THE GLOBAL POLISHING & ABRASIVES DIRECTORYExplore database coverage ↗
POLISHX中文
POLISHX/Microgrit CEO cerium oxide polishing family
Product & technical reference

Microgrit CEO cerium oxide polishing family

Technical family reference for Micro Abrasives CEO cerium-oxide powders and Microclear CEO slurries. It separates powder families, high-purity grades and ready-to-use slurry grades, and treats all reported values as average production-lot properties rather than guaranteed specifications.

Technical profile

Manufacturer / publisherMicro Abrasives Corporation
Record typeProduct-family technical reference
Abrasive chemistryCerium oxide
Available formsPowders, compounds and formulated slurries
CEO #1–#5 particle-size span1–12 µm across the family
High-purity powder gradesCEO 1000, CEO 2000, CEO 1000ST, CEO 200ST
High-purity powder reported CeO₂ content95% or 99%
Slurry gradesMicroclear CEO 48 and Microclear CEO 24
Slurry pH range6.0–8.0
Slurry reported CeO₂ purity99%
Property statusAverage commercial-lot values; not guaranteed specifications
CategoryAbrasive grains & powders
Updated2026-10-12 20:37:29

CEO #1–#5 powder comparison

The five general-purpose CEO powders span different particle distributions, pH ranges and cerium-oxide contents. The speed labels below are comparative family labels, not a process guarantee.

CEO #11–10 µm range; 2 µm average; pH 7.0–8.0; REO 68%; CeO₂ 53%; medium-high speed
CEO #21–8 µm range; 1.5 µm average; pH 6.0–7.5; REO 70%; CeO₂ 55%; medium speed
CEO #31–12 µm range; 3 µm average; pH 7.5–8.5; REO 67%; CeO₂ 52%; high speed
CEO #41–8 µm range; 1.5 µm average; pH 6.5–7.5; REO 60%; CeO₂ 48%; medium speed
CEO #51–10 µm range; 2 µm average; pH 6.5–7.5; REO 50%; CeO₂ 40%; low speed

High-purity powder grades

These grades target superfinishing. ST grades use the lower reported pH band.

CEO 1000<5 µm range; 0.5 µm average; pH 5.0–6.2; CeO₂ 99%
CEO 2000<6 µm range; 1.5 µm average; pH 5.0–6.2; CeO₂ 99%
CEO 1000ST<5 µm range; 0.5 µm average; pH 3.0–4.2; CeO₂ 95%
CEO 200ST<6 µm range; 1.5 µm average; pH 3.0–4.2; CeO₂ 95%

Microclear CEO slurry grades

Both slurry grades are intended for precision polishing of optical glass, crystal and quartz where low roughness and high surface quality are required.

Microclear CEO 48Particle range ≤5 µm; average ≤0.5 µm; pH 6.0–8.0; CeO₂ purity 99%
Microclear CEO 24Particle range ≤10 µm; average ≤1 µm; pH 6.0–8.0; CeO₂ purity 99%

Selection notes

  • Use particle distribution and comparative removal speed to screen powder grades.
  • Use the reported pH band to check compatibility with the work material, carrier and equipment.
  • Validate finish, removal rate and residue behavior on the actual substrate before production release.
  • The family is described for ophthalmic work, precision optics, flat glass, crystals and cosmetic polishing; a grade-to-application mapping should be confirmed by trials.

Files & downloads

ceo-micro-abrasives-corp-9115ad0003bed7d4.html ↓ ceo-micro-abrasives-corp-9115ad0003bed7d4.json ↓

Related products & technical information