Transparent Thermoplastic Powder Cure Schedule

Refer to the original PDF for tables, figures and page layout.

Automatically recognized text. Verify numerical values against the original PDF.

Page 1
Cure Schedule — Transparent Thermoplastic

Mold Size

Number

Powder

Cure Time

Temp

Cool Time| Mold Pressure

Diameter

of Scoops | Amount (g)

(min)

(°C/°F)

(min)

(psi)

1" & 25 mm

1

13

5

200/392

4400

1.25" & 30 mm

1.5

20

6

200/392

4000

1.5"&40 mm

2

26

7

200/392

3800

2" & 50 mm

3

40

12-13

12-13

3500

130/266

Notes:

For single mounts. If duplexing, 1 minute may need to be added to the cure time.

Powder amount may vary depending upon the size of each sample.

All samples must be ultrasonically cleaned and dried to remove any debris and/or grease.

A mold release agent must be applied every time before a mounting cycle; Allied’s mold release

for hot mounting (#200-10004) is recommended.

Cure cycle times and temperatures may vary for non-Allied presses.