Deburring machine WEBER TTSC | Hans WEBER Maschinenfabrik GmbH
WEBER TTSC is a compact modular machine for deburring, edge rounding, descaling, slag removal and surface finishing of laser-cut, punched and nibbled parts. Up to three stations can combine multiple operations within one footprint.
Technical profile
| Manufacturer / publisher | Hans WEBER Maschinenfabrik |
|---|---|
| Category | Industrial grinding & sanding |
| Updated | 2026-10-11 17:51:31 |
Process configuration
Up to three stations can be arranged for sequential removal, rounding and finishing. This allows a part to pass through rough deburring and a secondary brush or planetary stage without a separate machine.
Contact-roller stage
The rubber-coated contact roller is lowered below the preset workpiece thickness to generate controlled grinding pressure. It supports rough grinding, surface finishing and removal of heavy fused laser spatter.
Roller hardnesses from 40 to 90 Shore and electric positioning allow the station to be matched to the workpiece and abrasive belt.
Edge rounding and slag removal
The R2 multi-rotation brush uses paired intermeshing brushes for uniform treatment of internal and external edges, including coated sheet where preserving the surface layer is important.
The P2 planetary slag-hammer configuration attacks plasma or oxy-fuel slag before downstream deburring, reducing load on later tools.
Operating considerations
Station order, abrasive, brush profile and pressure must be set around material, coating, burr height and finish target. Quick-access tool change supports frequent product changes, while extraction capacity must match the selected dry process.