 0.2 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FP0.25 Carbide End Mill – PCB, 2-Flute, 0.25 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FP0.5 Carbide End Mill – PCB, 2-Flute, 0.5 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FP0.7 Carbide End Mill – PCB, 2-Flute, 0.7 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FP1.0 Carbide End Mill – PCB, 2-Flute, 1.0 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FP1.5 Carbide End Mill – PCB, 2-Flute, 1.5 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FP2.0 Carbide End Mill – PCB, 2-Flute, 2 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FP3.0 Carbide End Mill – PCB, 2-Flute, 3.0 mm Ø x 1.5” L x 3 mm shank (Pk/4)
15-922FS0.10 Carbide End Mill – Fe, 2-Flute, 0.10 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FS0.15 Carbide End Mill – Fe, 2-Flute, 0.15 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FS0.25 Carbide End Mill – Fe, 2-Flute, 0.25 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FS0.5 Carbide End Mill – Fe, 2-Flute, 0.5 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FS0.7 Carbide End Mill – Fe, 2-Flute, 0.7 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FS1.0 Carbide End Mill – Fe, 2-Flute, 1 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FS1.5 Carbide End Mill – Fe, 2-Flute, 1.5 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FS2.0 Carbide End Mill – Fe, 2-Flute, 2 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-922FS3.0 Carbide End Mill – Fe, 2-Flute, 3 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924F0.7-3 Carbide End Mill – Al/Cu, 4-Flute-LONG, 0.7 mm Ø x 1.5” L x 3 mm shank (Pk/4)
15-924F0.7 Carbide End Mill – Al/Cu, 4-Flute, 0.7 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924F1.0-3 Carbide End Mill – Al/Cu, 4-Flute-LONG, 1 mm Ø x 1.5” L x 3 mm shank (Pk/4)
15-924F1.0 Carbide End Mill – Al/Cu, 4-Flute, 1.0 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924F1.5-3 Carbide End Mill – Al/Cu, 4-Flute-LONG, 1.5 mm Ø x 1.5” L x 3 mm shank (Pk/4)
15-924F1.5 Carbide End Mill – Al/Cu, 4-Flute, 1.5 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924F3.0 Carbide End Mill – Al/Cu, 4-Flute, 3.0 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FP0.7-3 Carbide End Mill – PCB, 4-Flute-.LONG, 0.7 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FP0.7 Carbide End Mill – PCB, 4-Flute, 0.7 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FP1.0-3 Carbide End Mill – PCB, 4-Flute-.LONG, 1.0 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FP1.0 Carbide End Mill – PCB, 4-Flute, 1.0 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FP1.5 Carbide End Mill – PCB, 4-Flute, 1.5 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FP2.0 Carbide End Mill – PCB, 4-Flute, 2 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FP3.0 Carbide End Mill – PCB, 4-Flute, 3.0 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FS0.7-3 Carbide End Mill – Fe, 4-Flute LONG, 0.7 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FS0.7 Carbide End Mill – Fe, 4-Flute, 0.7 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FS1.0-3 Carbide End Mill – Fe, 4-Flute LONG, 1 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FS1.0 Carbide End Mill – Fe, 4-Flute, 1 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FS1.5-3 Carbide End Mill – Fe, 4-Flute LONG, 1.5 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FS1.5 Carbide End Mill – Fe, 4-Flute, 1.5 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FS2.0 Carbide End Mill – Fe, 4-Flute, 2 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
15-924FS3.0 Carbide End Mill – Fe, 4-Flute, 3 mm D x 1.5" (38 mm) L x 3 mm shank (Pk/4)
 


Extended Information:

This product can be used with Allied's X-Prep and other mechanical milling machines. Browse our machines >>




You May Also Be Interested In
Diamond Grinding Discs Diamond Bonded Tools X-Lube Cutting-Grinding-Polishing Fluid
Diamond Grinding Discs Diamond Bonded Tools X-Lube Cutting-Grinding-Polishing Fluid

Source documents

Related products & technical information

Product / SKU

Wafering Blades - Diamond Resin Bond

P05 · 2026-10-17T21:12:06.592434+00:00
Allied High Tech Products↗Product / SKU

Wafering Blades - Diamond Metal Bond

P05 · 2026-10-17T21:12:06.592434+00:00
Allied High Tech Products↗Product / SKU

Wafering Blades - CBN Bond

P05 · 2026-10-17T21:12:06.592434+00:00
Allied High Tech Products↗Technical document

Metal Bonded Diamond Discs

P05 · 2026-10-17T20:52:43.954326+00:00
Allied High Tech Products↗Technical document

Grinding Discs - Fine & Very Fine - for X-Prep

P05 · 2026-10-17T20:52:43.954326+00:00
Allied High Tech Products↗