Fiber Adhesive
-
Fast and safe logistics
-
Get samples for free
Take a Closer Look
Special Properties
Long life after mixing, easy to operate, low skin allergy, easy to seep into the fiber beam, when cured, the color turns from amber to crimson.
Fiber adhesive is generally recommended for other super-thick sections. When using, recommend turning it into colloid at room temperature or slightly higher dry room temperature, then raising the temperature to make it completely cured. It is suitable for brushing, dripping, watering, or mechanical drip process.
Curing Conditions
- 60 °C……… 1 hours 21 Minutes
- 80 °C……… 18 minutes
- 100 °C……… 6 minutes
- 120 °C……… 2 minutes
- 150 °C…………1 minute
How To Use It
- Pouch Package: The liquid inside the package is already matched, so it can be used after being squeezed to mix.
- Bottle Package: When used, the ratio of A agent and B agent is 10:1 to be mixed, stirred well and then apply. The mixture lasts about 10 hours (25 degrees room temperature).
Note
- Before using a lot, try it in small quantities and master the use of the product to avoid mistakes.
- This product should be stored in a cool, dry place; unused glue should be sealed in the container in time.
- If this product is in contact with the skin, clean it with alcohol, wrist soap, and water.
Physical Characteristics
Weight: Agent A 1.2; Agent B 1
Shore hardness: 89
Glassed temperature (Tg): > 110 degrees C
Bend strength: 13000PSi.
Pressure strength: 24000PSi.
Shear strength: 1800PSi.
Expansion coefficient (in/in/C): 51 degrees 10-6 in/C (below glassing temperature); 200 degrees 10-6in/in/C ((higher than glassing temperature)
Impact strength (ASTM-D-256-56): 0.361/1b.-in
Thermal conductivity: 0.36w/m.k
Weight increase percentage in 7 days at 96% humidity conditions: 0.02%
The heat-resistant cold (10 cycles from -55 to 150 degrees C): Pass
Specifications
-
Specifications
Item Compound Viscosity (mpas, 25℃) Ratio Using time Temperature resistance Fiber Adhesive A Translucent A: 2500-3000 10:1 10 hours -60~200℃ B Translucent B: 100-200