TechCut 6x Product Spotlight-2025 Digital

Refer to the original PDF for tables, figures and page layout.

Page 1
TechCut 6x™
Precision Sectioning Machine 
Product Spotlight 


Page 2
•	
9" color LCD touchscreen to control all functions
•	
Intuitive interface optimized for productivity and efficiency
•	
Selectable units of measure — imperial or metric
•	
User programmable parameters for control of X (index), 
Y (feed) and Z (blade height) axis motions
•	
Selectable cutting force (low, medium, high)
•	
Display of estimated cut time and time remaining
•	
Closed-loop positional monitoring with live readout on 
X/Y/Z axes
•	
Closed-loop load monitoring for optimizing feed rate to 
reduce blade binding/breakage
•	
T-slot interface providing maximum versatility with a 
wide variety of fixtures/accessories
•	
Motorized X/Y/Z-axis sample/blade positioning with 
proportional joystick control
•	
Serial sectioning in either two (2) or three (3) axes
•	
Laser aid for quick, visual sample alignment
•	
Push-button spindle lock for easy blade changes
•	
Recirculating external coolant system 
Features:
02 ALLiED HIGH TECH PRODUCTS, INC.
PRODUCT SPOTLIGHT
TechCut 6x™ Introduction
Industry Leading Cut Capacity
The TechCut 6x™ is a precision multiaxis sectioning machine that 
is highly configurable for a wide variety of cutting applications. 
Featuring fully programmable X, Y and Z-axis control, the system 
enables automated, repeatable sectioning of a wide range of 
materials. 


Page 3
PRODUCT SPOTLIGHT
03
ALLiED HIGH TECH PRODUCTS, INC.
T-Slot Configurations
Adapter Plate Configurations
Servo Motor Advantage
Multiple Programmable Modes
Torque
0
500
1,000
1,500
2,000
2,500
3,000
3,500
4,000
4,500
5,000
Speed, RPM


Page 4
04 ALLiED HIGH TECH PRODUCTS, INC.
PRODUCT SPOTLIGHT
Surface Hardened Ferrous Gear
1-Axis Cut
In this single axis mode of motion, the sample is fed through 
the blade according to the user-input parameters controlling 
feed rate, cut length, blade RPM and force. 
 
Size: Ø 7" x 2.5" H (Ø 177.8 mm x 63.5 mm H)
Hardness: 35.0 HRC (center)


Page 5
Parameters Used
Blade RPM
3,500
Cut Length (Y)
4"–8" (102 mm–203 mm)
Feed Rate (Y)
0.75" (19 mm)/minute
Force
High
Time
5–10 minutes
05
ALLiED HIGH TECH PRODUCTS, INC.
Sectioning Configuration
Blade Type: 9" (230 mm) Aluminum Oxide, Resin Bond
Fixture: Vertical Clamp
PRODUCT SPOTLIGHT


Page 6
PRODUCT SPOTLIGHT
06 ALLiED HIGH TECH PRODUCTS, INC.
Ferrous Weld Section 
2-Axis Cut
Useful for cutting through larger samples, in this 2-axis 
mode of motion the blade height (Z-axis) is adjusted to the 
user defined interval and the sample is fed (Y-axis) into the 
blade (in serial) until sectioning is complete. 
Size: 6" L x 6" W x 3.25" H (152.4 mm L x 152.4 mm W x 82.55 mm H)
Hardness: 54.2 HRA (Center)


Page 7
PRODUCT SPOTLIGHT
07
ALLiED HIGH TECH PRODUCTS, INC.
Sectioning Configuration
Blade Type: 9" (230 mm) Aluminum Oxide, Resin Bond
Fixture: Vertical Clamp
Parameters Used
Blade RPM
3,000
Cut Length (Y)
8" (203 mm)
Feed Rate (Y)
1.5" (38 mm)/minute
Force
High
Depth Per Pass (Z)
0.5" (12.7 mm)
Total Depth (Z)
2.5" (63.5 mm)
Time
13–26 minutes


Page 8
PRODUCT SPOTLIGHT
Nitrided Ferrous Cylinder
Useful for cutting several pieces of similar thickness from 
a sample, in this 3-axis mode of motion the blade height 
(Z-axis) and sample indexing (X-axis) are adjusted to the user 
defined intervals and the sample is fed (Y-axis) into the blade 
(in serial) until the serial sectioning cycle is complete.  
Size: Ø 2.25" x 6" L (Ø 57.15 mm x 152.4 mm L)
Hardness: 41.4 HRC
3-Axis Cut


Page 9
09
ALLiED HIGH TECH PRODUCTS, INC.
PRODUCT SPOTLIGHT
Sectioning Configuration
Blade Type: 9" (230 mm) Aluminum Oxide, Resin Bond
Fixture: Quick-Slide Vise
Parameters Used
Blade RPM
3,000
Cut Length (Y)
4" (102 mm)
Feed Rate (Y)
1.5" (38 mm)/minute
Force
High
Sample Width (X)
0.25" (6.35 mm)
Blade Width
0.06" (1.5 mm)
Depth per Pass (Z)
1" (25.4 mm)
Total Depth (Z)
2" (50.8 mm)
Number of Samples
3
Time
10–16 minutes


Page 10
ALLiED HIGH TECH PRODUCTS, INC.
10
PRODUCT SPOTLIGHT
5-5650 
3-Axis Model (X-Y-Z)
5-5675 
2-Axis Model (Y-Z)
Two Models Available


Page 11
PRODUCT SPOTLIGHT
11
ALLiED HIGH TECH PRODUCTS, INC.
•	
Operating voltage: 200–240V 50/60 Hz 1 Phase
•	
Blade motor: powerful, constant torque output 
servo, 84.5 in-lb. (9.55 N-m) peak torque
•	
Blade speed: 100–5000 RPM, 100 RPM +/- 
increments, 1 RPM input resolution
•	
Blade range: 3–9" (76–230 mm) with either 0.5" 
(12.7 mm) or 1.25" (32 mm) arbor hole
•	
Y-axis feed rate: 0.01"–10" (0.1 mm –250 mm) 
per minute, 0.01" (0.1 mm) increments
•	
Y-axis maximum travel: 9" (230 mm), 0.01"      
(0.1 mm) increments
•	
X-axis maximum travel: 4" (100 mm), 0.001" 
(0.01 mm) increments
•	
Z-axis maximum travel: 3.6" (91 mm), 0.01"     
(0.1 mm) increments
•	
T-slot table dimensions: 11" W x 8.5" L (280 mm 
x 215 mm) with 0.5" (12.7 mm) T-slots
•	
Cutting capacity: up to 3.5" (89 mm) bar stock 
•	
Recirculating external coolant system: 7-gallon 
(26.5 L) capacity  
•	
Dimensions: 28.5" W x 24.5" D x 20.75" H      
(724 mm x 622 x 527 mm)
•	
Weight: 204 lb. (92.5 kg)  
•	
Two (2) year warranty
•	
Designed & manufactured by Allied in the USA
Technical Specs


Page 12
www.alliedhightech.com 
TechCut 6x™ Product Spotlight- 2025
Advancing technology
through sample preparation!